As an Amazon Associate I earn from qualifying purchases.

1. Ronin Factory

#ad

RONIN FACTORY, Easy Oil Drain for 2015+ Ford F150, Ford Raptor & Ford Mustang

#adRonin Factory #ad - Clean - with the built in valve, you can safely and slowly drain the oil in a controlled manner. Installs in a matter of seconds. New - patent pending design makes changing your new ford car or trucks engine oil even easier. The ronin factory drain requires no maintenance, so the overall cost over the life of the truck will be less expensive with the Ronin Factory Easy Oil Drain.

Easy - no installation tools are required & no permanent modifications required. Please make sure to check that your vehicle has the OEM plastic drain plug before ordering as some models do not use this new style of drain plug. No more big messes of oil on the ground or running down your truck frame. For 2015+ ford f150 xlt, f150 king ranch, f150 raptor, f150 lariat, F150 Platinum & Limited as well as Ford Mustangs.

Replace the oem plastic Yellow Drain Plug with our Billet Aluminum Easy Drain Plug assembly. Save - the oem ford yellow plastic plug requires replacing the o-ring each oil drain. Protection - magnetic end of the plug will trap and hold onto any metal particals in the oil, keeping them away from bearings, which can prolong engine life, especially for new vehicles.

Brand	Ronin Factory #ad
Manufacturer	Ronin Factory #ad
Part Number	758381842008

2. UPR Products

#ad

Billet Oil Pan Drain Plug with Drain Valve

#adUPR Products #ad - Safeguarding - magnetic tip at the end of the plug to catch and hold any metal debris in the oil, protecting the bearings from premature wear or scarring, critical for new vehicle break-in. Economical - upr drain valve does not require the o-ring to be replaced with each oil drain as the Faulty OEM Plastic Yellow Drain Plug that fits the Mustang, F150 and many other Ford and Lincoln Vehicles.

Clean - new built in valve allows you to drain your oil in a controlled manner. Simple - no tools or modifications required for the easiest installation in seconds. This upr drain plug is intended to replace all the Faulty OEM Plastic Yellow Drain Plugs.

Replacing that oeM Plastic Yellow Drain Plug before it fails. New - design makes changing your oil a breeze and dreading it a thing of the past. Fits all ford vehicles with the Faulty OEM Plastic Yellow Drain Plug. No more mess from abrupt oil splashes or oil runoff down your frame or skid plate.

Brand	UPR Products #ad
Manufacturer	UPR Products #ad
Part Number	3025-02

3. AIB2C

#ad

3 PCS KX6Z6730B KX6Z-6730B Oil Drain Plug replacement for Ford F-150 2015-2018 Lincoln MKZ

#adAIB2C #ad - High corrosion resistance and a long service life. This is new model, has some different with the old one FT4Z-6730-A, please check the picture before you place order. Aftermarket oil drain Plug Direct Fit Your Ford Vehicle. Good tightness, prevent from Oil Leakage Problem. Premium plastic Materail to ensure High Performance.

Brand	AIB2C #ad
Manufacturer	AIB2C #ad
Part Number	FT4Z-6730-A BC3Z-6730-A

4. UPR Products

#ad

Billet Oil Drain Plug Mustang GT F150 5.0 3.5 2.7

#adUPR Products #ad - New built-in Magnet on end of drain plug. Replaces the factory plastic drain plug on plastic oil pans. Cnc machined Billet Aluminum Construction. A simple twist-In Installation. New double o-ring design Eliminates Sloppy OEM Fit.

Brand	UPR Products #ad
Manufacturer	UPR Products #ad
Part Number	3025-01
Model	3025-01

5. Ford

#ad

Ford BC3Z-6730-A / FT4Z-6730-A Engine Oil Drain Plug

#adFord #ad - Genuine OEM product. Package dimensions: 1. 27 l x 12. 446 h x 3. 302 w centimeters. Package weight: 0017 kilograms. Fit type: Vehicle Specific.

Brand	Ford #ad
Manufacturer	Ford #ad
Height	4 Inches
Length	6 Inches
Width	4 Inches
Part Number	FT4Z-6730-A
Model	FT4Z-6730-A
Warranty	Ford Limited Warranty

6. Ketofa

#ad

KX6Z6730B Oil Drain Plug Compatible with Ford F-150 2015-2018 Lincoln MKZ Mustang Expedition Engine, New KX6Z-6730B Replaces for FT4Z-6730-A Plug

#adKetofa #ad - Part number--kx6z6730bkx6z-6730-b compatible with Fo-rd Part Number FT4Z-6730-A. Easy to install--oil drain plug direct Fits for your Fo-rd Vehicle, just replaces your old, cracked, or broken engine oil drain plug.

High quality--premium abs Plastic Material to ensure High Performance, reasonable structure. Function--good tightness, prevent from Oil Leakage Problem and Effectively solve the oil spill. Note--this is new model, it has some different with the old one FT4Z-6730-A. Non original aftermarket part!! This is a compatible spare part，part number and other manufacturers' name are just for reference.

Brand	Ketofa #ad
Manufacturer	KX6Z6730B #ad
Part Number	KX6Z6730B

7. ValvoMax

#ad

No Mess, Fast Drain, for M12-1.75, No Tools, Stainless Drain Hose Attachment, ValvoMax Stainless Oil Drain Valve

#adValvoMax #ad - Get back to doing what matters most. Oil drains through the attached tube into your container! A simple twist of the wrist begins oil flowing. Quit searching for that misplaced socket or ratchet. Nothing comes close to the durability offered.

Drain oil in 10 minutes or less with the Quick Twist Oil Valve from ValvoMax. Material you can TRUST! Wave spring technology. 100% stainless construction. Drain oil HOT for faster changes. Prevent spills, eliminate injuries, promote sustainability, controlled sampling, lower cost, reduce time, and more! ValvoMax is the FUTURE of oil changes!. Drain oil with ease. One-time installation. No more mopping up messes. Eliminate stripped oil pans. Constructed of rock solid 304 stainless steel, the valve is sure to outlast any vehicle.

Follow an easy 3-step process: remove cap, insert drain tool, watch the oil drain! It's so easy, NO MESS, anyone could do it. Includes a steel cap with a rubber seal inside for added protection against leaks. By using a proprietary wave spring, the oil is able to travel quickly! Use a ValvoMax Drain Bag sold separately for added convenience of disposal. Save time with fast oil changes.

Brand	ValvoMax #ad
Manufacturer	ValvoMax #ad
Part Number	Oil Drain Valve M12-1.75

8. OIL UDDER

#ad

OIL UDDER XL W/Drain Kit | 3 in 1 Spill Free Oil Change Tool | Mess Free Oil Filter Tool/Wrench | Magnetic Drain Plug Catch/Splash Guard | Flexible Funnel | Filters up to 4" Diameter

#adOIL UDDER #ad - A oil filter wrench can be used over the OIL UDDER for filters installed too tight. Flexible and durable nitrile rubber construction offers supreme grip on filter.

Filters up to 4" in Diameter. Drain kit version: red combo plug and Black Flexible Tube Included. Use the oil udder to direct the flow of oil and eliminate splashes. Flexible funnel for your used oil. Magnetic drain plug catch/splash guard. Magnetic oil filter removal tool. Catches oil and keeps your hands clean and burn free. Magnet catches plug so it doesn't block oil flow. Magnetically attaches to oil filter for secure operation.

Brand	OIL UDDER #ad
Manufacturer	OIL UDDER #ad
Height	4 Inches
Length	7 Inches
Width	4 Inches
Part Number	OU-1005

9. OIL UDDER

#ad

OIL UDDER W/Drain Kit | 3 in 1 Spill Free Oil Change Tool | Mess Free Oil Filter Tool/Wrench | Magnetic Drain Plug Catch/Splash Guard | Flexible Funnel | Filters up to 3" Diameter

#adOIL UDDER #ad - Magnet catches plug so it doesn't block oil flow. Flexible and durable nitrile rubber construction offers supreme grip on filter. Catches oil and keeps your hands clean and burn free.

Flexible funnel for your used oil. Oil udder xl available soon for larger filters. Magnetically attaches to oil filter for secure operation. Use the oil udder to direct the flow of oil and eliminate splashes. Filters up to 3" in Diameter. Magnetic oil filter removal tool. Magnetic drain plug catch/splash guard. An oil filter wrench can be used over the OIL UDDER for filters installed too tight. Drain kit version: red combo plug and black flexible Tube Included.

Brand	OIL UDDER #ad
Manufacturer	OIL UDDER #ad
Part Number	OU-1002

10. Mission Automotive

#ad

Fits Civic, Pilot, CR-V/CRV, Odyssey and More, 20-Pack of Oil Crush Washers/Drain Plug Gaskets compatible with Honda, compatible with OEM 94109-14000, By Mission Automotive, Accord

#adMission Automotive #ad - Does not fit 2011+, civic si, passport, element, Pilot, Prelude, Ridgeline, S2000 and many motorcycle models. Wide compatibility: these washers are compatible with most honda models, fit hybrid, fit, accord Crosstour, civic, Insight Hybrid, crosstour, including Accord, civic gx, accord hybrid, Civic Hybrid, CR-X, hr-v, FCX Clarity, Odyssey, Del Sol, Insight, cr-z, cr-z hybrid, CR-V only pre-2011.

Strict quality standards: our washers are designed and constructed to strict quality standards and made from high quality materials, ensuring proper fit with the drain plug and creating a tight seal. We have no affiliation with or endorsement from any of the other manufacturers mentioned. Perfect replacement: mission automotive oil crush washers / drain plug gaskets are a compatible replacement for your Honda OEM washer / gasket.

Ideal for oil changes and oil filter replacements. Our washers meet or exceed the quality of OEM gaskets based on in-house testing. Value pack of 20: don't spend more than you have to on overpriced OEM parts - our value pack of 20 is an excellent value whether you’re a professional mechanic or simply someone who likes to do it yourself! Please note: this product is produced by mission automotive Parts.

Brand	Mission Automotive #ad
Manufacturer	Mission Automotive #ad
Height	0.1 Inches
Length	2 Inches
Width	2 Inches
Part Number	MA777
Model	MA777