As an Amazon Associate I earn from qualifying purchases.
Buy with confidence! the following product is compatible with: 2005 saab 9-2x 2. 5l non-turbo ej25, 2003-06 subaru baja 2. 5l non-turbo ej25, 2013-19 brz 2. 0l fa20, 1998-17 impreza 2. 0l non-turbo; 2. 5l non-turbo, 2016-18 crosstrek 2. 0l fa20, 2013-15 xv crosstrek 2. 0l fa20, 1996-09 legacy 2. 0l ; 2. 5l non-turbo; 3. 0l 6cyl, Forester 2.
Speedway Motors #ad - Will not work with ram couplers or mini clutches because of limited extension on our hydraulic throwout bearing,. 688" travel. Bearing typically used with all oem & 4-spds, muncie 4-spds, Borg-Warner 4-spds, Jerico 2 & OEM replacement clutches, Saginaw 3 & 4-spds.
Southwest Speed #ad - Southwest speed throwout bearing # 650-4035 > replaces gm part # 19245400 > Exact Replica of the original > Designed to effectively reduce friction > Made of high quality materials for long service life. Factory applications: > 1966 - 1972 chevy chevelle, 4 speed > 1968 - 1972 nova, 4 speed > 1964 - 81 impala, 4 speed > 1966 - 1981 chevy corvette, 4 speed > 1967 - 1972 camaro, 4 Speed > Fits all Applications using a 168 tooth Flywheel.
Kit includes: | southwest speed clutch fork with ball retaining spring # 650-4028 > replaces gm part # 3892632 > exact replica of the Original > Fits All Models with 10 1/2" or 11" clutches and 153 tooth or 168 tooth Flywheels > Fits All Small Block or Big Block Chevrolet Engines with Manual Transmission only.
Southwest speed clutch fork boot # 650-3952 > replaces gm part # 3993851 > exact replica of the original > molded from e. P. D. M rubber for a snug fit that will last for years | southwest speed standard clutch fork pivot Ball # 650-4018 > Replaces GM Part # 3729000 > Installs into bellhousing to support clutch fork > 13/16"-16 Threads, 1 1/2" total length end to end.
Speedway Motors #ad - Lower pedal effort compared to stock-type mechanical clutch linkage. Works with single or multi-disc 5. 5-inch to 7. 25-inch diameter racing clutches. Kit includes throwout bearing, fittings, bolt kit, and the AN line to connect to the master cylinder.
Remote bleeder hose kit: allows you to bleed the throwout bearing from outside the bellhousing | 1/8" NPT male to 1/8" NPT female | 15" Long.
Will not work with stock clutches | works with saginaw, Muncie, Quarter Master, including Ram, Tilton, GM T-10 & Jerico transmissions, as the inside diameter of this throwout bearing is 1.400" | will not fit t-5 or non-gm T-10 transmissions | Lightweight Aluminum Construction. Features: hydraulic throwout bearing: compatible with most reduced diameter racing mini-clutches, as well as any transmission that has a bearing retainer collar with an outside diameter of 1. 395" or less, etc.
1. ClutchMax
#adClutchMaxPRO Clutch Throwout Release Bearing & Repair Sleeve Kit Compatible with 1998-2017 Subaru Baja BRZ Crosstrek Impreza Forester Legaxy Outback Scion FR-S Toyota 86 Saab 92X CPRB0904SK
#adClutchMax #ad - Premium clutch you can feel and trust: clutchmaxpro is defining a new meaning of affordable performance clutch. To ensure highest quality and satisfaction. Clutch release bearing key features: self-aligning Design, Eliminates noisy clutch linkage rattles, Noticeable smoothness to the clutch engagement, Eliminates the chance of costly mistakes in replacing the case, Steel construction.More information #ad
Limited warranty: all clutchmaxpro products comes with excellent customer support and limited manufacturer warranty of 12 months or 15, 000 miles that covers issues related to performance, fitment and function. Buy with confidence! the following product is compatible with: 2005 saab 9-2x 2. 5l non-turbo ej25, 2003-06 subaru baja 2. 5l non-turbo ej25, 2013-19 brz 2. 0l fa20, 1998-17 impreza 2. 0l non-turbo; 2. 5l non-turbo, 2016-18 crosstrek 2. 0l fa20, 2013-15 xv crosstrek 2. 0l fa20, 1996-09 legacy 2. 0l ; 2. 5l non-turbo; 3. 0l 6cyl, Forester 2.
| Brand | ClutchMax #ad |
| Manufacturer | ClutchMax #ad |
| Part Number | CPRB0904SK |
More information #ad
2. Speedway Motors
#adHydraulic Throwout Bearing And Hose Kit
#adMore information #ad
Complete hydraulic throwout bearing and hose kit for stock-style 3-speed and 4-speed Chevy clutches only. Includes a speedway gm stock clutch hydraulic throwout Bearing, Bleeder Screw Assembly, 1/8" NPT adapter fitting, and AN4 Braided Stainless 12" Line. Comes with detailed instructions for a painless installation.| Brand | Speedway Motors #ad |
| Manufacturer | Speedway Motors #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 3 Pounds |
| Width | 0 Inches |
| Part Number | 91605004 |
More information #ad
3. Southwest Speed
#ad3729000, 3993851, CLUTCH PIVOT BALL FOR GM 621 3899621 BELLHOUSINGS, CLUTCH FORK, CLUTCH FORK BOOT, NEW GM THROWOUT BEARING, 19245400, REPLACES GM 3892632
#adKit includes: | southwest speed clutch fork with ball retaining spring # 650-4028 > replaces gm part # 3892632 > exact replica of the Original > Fits All Models with 10 1/2" or 11" clutches and 153 tooth or 168 tooth Flywheels > Fits All Small Block or Big Block Chevrolet Engines with Manual Transmission only.
More information #ad
Brand new southwest speed clutch fork, as well as nearly all gm bellhousings that use both 153 tooth and 168 tooth flywheels and 10 1/2" and 11" clutches sws part # 650-4028, 650-4035, 650-3952, throwout bearing, clutch fork boot, throwout bearing, and 650-4018 > this southwest speed clutch fork, and Clutch Fork Pivot Ball Kit that fits the GM 3899621 11" Bellhousing, Clutch Fork Boot, and Pivot Ball is a exact replica of the GM OEM parts. Southwest speed clutch fork boot # 650-3952 > replaces gm part # 3993851 > exact replica of the original > molded from e. P. D. M rubber for a snug fit that will last for years | southwest speed standard clutch fork pivot Ball # 650-4018 > Replaces GM Part # 3729000 > Installs into bellhousing to support clutch fork > 13/16"-16 Threads, 1 1/2" total length end to end.
| Brand | Southwest Speed #ad |
| Manufacturer | Southwest Speed #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0 Pounds |
| Width | 0 Inches |
| Part Number | 650-4028_4035_3952_4018 |
| Model | 650-4028_4035_3952_4018 |
| Warranty | Parts |
More information #ad
4. Southwest Speed
#adNEW 36" STEEL BRAIDED CLUTCH HOSE KIT TO CONNECT MASTER CYLINDER TO SLAVE CYLINDER OR HYDRAULIC THROWOUT BEARING
#adSouthwest Speed #ad - 4 an to 1/8" -24 fitting with Sealing Washer For Master Cylinder. Connects master cylinder To Slave Cylinder Or Hydraulic Throwout Bearing.More information #ad
Brand new southwest speed clutch hose kit, Steel Braid, 36" SWS Part # 390-013. 4 an to 1/8" npt fitting. 36" long, -4 an steel braided hose with One Straight End And One 90 Degree End.| Brand | Southwest Speed #ad |
| Manufacturer | Southwest Speed #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0 Pounds |
| Width | 0 Inches |
| Part Number | 390-013 |
| Model | 390-013 |
| Warranty | Parts |
More information #ad
5. Speedway Motors
#adSpeedway Fits Chevy Clutch Hydraulic Release Throwout Bearing Kit
#adMore information #ad
Simple installation upgrades your GM transmission to hydraulic clutch release. Built-in fail-safe retainer prevents over-extension of the hydraulic release bearing.| Brand | Speedway Motors #ad |
| Manufacturer | Speedway Motors #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 3 Pounds |
| Width | 0 Inches |
| Part Number | 91605135 |
More information #ad
6. Southwest Speed
#adNEW SOUTHWEST SPEED HYDRAULIC THROWOUT BEARING WITH CLUTCH LINE KIT,REMOTE BLEEDER HOSE KIT,COMPATIBLE WITH RACING CLUTCHES
#adSouthwest Speed #ad - Clutch line kit: 36" long, -4 an steel braided hose with one straight end and one 90 degree end | -4 AN to 1/8" NPT fitting | -4 AN to 3/8"-24 fitting with sealing washer for master cylinder | Connects hydraulic throwout bearing to master cylinder. Installs by simply removing two of the bearing retainer bolts and replacing them with the studs, which are included | Includes 2 sets of studs in 2 different sizes.Remote bleeder hose kit: allows you to bleed the throwout bearing from outside the bellhousing | 1/8" NPT male to 1/8" NPT female | 15" Long.
More information #ad
Brand new southwest speed hydraulic throwout bearing for racing clutches, #390-013, as well as a steel Braided Hose Kit to get to the Master Cylinder and a Remote Bleeder Hose Kit to allow you to bleed the bearing outside the bellhousing Part #650-600, & #650-390. Will not work with stock clutches | works with saginaw, Muncie, Quarter Master, including Ram, Tilton, GM T-10 & Jerico transmissions, as the inside diameter of this throwout bearing is 1.400" | will not fit t-5 or non-gm T-10 transmissions | Lightweight Aluminum Construction. Features: hydraulic throwout bearing: compatible with most reduced diameter racing mini-clutches, as well as any transmission that has a bearing retainer collar with an outside diameter of 1. 395" or less, etc.
| Brand | Southwest Speed #ad |
| Manufacturer | Southwest Speed #ad |
| Part Number | 650-6001 |
More information #ad
7. Southwest Speed
#adNEW RAM HYDRAULIC THROWOUT BEARING KIT FOR STOCK STYLE CLUTCHES,SET OF CONICAL SHIMS,INSTALL STUD,OUTLET,CONVERSION FITTINGS,REMOTE BLEEDER LINE,COMPATIBLE WITH GM TREMEC TRANSMISSIONS,TKO500 & TKO600
#adSouthwest Speed #ad - Brand new ram hydraulic throwout bearing Kit for Stock Style Clutches with GM Tremec Transmissions Ram Part #78131. Also, inlet, installation stud, includes a set of conical shims to properly fit the bearing, and conversion fittings, outlet, as well as a remote bleeder line.More information #ad
Includes a replacement transmission collar to install on your Tremec. Features: works with gm tremec transmissions, including TKO 500 and TKO 600 Fits stock style clutches.| Brand | Southwest Speed #ad |
| Manufacturer | Ram Clutches #ad |
| Part Number | RAM-78131 |
More information #ad
8. Speedway Motors
#adExternal Bleeder Kit, GM Hydraulic Throwout Bearing 91025610
#adSpeedway Motors #ad - These quality bleeder kits are designed for use with our GM Stock Clutch Hydraulic Throw-out Bearing 91025610 They feature all lines, adapters, and fittings needed to successfully bleed your throw-out bearing.More information #ad
New parts make installation cleaner and easier. Kit includes 1/8" npt male bleeder, -4 an male to 1/8" NPT Female adapter fitting and 12" -4 AN stainless steel straight brake line. Brake line features braided stainless covering over a Tefloninner liner.| Brand | Speedway Motors #ad |
| Manufacturer | Speedway Motors #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 1 Pounds |
| Width | 0 Inches |
| Part Number | 91025617 |
More information #ad
9. Orange Cycle Parts
#adOrange Cycle Parts Complete Throw-out Bearing Pushrod Kit Replaces OEM 37305-70 Harley 1970, E1984 Big Twin 4-Speed Models
#adOrange Cycle Parts #ad - Replaces oem 37305-70 Update with a new-style heavy-duty replacement throw-out bearing kit. Fits: harley 1970 - e1984 big Twin 4-Speed Models.More information #ad
Orange cycle parts Complete Throw-out Bearing Pushrod Kit. The kit comes complete with pushrod, release finger, thrust washers, oil slinger, rod bushing and a heavy-duty bearing.| Brand | Orange Cycle Parts #ad |
| Manufacturer | Generic #ad |
| Part Number | LN-OCP-4115-0 |
More information #ad
10. General Motors
#adGM Genuine Parts CT1078 Manual Transmission Clutch Pilot Bearing
#adGeneral Motors #ad - Offering the quality, reliability, and durability of GM OE. High quality materials ensure long service life. Manufactured to gM OE specification for fit, form, and function. Gm-recommended replacement part for your GM vehicle’s original factory component.More information #ad
| Brand | General Motors #ad |
| Manufacturer | ACDelco #ad |
| Height | 0.9 Inches |
| Length | 1.6 Inches |
| Weight | 0.1 Pounds |
| Width | 1.6 Inches |
| Part Number | CT1078 |
| Model | CT1078 |
| Warranty | 24 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details. |
More information #ad
