Top 9 Onboard Air System – Wheel & Tire Air Compressors & Inflators
As an Amazon Associate I earn from qualifying purchases.

Remote mount air filter assembly, 2. 0 gallon air tank, sealed compressor, 90 to 120PSI pressure switch and more!120 psi maximum working pressure and 25% duty cycle. Just connect your air line into our onboard air system. Recommended torque for 1/4 inches and 3/8 inches is 12 to 15 feet pounds.

Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools, except for air hose. Please check the manufacturer's website for a wiring diagram.

Designed for uninterrupted use for up to an hour! at 72 degrees ambient temperature One year manufacturer's defect warranty included with copy of the receipt. Designed to be installed and mounted onto the vehicle.





1. VIAIR
#ad
VIAIR 200 PSI Ultra Duty Onboard Air System
#adVIAIR #ad - Intended for inflation of tires up to 37 inches or to actuate air horns that require 200PSI. Air tank should be used with a drain cock and pressure release valve. 200 psi maximum working pressure, 1. 76 cfm @ 0 psi.More information #ad
One year manufacturer's defect warranty through manufacturer with receipt. Includes the essential components to install an onboard air system: 480C Air compressor, air tank fittings, 2. 5 gallon air tank, relay, pressure switch, air line and wiring. Can inflate a 37 inch tire from 0-30PSI in 7 minutes and 10 seconds.Brand | VIAIR #ad |
Manufacturer | Viair #ad |
Height | 9.9 Inches |
Length | 26 Inches |
Weight | 0.01 Pounds |
Width | 13 Inches |
Part Number | 20001 |
Model | 20001 |
Warranty | One year, manufacture's defect warranty covers defects in workmanship and materials only. For more information, please visit: http://www.viaircorp.com/warranty |
More information #ad
2. VIAIR
#ad
VIAIR 10002 Quarter Duty Onboard Air System
#adVIAIR #ad - Please note- use thread sealant for proper installation. Thread tape is not recommended. Designed to actuacte smaller air horns, air lockers and for minor load levelling adjustments.Remote mount air filter assembly, 2. 0 gallon air tank, sealed compressor, 90 to 120PSI pressure switch and more!120 psi maximum working pressure and 25% duty cycle. Just connect your air line into our onboard air system. Recommended torque for 1/4 inches and 3/8 inches is 12 to 15 feet pounds.
More information #ad
Properly sealed, recommended torque for 1/8 inches is 10 to 11 feet pounds. Can be used to inflate helper bags for load leveling, inflate four tires up to 31 inches in diameter or use with heavy duty air horns. Not intended for tire inflation. Includes all parts needed for installation of you very own onboard air solution for air lockers and small air horns.Brand | VIAIR #ad |
Manufacturer | Viair #ad |
Height | 10 Inches |
Length | 23 Inches |
Weight | 0 Pounds |
Width | 14 Inches |
Part Number | 10002 |
Model | 10002 |
Warranty | One year, manufacture's defect warranty covers defects in workmanship and materials only. For more information, please visit: http://www.viaircorp.com/warranty |
More information #ad
3. VIAIR
#ad
10003, VIAIR Medium Duty Onboard Air System
#adVIAIR #ad - Intended for inflation of tires up to 33 inch. One year manufacturer's defect warranty included with copy of the receipt. 150 psi maximum working pressure and 33% duty cycle.Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools, except for air hose. Please check the manufacturer's website for a wiring diagram.
More information #ad
Designed to be installed and mounted onto the vehicle. Comes with one viair 325c air compressor anda 110 to 145PSI pressure switch. Can be used to inflate helper bags for load leveling, inflate four tires up to 31 inches in diameter or use with heavy duty air horns.Brand | VIAIR #ad |
Manufacturer | Viair #ad |
Height | 10.25 Inches |
Length | 26.5 Inches |
Weight | 10.25 Pounds |
Width | 14.25 Inches |
Part Number | 10003 |
Model | 10003 |
Warranty | All VIAIR products come with a One Year Manufacturer Defect Warranty |
More information #ad
4. VIAIR
#ad
10007, VIAIR Constant Duty Onboard Air System
#adVIAIR #ad - Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools. Intended for inflation of tires up to 37 inches.Designed for uninterrupted use for up to an hour! at 72 degrees ambient temperature One year manufacturer's defect warranty included with copy of the receipt. Designed to be installed and mounted onto the vehicle.
More information #ad
Comes with a viair 450c air compressor and a 110 to 145 PSI Pressure switch. Can inflate four tires up to 37 inches in diameter. Please check the manufacturer's website for a wiring diagram. 150 psi maximum working pressure and 100% duty cycle at 100 PSI; 20feet 12-Gauge Wire with Inline Fuse Holder. Ingress protection Rating: IP67.Brand | VIAIR #ad |
Manufacturer | Viair #ad |
Height | 10 Inches |
Length | 26.5 Inches |
Weight | 33.85 Pounds |
Width | 14.5 Inches |
Part Number | 10007 |
Model | 10007 |
Warranty | All VIAIR products come with a One Year Manufacturer Defect Warranty |
More information #ad
5. ARB
#ad
ARB CKMA12 Air Compressor High Output On-Board 12V Air Compressor
#adARB #ad - Quality components for quiet operation and extra long life. Sealed for moisture and dust resistance. Heavy duty maxi-fuse equipped for professional in-line circuit protection.More information #ad
Constructed entirely of lightweight, high strength engineering grade materials. Hard-anodized cylinder bore for reduced friction.Brand | ARB #ad |
Manufacturer | ARB #ad |
Height | 5.88 Inches |
Length | 12.73 Inches |
Weight | 0.1 Pounds |
Width | 9.16 Inches |
Part Number | CKMA12 |
Model | CKMA12 |
More information #ad
6. VIAIR
#ad
VIAIR Heavy Duty Onboard Air System
#adVIAIR #ad - 150 psi maximum working pressure and 33% duty cycle. Designed to be installed and mounted onto the vehicle. 33 percent duty cycle and 2. 54 cfm maximum flow.More information #ad
Remote mount air filter assembly sealed compressor. Intended for inflation of tires up to 35 inches. Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools.Brand | VIAIR #ad |
Manufacturer | Viair #ad |
Height | 10 Inches |
Length | 26.5 Inches |
Weight | 0.01 Pounds |
Width | 14.5 Inches |
Part Number | 10005 |
Model | 10005 |
Warranty | All VIAIR products come with a One Year Manufacturer Defect Warranty |
More information #ad
7. VIAIR
#ad
27 x 23 x 11, 1 Pack, Stealth Black, VIAIR 20020 Dual 444C Onboard Air Kit
#adVIAIR #ad - Working pressure: 200 PSI. Duty cycle: 100% at 100 psi. Universal fitment. 2 444c viair chrome or Stealth Black compressors. 2. 5 gallon 200 psi VIAIR air tank. Max.More information #ad
Brand | VIAIR #ad |
Manufacturer | VIAIR #ad |
Height | 11.5 Inches |
Length | 27 Inches |
Weight | 53 Pounds |
Width | 23 Inches |
Part Number | 20020 |
Model | 20020 |
Warranty | 1 Year Manufacturer Defect Warranty |
More information #ad
8. VIAIR
#ad
VIAIR X'treme Duty Onboard Air System,10009
#adVIAIR #ad - Ingress protection Rating: IP67. Can inflate four tires up to 40 inches in diameter. Intended for inflation of up to 37" tires. Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools.More information #ad
Please check the manufacturer's website for a wiring diagram. 150 psi maximum working pressure and 33% duty cycle. Comes with two viair 350c air compressors and a 110 to 145 PSI Pressure switch. Designed to be installed and mounted onto the vehicle. One year manufacturer's defect warranty included with copy of the receipt.Brand | VIAIR #ad |
Manufacturer | Viair #ad |
Height | 10.5 Inches |
Length | 29.5 Inches |
Weight | 10.5 Pounds |
Width | 14.25 Inches |
Part Number | 10009 |
Model | 10009 |
Warranty | One year, manufacture's defect warranty covers defects in workmanship and materials only. For more information, please visit: http://www.viaircorp.com/warranty |
More information #ad
9. Vixen Horns
#ad
Vixen Horns 2.5 Gallon 9.5 Liter Train/Air Horn Tank with 200 PSI Compressor Onboard System/Kit 12V VXO8325
#adVixen Horns #ad - Precision Welded. Tank capacity: 2. 5 gallon 9. 5 liter. 12 volt 200 psI Compressor. Anti-corrosion Coating. Pressure gauge, pressure Switch, Air Hose and Mounting Hardware Included.More information #ad
Brand | Vixen Horns #ad |
Manufacturer | Vixen Horns #ad |
Part Number | VXO8325 |
Model | 5841732950 |
More information #ad