As an Amazon Associate I earn from qualifying purchases.

1. Ski-Doo

#ad

Ski-Doo 860200580 Woody Executive Ski Carbide

#adSki-Doo #ad - Provides proper balance with a studded track. Executive carbides - rev gen4, xu tundra, XS, XP, XR, XM. Pack of 2. 1/2" round preformed material swedged at each end to best fit ski contour fitted with 8" of 60° turning carbidepack of 2. Performance trail riders are known to use this runner.

Brand	Ski-Doo #ad
Manufacturer	Ski-Doo #ad
Height	7 Inches
Length	27 Inches
Width	4 Inches
Part Number	860200580
Model	860200580

2. Woody's

#ad

Woodys Dooly Carbide Wear Rods, 6in. DY6-6580

#adWoody's #ad - Each wear rod features two 7/16in. 16 mounting studs ensure secure fit. Carbide carry 60 degree carbide. And 8in. Runners with center carbide. Hardweld at front of wear rod and 1. 5in. Durable 3/8in. Dooly wear bars create four parallel traction lines for dramatically decreased darting and enhanced handling. Carbide contains 90 degree carbide; 6in. Carbide pad at the back. 4in.

Brand	Woody's #ad
Manufacturer	Woodys #ad
Height	1 Inches
Length	35 Inches
Width	5 Inches
Part Number	DY66580
Model	DY66580

3. SnowStuds

#ad

6" Round Bar 1/2" Snowmobile Ski Carbides Pair- Yamaha Tuner Ski RM6906

#adSnowStuds #ad - Snowstuds magnum 69 series 6" Carbide Runners Sold in Pairs. Front and rear wear pads promote longer bar life. The industry’s most aggressive carbide runner. Large 2″ pieces of 60 deg Turning carbide on a 1/2″ host bar. Exclusive leading edge wear pad keeps steering carbide sharp longer.

Brand	SnowStuds #ad
Manufacturer	SnowStuds #ad
Part Number	RM6906

4. Woody's

#ad

Woodys Extender Trail III Flat-Top Carbide Runners EAT3-9975

#adWoody's #ad - Full-length hardweld surfaces between all three carbide inserts for total wear protection. 4in. 60deg. Edge angle for performance cornering; 1 1/2in. Turning carbide that has a sharp. Carbide wear pads help extend runner life. Extra-long studs make it easy to mount plastic ski skins. Woodys most popular carbide.

Brand	Woody's #ad
Manufacturer	WOODYS #ad
Height	0.5 Inches
Length	35.25 Inches
Width	5.25 Inches
Part Number	EAT39975

5. Biteharder

#ad

BITEHARDER Carbide Runner Sharpening Tool Standard Series

#adBiteharder #ad - Our standard series tools are designed to be used with a portable drill for anywhere sharpening convenience trailside, trailer or garage. Experience all of the performance your snowmobile has to offer all season long. With proper use our industrial diamond cutting media allows you to maintain your carbide runners edge over their entire useful life. Sharp edges provide improved control, handling and performance in all conditions. Better control of your snowmobile results in a much safer ride.

Brand	Biteharder #ad
Manufacturer	BITEHARDER #ad
Height	1 Inches
Length	5 Inches
Width	1 Inches
Part Number	CRST150-60-STD
Model	CRST150-60-STD
Warranty	Limited Manufacturer

6. SnowStuds

#ad

4" Round Bar 1/2" Snowmobile Ski Carbides Pair- Ski-Doo RM4204

#adSnowStuds #ad - Exclusive leading edge wear pad keeps steering carbide sharp longer. The industry’s most aggressive carbide runner. Snowstuds magnum 42 series 4" Carbide Runners Sold in Pairs. Front and rear wear pads promote longer bar life. Large 2″ pieces of 60 deg Turning carbide on a 1/2″ host bar.

Brand	SnowStuds #ad
Manufacturer	SnowStuds #ad
Height	50 Centimeters
Length	100 Centimeters
Weight	100 Kilograms
Width	100 Centimeters
Part Number	RM4204

7. Polaris

#ad

Part 2874334, Polaris Snowmobiles SIDEHILLER­ II Carbide Snowmobile Runner

#adPolaris #ad - For schematic location 12 only. Exclusively designed to fit on the Polaris SideHiller II Ski. Includes one runner and hardware for application on one ski. To verify fitment for your specific vehicle, please contact us, and provide us with your VIN that can be found on your vehicle or your insurance card. Of 60 degree carbide that will improve steering and eliminate trail darting. Features 4 in.

Brand	Polaris #ad
Manufacturer	Polaris #ad
Part Number	2874334

8. Polaris

#ad

Polaris Snowmobiles 60° 3 in. Executive Carbide Skags – Gripper Ski, Part 2875723

#adPolaris #ad - Improves the steering response of a sled in all types of riding conditions. These are the only skags thoroughly tested and approved for use on all Polaris Snowmobiles. Similir skags may be available elsewhere. To verify fitment for your specific vehicle, please contact us, and provide us with your VIN that can be found on your vehicle or your insurance card. For schematic location 24 only.

Brand	Polaris #ad
Manufacturer	Polaris #ad
Height	9 Inches
Length	29 Inches
Width	2 Inches
Part Number	2875723