Top 6 Braided Brake Hose – Automotive Replacement Brake Hydraulic Parts
As an Amazon Associate I earn from qualifying purchases.





Edelbrock's r&d staff is not only well qualified at their respective positions, or an engine, but they're also automotive enthusiasts who do more than work in the automotive aftermarket--they live it--and it's at that point where understanding the inner workings of a supercharger, EFI system becomes second nature.
Whether they're manifolds, or carburetors, superchargers, fuel injection systems, nitrous systems, cylinder heads, you can rest assured that the final product was directly influenced by the passion for performance that is an integral part of our Edelbrock team. Every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment.
1. The Stop Shop
#ad
Universal Braided SS Brake Hose, 15" Long with 10mm Banjo Includes hardware Made in USA
#adThe Stop Shop #ad - Commonly used in disc brake conversion kits with metric calipers. 15" long. Includes: 2 hoses, 2 banjo bolts10x1mm, 4 copper washers, 2 clips.More information #ad
3/8-24 female inlet for inverted flare most common 3/16 tube nut. This is not a vehicle specific item, please see the length and ends described in the bullet points to see if it fits your application.Brand | The Stop Shop #ad |
Manufacturer | The Stop Shop #ad |
Part Number | HK2 |
More information #ad
2. The Stop Shop
#ad
Universal Braided SS Brake Hose, 16" Long with 7/16" Banjo Includes hardware Made in USA
#adThe Stop Shop #ad - Commonly used in disc brake conversions. 3/8-24 female inlet for inverted flare most common 3/16 tube nut. These are not vehicle specific, please check the bullet points for length and banjo sizes. 16" long. Includes: 2 hoses, 2 banjo bolts7/16-20, 4 copper washers, 2 clips.More information #ad
Brand | The Stop Shop #ad |
Manufacturer | The Stop Shop #ad |
Part Number | HK1 |
More information #ad
3. autobahn88
#ad
Hydraulic. Silver. -3AN, 5 Feet, Clutch, autobahn88 PTFE Teflon Hose with High Tensile Stainless Steel Braided Single Layer fits for Fluids : Brake
#adautobahn88 #ad - Material: ptfe teflon inner Tube with Fire Resistant Stainless Steel Braiding. Provide essential protection and resistance to high pressure, temperature, vibration and fire hazard.More information #ad
Works with all ptfe hose end Fittings and Stainless Steel Brake Fittings. Design for Motorsport and Racing. Max psi: 2000 Id size: 1/8", 3. 18mm; od size: 17/64", 6. 72mm. Operation temperature ranges from -40F to 200F.Brand | autobahn88 #ad |
Manufacturer | autobahn88 #ad |
Height | 1.57 Inches |
Length | 11.81 Inches |
Width | 11.81 Inches |
Part Number | HS020-A03-5F |
More information #ad
4. The Stop Shop
#ad
Universal Rear Braided SS Brake Hose, 14" Long with mouting block
#adThe Stop Shop #ad - Commonly used on hotrods. 7/16-24 female inlet for inverted flare. This item is not vehicle specific, you will need to pay attention to the length of this item as well as the inlet sizes on this item.More information #ad
Attached mounting block with 2 - 3/8-24 ports for rear axle brake lines. 14" long to center of hole in mounting block.Brand | The Stop Shop #ad |
Manufacturer | The Stop Shop #ad |
Part Number | RK1 |
More information #ad
5. Rough Country
#ad
Rough Country 89702 Extended Stainless Brake Lines Front | fits 87-06 Jeep Wrangler YJ TJ / 84-01 Cherokee XJ | 4-6" |
#adRough Country #ad - Technical notes: only fits models with 4-6 inch of suspension Lift. Fits: 97-06 4wd jeep wrangler tj; 04-06 4wd jeep wrangler tj unlimited; 87-95 4wD Jeep Wrangler YJ; 84-01 4WD/2WD Jeep Cherokee XJ. Installation time: 3-4 hours. In the box: 2 stainless Steel braided Brake Lines, hardware.More information #ad
Brand | Rough Country #ad |
Manufacturer | Rough Country #ad |
Height | 2.5 Inches |
Length | 12 Inches |
Width | 4.25 Inches |
Part Number | 89702 |
Model | 89702 |
Warranty | Limited Lifetime Warranty |
More information #ad
6. Edelbrock
#ad
Russell 656062 Endura Straight -3AN to Straight -3AN Brake Hose, 24"
#adEdelbrock #ad - In a day and age where we are seeing more products sent overseas to be manufactured, Edelbrock sees value in the quality control of American manufacturing by American workers and we are proud of our casting and manufacturing facilities.Edelbrock's r&d staff is not only well qualified at their respective positions, or an engine, but they're also automotive enthusiasts who do more than work in the automotive aftermarket--they live it--and it's at that point where understanding the inner workings of a supercharger, EFI system becomes second nature.
More information #ad
Edelbrock facilities have earned the world recognized ISO 9001: 2008 registration for quality. Whether they're manifolds, or carburetors, superchargers, fuel injection systems, nitrous systems, cylinder heads, you can rest assured that the final product was directly influenced by the passion for performance that is an integral part of our Edelbrock team. Every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment.
Brand | Edelbrock #ad |
Manufacturer | Edelbrock #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 0.26 Pounds |
Width | 0 Inches |
Part Number | RUS-656062 |
Model | 656062 |
Warranty | Edelbrock, LLC shall not be liable for any and all consequential damages occasioned by the breach of any written or implied warranty pertaining to this sale in excess of the purchase price of the product sold. |
More information #ad