Top 10 Pod Light Brackets – Electronics Features

As an Amazon Associate I earn from qualifying purchases.

1. Nilight

#ad

Led Light Bar Mounting Brackets Nilight 2pcs Universal Hood Led Work Light led Pods Mount Bracket Clamp Holder for SUV Truck Off Road Installed No Need Drilling, 2 Years Warranty

#ad
Nilight #ad - Easy to install. Universal: it can be used to install almost all LED Light Pods. Anti-slip surface: the surface contacting with the front cover of the car covers a multi-layer non-slip composite material and loss prevention materials to ensure that the contact surface of the bracket will not damage the car surface paint. Made of 304 stainless steel, can ensure absolute anti-rust, the surface covered with rubber anti-rust paint, anti-corrosion. No any damage to the car surface paint. Stable & durable: five Screws are enough to tight the light with the car cover tightly.
BrandNilight #ad
ManufacturerNilight #ad
Weight0.22 Pounds
Part Number90025B
Model90025B
Warranty2 Years Warranty

2. Spurtar

#ad

A-Pillar LED Work Light Mounting Brackets for Off-Road LED Cube Pods Light Side Pillar Mounting Brackets Fit UTV 2014-2019 Polaris RZR XP 900 1000

#ad
Spurtar #ad - No modification or drilling required, installs by using original bolts, firmly holds spot lights in place. Package includes: 1 pair of A-pillar mount brackets Does not come with LED work lights & hardware. Work light compatible: compatible 12w/18w/20w/27w/45W/48W LED work light, 3''-4'' LED work lights. Fitment: 2014-2019 polaris rzr xp 1000; 2015-2019 polaris rzR 900 . Easy installation: easy mounting. Good material: full steel metal construction that help stability and strength when mounted, high quality power coat that resists rust and dirt.
BrandSpurtar #ad
ManufacturerSpurtar #ad
Height2.56 Inches
Length6.1 Inches
Width3.35 Inches
Part NumberAEX0059

3. Nilight

#ad

Nilight 2 Pack Mounting Bracket Kit LED Off Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty

#ad
Nilight #ad - Sturdy bracket: strong aluminium alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving. Useful rubber: high quality rubber inserts dampen driving vibration and avoid scraping bull bar surface. Wide application: can be used on tubes of 1", 1-1/2", 1-3/4" & 2" In diameter and applied to LED light bar for almost all kinds of vehicle. Easy installation: pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation. Package includes: 2Pcs LED light bar mounting bracket.
BrandNilight #ad
ManufacturerNilight #ad
Height2 Inches
Length3 Inches
Weight0.9 Pounds
Width3 Inches
Part Number90020B
Model90020B
Warranty2 years Warranty

4. Nilight

#ad

Nilight, 90026B 2PCS Jeep JK A-Pillar Windshield Hinge Mounting Brackets for Offroad LED Fog Light Halogen Work Light for 2007-2017 Jeep Wrangler JK,2 years Warranty

#ad
Nilight #ad - Free of drilling: no drilling required. Applicable vehicles: 2007-2017 jeep wrangler JK, the mounting plate contour will perfectly match that of the Jeep JK’s panel contour.

Package include: 2 pieces jeep JK A-Pillar windshield mounting brackets. Ample room for mounting: length of the mounting plate of the bracket provides ample room for you to mount oversized lights, maximum thickness of the light can be 3. Also ensure a firmer mounting. Excellent protection: padded backplate between the contact area of the jeep and mounting bracket, preventing your jeep from being worn down. Just find your jeep’s factory holes and stock bolts, and then mount the brackets on and lock. Mounting bolts are not included. 7”.
BrandNilight #ad
ManufacturerNilight #ad
Part Number90026B
Model90026B
Warranty2 Years Warranty

5. GS Power

#ad

GS Power Engine Hood Hinge Ditch LED Mount Brackets for Auxiliary Offroad Pod Work Light. Fit Cowl Panel at Windshield Base Compatible with 2005-2015 Toyota Tacoma

#ad
GS Power #ad - Sold as a pair driver & passenger side. For 3rd gen 2016-present Tacoma Brackets, Visit www. Amazon. Com/gspower. Requires only a wrench or socket for installation. May be used for CB Antenna or Whip Flag. Compatible with all 2005 - 2015 Toyota Tacoma. No drilling needed.
BrandGS Power #ad
ManufacturerGS Power #ad
Part NumberTCEH0515

6. Nilight

#ad

Nilight 2PCS Mounting Base Bracket LED Light Bar Slide Mount Bracket 2 years Warranty 90034B

#ad
Nilight #ad - Fit type: Universal Fit. The sturdy bracket can firmly fix the light bar. Sliding black block: no need drilling, if there is a mounting hole before, the sliding block can slide left and right to fit the existing holes.

Easy to use: works with led light bar, directly mount onto your bull bar, side mount screws and bolts, car top racks, grille guard, etc. Fitment: apply to most slide mounted led light bars: 18w, 126W, 36W, 108w, 252W, 198w, 162W, 234W, 72W, etc. Quakeproof when passing through rugged terrain. High quality: it is made of strong and lightweight aluminum alloy material. Adjustable bracket:the pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier.
BrandNilight #ad
ManufacturerNilight #ad
Part Number90034B
Model90034B
Warranty2 years Warranty

7. Nilight

#ad

Nilight 90042B 2PCS Magnetic Base LED Light Bar Mounting Brackets, 2 Years Warranty, Powerful Sucker Holder for Bottom-Mounted Offroad LED Work Light Mounting on Hood

#ad
Nilight #ad - For detailed mounting tips, mount the light on the bracket, just do flattest, please the 7th picture on the left. Multiple mounting functions: you can use a single magnetic base separately to mount small led work light, or use two or three together to mount a longer bottom-mounted LED light bar.

Once matching well with the flat surface, it is strongly held even on emergency braking or driving on the rugged mountain road. Easier mounting: no drilling needed, and then mount the whole kit on the mounting position. Package include: 2 x magnetic mounting base. Strong hold: each magnetic base comes with 12 PCS magnets. Anti-scratch: the magnetic bases are coated with rubber cover to protect from scratching the hood and add on a secure installation.
BrandNilight #ad
ManufacturerNilight #ad
Height1.14 Inches
Length4.53 Inches
Weight0.62 Pounds
Width4.06 Inches
Part Number90042B
Model90042B
Warranty2 Years Warranty

8. LAMPHUS

#ad

Off-Road ATV UTV Light Bar Mounts Mounting Bracket Bar Clamp Kits 1"/1.5"/1.75"/2" Inch Horizontal Bar Aluminium 2 Units Bull Bar UTV Roll Bar Clamp Tube Roll Cage Clamps Mount For ATV UTV

#ad
LAMPHUS #ad - Cast aluminum construction- precision-welded from cast aluminum, our clamps are strong & built to last. Almost endless applications- can be used on tubes measuring 1", 1. 75" & 2" in diameter; perfect for off-road vehicles, trucks, UTVs, ATVs, boats, 1.

5", farm vehicles & more. Rubber inserts dampen & protect- rubber inserts for snugger fitment with a wider range of sizes; help dampen vibrations during off-roading and protect your bull bar from being scraped. Add more lights, roll cage, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, bull bar, or headache rack.

Comes fully-loaded- includes everything you need to start mounting your favorite LED light bars to your ride, including an Allen Hex Key.
BrandLAMPHUS #ad
ManufacturerLAMPHUS #ad
Height1.25 Inches
Length6.75 Inches
Weight1.25 Pounds
Width6.25 Inches
Part NumberCRLBXXA3-X2
Model8542124607

9. WSays

#ad

WSays Side Pillar Mounting Brackets Custom Compatible with Offroad LED Cube Pods Light Fit UTV Polaris RZR XP 900 1000

#ad
WSays #ad - Fitments:2014-2020 polaris rzr xp 1000; 2015-2020 polaris rZR 900 Package include: 1 pair a-pillar Bracket Mounts Does not come with LED work lights & hardware. Anti-corrosion material: Black powder coating, precision laser cut steel, waterproof and rust-resisting, long service life. Perfectly compatible: it compatible with 12w/18w/20w/27W/45W/48W LED pod, 3''-4'' LED Work Lights. Easy install: no modification or drilling required, Provided installation bracket ensures secure fixed of the LED light to your vehicle.
BrandWSays #ad
ManufacturerWSays #ad
Part Number793565281044

10. SAMLIGHT

#ad

Chelhead Led Light Bar Mounting Brackets, 2PCS Stainless Steel Universal Pillar Hood led Work Light bar Mount Brackets Clamp Holder for Jeep Truck SUV Truck Sedan Hatchback Wagon Without Drilling

#ad
SAMLIGHT #ad - 304 stainless steel: the mount brackets are made of 304 stainless steel and the surface covered with rubber anti-rust paint, can ensure absolute anti-rust, anti-corrosion. Anti-slip design: the surface contacting with the front cover of the car covers a multi-layer non-slip composite material and loss prevention materials to ensure that the contact surface of the bracket will not damage the car surface paint.

Their high quality guarantees that they can be used in bad weather conditions including rainy days and storms. Wide application: this damage-free mounting bracket can be used for all car hoods, LED work lights, LED light bar, Can mount any off-road lights, not for ATV and UTV, etc.

Package & warranty: 2 x stainless steel brackets, 3 x Allen wrench Not including lights. No-drilling and stable design: the brackets are installed without drilling, 5pcs Screws whose Dia is 01inch are enough to tight the light with the car cover tightly.
BrandSAMLIGHT #ad
ManufacturerSAMLIGHT #ad
Weight0.4 Pounds
Part NumberSAM-62