As an Amazon Associate I earn from qualifying purchases.
Michigan Motorsports #ad - This is the largest cam we recommend to run with stock 4L60E converter in a 4. 8/5. 3. These vortec truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available.
Specs are 212/218. 553/. 553 111. The brian tooley vortec racing truck cam Kit includes: Stage 2 Truck Cam, Beehive Springs and LS Hat Seals.
Michigan Motorsports #ad - Beehive valve springs, Set of 16 Hat Seals. With a 112 lobe separation angle LSA. These camshafts have a 3-bolt timing gear pattern. Texas speed stage 3 low lift 216/220, timing cover,. 550"/. 550" camshaft 112 lsa camshaft.
This cam gained 53. 4 hp and 22. 0 tq at the flywheel on our in-house SuperFlow 902 engine dyno using an otherwise stock 5. 3l engine! this cam uses proprietary tsp lobe profiles that are designed to utilize the factory gm ls6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market! 1400-6000 rpm power band; this is an excellent performance camshaft with a slight lope at idle! We've had tons of customers select this camshaft when looking for a cam that drives well and can be daily driven without any issues! A mail-order or dyno tune will be required for optimum performance and excellent driving quality.
These cams are designed specifically for 4. 8 5. 3 6. 0 combinations. And crank bolt & gaskets for Water Pump, & Front Seal.
Michigan Motorsports #ad - Requires a 3 bolt cam gear. Also used in 6. 0 and 6. 2 truck engines. The brian tooley vortec racing truck cam Kit includes: Stage 4 Truck Cam, Beehive Racing Springs and LS Hat Seals.
Michigan Motorsports #ad - Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance. Brian tooley racing btr stage 3 truck cam, beehive Springs and 7.
400" chromoly Pushrods 4. 8 5. 3 6. 0 . You sacrifice some low end torque in the pursuit of more power higher in the RPM range, Yukon, just not ideal for the everyday hauler. Stage iii camshaft specs specs: 218/224.
400 chromoly Pushrods. Stage 3 specifics: the stage 3 v2 camshaft is an amazing all around grind for the truck enthusiast. An aftermarket converter is highly recommended with this grind. Excellent for 4. 8 5. 3 6. 0 6. 2 silverado, suburban, sierra, tahoe, it is still a tow-friendly camshaft, but gain an idle note that is distinctly BTR! Stage 3 grind, Escalade.
Michigan Motorsports #ad - These vortec truck cams require a 3-bolt timing gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available.
The brian tooley racing truck cam kit includes: Stage 3 Truck Cam, Beehive Racing Springs and Set of VS LS Hat Seals. The stage iii cam has a noticeable cam sound that so many are looking for.
Michigan Motorsports #ad - Brian tooley turbo ls stage 3 camshaft, btr Platinum dual springs with Lightweight Titanium Retainers, and 7. 400 chromoly Pushrods. If you have a light car wanting to push the limits, then this is the go to cam for your 5.
3/6. 0 s400 equipped combination. When you need a little more rpm than the stage 2 can give you. Springs: btr platinum dual spring kit for ls engines using stock rocker arms.
Michigan Motorsports #ad - Tuning will also be required in both automatic & manual applications. With the ms3 camshaft, the automatic-equipped customer must have at least a 3800+ stall speed converter.
Includes tsp. 660" dual spring kit w/ pac racing polished springs, timing cover, new valve Stem Seals, 7.400 chromoly pushrods, crank bolt & gaskets for Water Pump, Hardened Spring Seats, Titanium Retainers, & Front Seal.
Michigan Motorsports #ad - The end result is a revised camshaft that provides more average torque, higher peak power, and a maximum depth heat treatment. The stage 2 grind is a great middle-ground for people looking for added power, while keeping OEM driving characteristics in check.
Brian tooley 2 btr stage 2 truck cam v2 212/218. 553"/. 553" 111 99-13 gm truck applications Beehive Springs and Cam Install Gasket Kit. These camshafts have a 3-bolt from toy haulers to trucks turned street rods, Timing Cover, Beehive Springs, Crank Bolt, Seals, Gaskets for Water Pump, our V2 truck cam lineup has an answer for your needs.
As opposed to grinding all the camshafts from the same starting core, they each have their own respective core to begin. From toy haulers to trucks turned street rods, our v2 truck cam lineup has an answer for your needs. Oem torque converters play happily with these grinds. If you need to hook up to a trailer and hit the road for the weekend, this grind will give you more average torque than the previous iteration of the truck series.
Michigan Motorsports #ad - Highly recommended when upgrading Camshafts. Cam specs are 234/239. 612"/. 610" 115+5 and comes a 3 bolt timing gear pattern. Pushrod specs are: 7. 400" long 5/16 chromoly. 080 wall pushrods by Brian Tooley Racing. Brian tooley camshaft, btr platinum Dual Springs with Lightweight Titanium Retainers, and 7.
Comp Cams #ad - Developed and tested on the dyno - Adds 89 Horsepower when used with properly matched CK and MK kit components. Fit type: Vehicle Specific. High rpm potential - lst camshafts accel in the 6, 300 RPM range, 700 to 7, allowing engines not only to turn more RPM, but also to make more power in this range.
1. Michigan Motorsports
#adBrian Tooley Racing BTR Vortec Truck Stage 2 Cam and Spring Kit 4.8 5.3 6.0 Includes Beehive Springs and Valve Seals
#adSpecs are 212/218. 553/. 553 111. The brian tooley vortec racing truck cam Kit includes: Stage 2 Truck Cam, Beehive Springs and LS Hat Seals.
More information #ad
Brian tooley racing btr truck stage 2 camshaft Kit 4. 8 5. 3 6. 0 camshaft and Beehive Springs and Valve Seals. The stage ii cam has more of a noticable idle, with even more average torque production than the Stage I cam, at the sacrifice of some low end torque and fuel mileage.| Brand | Michigan Motorsports #ad |
| Manufacturer | Michigan Motorsports #ad |
| Part Number | BTR TRUCK CAM KIT stage 2 |
More information #ad
2. Michigan Motorsports
#adTexas Speed TSP Stage 3 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0,Includes GM LS6 Single Beehive Valve Springs, Set of 16 and Gasket Set Kit Camshaft, Springs and Gasket Kit
#adThis cam gained 53. 4 hp and 22. 0 tq at the flywheel on our in-house SuperFlow 902 engine dyno using an otherwise stock 5. 3l engine! this cam uses proprietary tsp lobe profiles that are designed to utilize the factory gm ls6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market! 1400-6000 rpm power band; this is an excellent performance camshaft with a slight lope at idle! We've had tons of customers select this camshaft when looking for a cam that drives well and can be daily driven without any issues! A mail-order or dyno tune will be required for optimum performance and excellent driving quality.
More information #ad
These cams are designed specifically for 4. 8 5. 3 6. 0 combinations. And crank bolt & gaskets for Water Pump, & Front Seal.
| Brand | Michigan Motorsports #ad |
| Manufacturer | Texas Speed #ad |
| Part Number | TSP 25-TSPLL216220 |
More information #ad
3. Michigan Motorsports
#adBrian Tooley Racing BTR Vortec Truck Stage 4 Cam and Beehive Racing Springs 4.8 5.3 6.0
#adMore information #ad
Requires around a 3000-3200 converter. Specs are 224/230553"/. 553" 109. Brian tooley racing btr truck stage 4 cam kit 4. 8 5. 3 6. 0 cam and beehive Springs and Valve Seals.| Brand | Michigan Motorsports #ad |
| Manufacturer | Michigan Motorsports #ad |
| Height | 50 Centimeters |
| Length | 100 Centimeters |
| Weight | 100 Kilograms |
| Width | 100 Centimeters |
| Part Number | BTR TRUCK CAM KIT stage 4 |
More information #ad
4. Michigan Motorsports
#adBrian Tooley Racing BTR Truck Stage 3 Cam Beehive Springs and Pushrod Kit Fits Silverado Sierra Vortec 4.8 5.3 6.0 6.2
#ad400" chromoly Pushrods 4. 8 5. 3 6. 0 . You sacrifice some low end torque in the pursuit of more power higher in the RPM range, Yukon, just not ideal for the everyday hauler. Stage iii camshaft specs specs: 218/224.
More information #ad
553/. 553 110+0 requires a 3 bolt timing gear. The brian tooley vortec racing truck cam kit includes: stage 3 Truck Cam, Beehive Springs, Set of VS LS Hat Seals, 7.4400 chromoly Pushrods. Stage 3 specifics: the stage 3 v2 camshaft is an amazing all around grind for the truck enthusiast. An aftermarket converter is highly recommended with this grind. Excellent for 4. 8 5. 3 6. 0 6. 2 silverado, suburban, sierra, tahoe, it is still a tow-friendly camshaft, but gain an idle note that is distinctly BTR! Stage 3 grind, Escalade.
| Brand | Michigan Motorsports #ad |
| Manufacturer | Michigan Motorsports #ad |
| Part Number | A7500+A6400+A6500+72400 |
More information #ad
5. Michigan Motorsports
#adBrian Tooley Racing BTR Truck Stage 3 Cam and Beehive Spring Kit 4.8 5.3 6.0 Fits Silverado Sierra Vortec
#adThe brian tooley racing truck cam kit includes: Stage 3 Truck Cam, Beehive Racing Springs and Set of VS LS Hat Seals. The stage iii cam has a noticeable cam sound that so many are looking for.
More information #ad
Specs are 218/224. 553/. 553 110+0 Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance. It will make even more average torque than the Stage II cam, at the sacrifice of some low end torque and fuel mileage. Brian tooley racing btr truck stage 3 cam kit 4. 8 5. 3 6. 0 camshaft, beehive Springs and LS Valve Seals.| Brand | Michigan Motorsports #ad |
| Manufacturer | michigan Motorsports #ad |
| Part Number | BTR TRUCK CAM KIT stage 3 |
More information #ad
6. Michigan Motorsports
#adSpring Kit with Titanium Retainers and Chromoly Pushrods LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2, Brian Tooley Racing BTR Turbo LS Stage 3 Cam
#ad3/6. 0 s400 equipped combination. When you need a little more rpm than the stage 2 can give you. Springs: btr platinum dual spring kit for ls engines using stock rocker arms.
More information #ad
Highly recommended when upgrading Camshafts. Includes dual polished springs, matching lightweight Titanium Retainers faster reving than steel, Locators for stock guides, locks and seals. Cam specs are: 230/235. 609"/. 610" 114+4 and comes a 3 bolt timing gear pattern. Pushrods: 7. 400" long 5/16 chromoly. 080 wall pushrods by Brian Tooley Racing.| Brand | Michigan Motorsports #ad |
| Manufacturer | Michigan Motorsports #ad |
| Part Number | BTR 33035144 +SK001/T/0560/BB +PR7400312 |
More information #ad
7. Michigan Motorsports
#adChromoly Pushrods, Texas Speed TSP Magic Stick Stage 4 Cam, Spring Kit, Gaskets: 239/242.649"/.600", 111.5 LSA, Spring Kit, 110 ICL Camshaft 4.8 5.3 5.7 6.0 6.2 Camshaft, and Gasket Set
#adIncludes tsp. 660" dual spring kit w/ pac racing polished springs, timing cover, new valve Stem Seals, 7.400 chromoly pushrods, crank bolt & gaskets for Water Pump, Hardened Spring Seats, Titanium Retainers, & Front Seal.
More information #ad
Texas speed tsp magic stick stage 4 cam, 111. 5 lsa,. 649"/. 600", specs: 239/242, 110 icl 3-Bolt Camshaft 4. 8 5. 3 5. 7 6. 0 6. 2. The magic stick camshafts are designed to be a all out max effort camshaft for people looking to get maximum power from stock displacement engines. The magic stick camshafts require a high quality double spring kit such as the PAC. 660" double spring kits.| Brand | Michigan Motorsports #ad |
| Manufacturer | Texas Speed #ad |
| Part Number | 25-TSPMS4 |
More information #ad
8. Michigan Motorsports
#adVortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 Camshaft, Brian Tooley BTR Stage 2 Truck Camshaft Springs, Spring Set and Gasket Kit
#adBrian tooley 2 btr stage 2 truck cam v2 212/218. 553"/. 553" 111 99-13 gm truck applications Beehive Springs and Cam Install Gasket Kit. These camshafts have a 3-bolt from toy haulers to trucks turned street rods, Timing Cover, Beehive Springs, Crank Bolt, Seals, Gaskets for Water Pump, our V2 truck cam lineup has an answer for your needs.
More information #ad
Camshaft, & front seal. The maximum heat treat depth is achieved by having cam cores made within a few thousandths of final grind size. We have partnered with an OEM Tier 1 supplier to grind the new V2 series. As opposed to grinding all the camshafts from the same starting core, they each have their own respective core to begin. From toy haulers to trucks turned street rods, our v2 truck cam lineup has an answer for your needs. Oem torque converters play happily with these grinds. If you need to hook up to a trailer and hit the road for the weekend, this grind will give you more average torque than the previous iteration of the truck series.
| Brand | Michigan Motorsports #ad |
| Manufacturer | Brian Tooley #ad |
| Height | 50 Centimeters |
| Length | 100 Centimeters |
| Width | 100 Centimeters |
| Part Number | BTR 31218110 |
More information #ad
9. Michigan Motorsports
#adSpring Kit with Titanium Retainers and Chromoly Pushrods LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2, Brian Tooley Racing BTR Turbo LS Stage 4 Cam
#adMore information #ad
400 chromoly Pushrods. The big stick of the turbo cams!! Springs: btr platinum dual spring kit for ls engines using stock rocker arms. Includes dual polished springs, matching lightweight Titanium Retainers faster reving than steel, Locators for stock guides, locks and seals.| Brand | Michigan Motorsports #ad |
| Manufacturer | Michigan Motorsports #ad |
| Part Number | BTR 33439155 +CK/T001/7400312/TBO4 |
More information #ad
10. Comp Cams
#adCamshaft only, Comp Cams 54-703-11 Stage 2 Thumpr Cam for GEN IV LS 4.8/5.3/6.0L Trucks
#adMore information #ad
No guesswork - properly matched components in CK and MK kits completely remove any guesswork in selecting the rest of the valve train.| Brand | Comp Cams #ad |
| Manufacturer | COMP Cams #ad |
| Height | 2.6 Inches |
| Length | 23.31 Inches |
| Weight | 10 Pounds |
| Width | 2.91 Inches |
| Part Number | 54-703-11 |
| Model | 54-703-11 |
| Warranty | 1 Year Limited |
More information #ad
