Top 8 1996 Ford F150 Shocks – Automotive Replacement Shocks

As an Amazon Associate I earn from qualifying purchases.

1. Maxorber


Maxorber Full Set Shocks Struts Absorber Front Rear Kit Compatible with F-150 F-250 F-350 1980-1997 Shock Absorber 344077 344049 37037 37095 37011

Maxorber #ad - Interchange/cross part number: 344077 344049 37037 37095 37011. Premium qualified finish: rust protection; nitrogen Gas charged: improved stopping, steering, stability. Japanese made oil seals: no squeaking noise, long durability; Chromed Piston Rod: suitable stiff dampening power for passenger cars.

Please feel free to if you have any other concern. Compatible with f-150 f-250 f-350 1980-1997 Shock Absorber. Shocks struts replacement to restore your vehicle ride, handling and control performance. If 4pcs purchased, each pair of front OR rear shocks will be packed and shipped as an unique unit.

Important note: for the sake of safety, if 2pcs purchaseed, there will be 1 package. Shock absorbers for left h driver side and right h passenger side; Shock Absorbers only, not including springs or mounts. Chromed piston Rod: suitable stiff dampening power for passenger cars. Thus, there will be 2 packages and so on.
BrandMaxorber #ad
ManufacturerMaxorber #ad
Height2.76 Inches
Length19.69 Inches
Width2.76 Inches
Part Number159890

2. Skyjacker


Skyjacker B8560 Black MAX Shock Absorber with Black Boot

Skyjacker #ad - Collapsed Length:17. 3. Vehicle specific Multi-Stage Valving. 373 degree arc welded end Mounts and 180 Degree Directional Mounting. Advanced Foam-Cell Technology. Increased fluid Capacity for MAX Heat Dissipation. Twin tube construction with Chrome Plated Shaft.
BrandSkyjacker #ad
ManufacturerSkyjacker #ad
Height3 Inches
Length24.4 Inches
Weight6 Pounds
Width3.2 Inches
Part NumberB8560

3. Monroe


Monroe 34729 Gas-Magnum Truck Shock Absorber

Monroe #ad - 1-3/8 inch bore: lower operating pressure than standard 1 inch bore units. On non-dust shield units only. 2 inch reserve Tube: More fluid for more consistent performance. Made in China. 5/8 inch piston rod: heavy-duty nitro carburized rod for long service life.
BrandMonroe #ad
ManufacturerMonroe Shocks & Struts #ad
Height2.2 Inches
Length19.7 Inches
Weight2.6 Pounds
Width4.1 Inches
Part Number34729

4. KYB


KYB 344049 Excel-G Gas Shock

KYB #ad - Triple chrome plated piston rod and multi-lip oil seals that reduce wear. Solid seamless mounting eye rings and bolt bushings to eliminate rattles. Specifically calibrated to help restore original handling and control characteristics. Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life. Kyb recommended OEM replacement shock for domestic trucks.
BrandKYB #ad
ManufacturerKYB #ad
Height0 Inches
Length0 Inches
Weight3 Pounds
Width0 Inches
Part Number344049
WarrantyKYB Limited Warranty warrants to the original retail purchaser that each new KYB product purchased from an authorized KYB dealer shall be free from defects for the specific periods listed below, when used on private passenger vehicles and light trucks for personal use under normal operating conditions. Warranty Period A. lifetime: All KYB Shocks Absorbers, Struts, and Strut Cartridges (Except KYB Strut-Plus TM, Air, Electric or Self Leveling). Note: lifetime means for as long as the original retail purchaser owns the vehicle on which KYB products were originally installed. B. One(1) Year: All KYB Strut-Plus, KYB Strut Mounts, Boots and Steering Stabilizers. What is Covered by this Warranty? The warranty covers defect in material and workmanship in the KYB product. KYB's sole and exclusive obligation under this warranty is limited to the exchange / replacement of a defective KYB product in accordance with this limited warranty. A valid copy of the original dated retail prooof of purchase receipt must accompany any warranty claim. Please Refer to the KYB Limited warranty for further details.

5. Detroit Axle


2WD Front & Rear Shock Absorbers Replacement for Ford Bronco F-150 F-250 F-350, Detroit Axle

Detroit Axle #ad - Detroit axle strut assemblies are complete and ready for installation with no additional work or special tool required for installation. Kit includes: 4x complete Front & Rear Shock Absorber Assemblies. 10-year Warranty. Fits: specific models - check Fitment Chart and Product Description for Accurate Information. Fits 2wd Models.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height11 Inches
Length19 Inches
Weight11.49 Pounds
Width24 Inches
Part Number10351-4

6. Gabriel


Gabriel 43167 Rear Load Carrier

Gabriel #ad - Product does Not Increase Payload. Variable-rate rear coil springs provide 500 lbs. Combines shock And Spring Technology. Per pair of load capacity Not To Exceed Vehicle Gvwr Gross Vehicle Weight Rating. Constant-rate front coil springs Can Help Improve Stability And Restore Or Maintain Ride Height. An economical Solution For Heavier Duty Use.
BrandGabriel #ad
ManufacturerGabriel #ad
Height3.5 Inches
Length26.62 Inches
Weight15 Pounds
Width7 Inches
Part Number43167
WarrantyWarranty netted into the price

7. Mid Valley


2Pcs Front Coil Spring Tower Shock Mount Right & Left Set for Ford F150 924-405,924-406, Mid Valley

Mid Valley #ad - Coil spring Tower Shock Mount. Interchange part number:924-405, 924-406, e0tz5a306E, NI E2TZ5A306J. Support one year warranty, we guarantees all products to be free from defects in materials and workmanship when properly installed and under normal usage to the original purchaser and for the original vehicle parts were installed on.

For 1980-96 ford bronco without quad shocks without snow plow package for 1983 ford f100 truck over 4750lb gvw for 1982 ford f100 truck over 4750lb gvw built after 4/82 production date for 1982 ford f100 truck with california Emissions Built Before 6/82 Production Date For 1980-81 Ford F100 Truck with California Emissions For 1980-96 Ford F150 Truck 4 Wheel Drive without Quad Shocks without Snow Plow Package For 1980-96 Ford F150 Truck Rear Wheel Drive.
BrandMid Valley #ad
ManufacturerMid Valley #ad
Part NumberAELS053AELS054

8. Monroe


Monroe 34964 Gas-Magnum Truck Shock Absorber

Monroe #ad - On non-dust shield units only. 5/8 inch piston rod: heavy-duty nitro carburized rod for long service life. Made in China. 2 inch reserve Tube: More fluid for more consistent performance. 1-3/8 inch bore: lower operating pressure than standard 1 inch bore units.
BrandMonroe #ad
ManufacturerMonroe Shocks & Struts #ad
Height2.3 Inches
Length21.1 Inches
Weight6 Pounds
Width4.1 Inches
Part Number34964