Top 10 Lgp6-200-10 – Automotive Replacement Shock Lift Supports

As an Amazon Associate I earn from qualifying purchases.

1. RV Designer

#ad

Gas Prop Door Support, RV Designer G21, 20 inch, 10 lb. Load Capacity, Exterior Hardware

#ad
RV Designer #ad - 20 inch extended length, 10 lbs force. If there are 2 props, replace them both to keep door feet balanced. Replace your gas prop by matching its length and force as close as possible. One gas prop per package.
BrandRV Designer #ad
ManufacturerRV Designer #ad
Height0.5 Inches
Length23 Inches
Weight0.4 Pounds
Width2 Inches
Part NumberG21
ModelG21
WarrantyContact Manufacturer

2. Red Hound Auto

#ad

20 Inch 10 lbs Gas Prop Lift Spring Rod Strut Heavy Duty Tool Box Lid Top RV Compatible with 10mm Ball Mounts

#ad
Red Hound Auto #ad - Compatible with 10mm ball mounts; note: verify strength needed for your application; DO NOT attempt to compress by hand, doing so can damage the struts. Stroke length: 8 inches. Open length: 20 inches; compressed 12 inches. Rod diameter: 6mm || Force: 10 lbs. Red hound auto single Gas Charged Lift Support.
BrandRed Hound Auto #ad
ManufacturerRed Hound Auto #ad
Height1 Inches
Length22 Inches
Weight0.39 Pounds
Width1 Inches
Part NumberRED820008
Warranty1 year Limited

3. uxcell

#ad

Uxcell Gas Spring End Fitting Black Connector M6 Female Thread PA66A5 5pcs

#ad
uxcell #ad - Gas spring strut Joint connector End Fitting. It is a good replacement of gas springs ball strut, holding, and the gas springs are ideal motion control devices for lifting, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies. Made of pa66A5. Female thread dia. M6 / 024". Package content: 5Pcs x Gas Spring End Fitting.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera18030900ux0049
Modela18030900ux0049

4. Beneges

#ad

Beneges 2PCs Universal Gas Charged Lift Supports Spring Struts Shocks Dampers Force 18 Lbs/80 N Per Prop, Extended Length 10 inches, Force Per Set 36 Lbs/160 N

#ad
Beneges #ad - Premium manufacturer- beneges is qualified manufacturer with SGS approved. All our lift supports meet ISO/TS16949 standard and OEM specifications. All our products are ONE year FREE change.

End fitting: ball Socket U Band Nylon=102mm=13/32"=. 402". Kind note- please read description and compatibility chart before purchase and freely contact with our customer service if any question. Each strut Force 18Lbs, ext. Ser. Num 80N. Advanced process- the rods are straightly aligned, round grinded, and then galvanized, polished. The cylinder tubes are cold rolled and painted with epoxy paint. Multiple processing prolongs lift struts life. Related parameters- extended length: 9. 76 in, compressed length: 6. 18 in. Fit vehicles- universal, atv vehicles, like Automotive, truck, Household cabinets, Marine, industrial, RV Vehicles and many other applications.
BrandBeneges #ad
ManufacturerBeneges Auto Part #ad
Part NumberBEN56003347

5. Red Hound Auto

#ad

2 20 Inch 20 lbs Gas Prop Lift Springs Rod Struts Heavy Duty Tool Box Lid Top RV Pair

#ad
Red Hound Auto #ad - Rod diameter: 6mm || force: 20 lbs; Note: verify strength needed for your application as it can vary great. Compatible with 10mm ball mounts; DO NOT attempt to compress by hand, doing so can damage the struts. Open length: 20 inches; compressed 12 inches. Red hound auto gas Charged Lift Supports Pair. Stroke length: 8 inches.
BrandRed Hound Auto #ad
ManufacturerRed Hound Auto #ad
Height5 Inches
Length25 Inches
Width8 Inches
Part NumberRED829009
Warranty1 year Limited

6. Red Hound Auto

#ad

2 20 Inch 80 lbs Gas Prop Lift Springs Rod Struts Heavy Duty Tool Box Lid Top RV Pair

#ad
Red Hound Auto #ad - Compatible with 10mm ball mounts; note: verify strength needed for your application; DO NOT attempt to compress by hand, doing so can damage the struts. Rod diameter: 6mm || Force: 80 lbs. Stroke length: 8 inches. Red hound auto gas Charged Lift Supports Pair. Open length: 20 inches; compressed 12 inches.
BrandRed Hound Auto #ad
ManufacturerRed Hound Auto #ad
Height5 Inches
Length25 Inches
Width8 Inches
Part NumberRED829013
Warranty1 year Limited

7. Red Hound Auto

#ad

2 20 Inch 60 lbs Gas Prop Lift Springs Rod Struts Heavy Duty Tool Box Lid Top RV Pair

#ad
Red Hound Auto #ad - Rod diameter: 6 mm || Force: 60 lbs. Compatible with 10mm ball mounts; note: verify strength needed for your application; DO NOT attempt to compress by hand, doing so can damage the struts. Open length: 20 inches; compressed 12 inches. Stroke length: 8 inches. Red hound auto gas Charged Lift Supports Pair.
BrandRed Hound Auto #ad
ManufacturerRed Hound Auto #ad
Height5 Inches
Length24 Inches
Width8 Inches
Part NumberRED829012
Warranty1 year Limited

8. ARANA

#ad

C16-08316 C1608316 20" 40 Lbs Gas Struts Prop Shock 20 inch for Camper Shell Rear Window Tonneau Cover RV Side Door, 2Pcs ARANA

#ad
ARANA #ad - 20 inch 40 pound gas struts -- suitable to use on leer camper shell window, truck cap, rv side door, etc. ;. 20" 40 lb gas shocks -- most suitable support weight is 30-45 pounds; if you want to use these struts on other custom-built lids, broken ball connectors or unfit problem, DO message us and let us send a new set with proper pressure! 18-month support -- if you unluckily encounter with missing parts, please measure the lid weight and ensure they are between 30 pounds and 45 pounds; If you find the pressure not fit after installing, just click "Ask Seller" besides your order from us for immediate assistance! .

220 inch truck cap lid lift supports -- interchange part number -- compatible with the following oem numbers:C1608316, C16-22180, C16-21705, C16-08316, C1622180, C1621705, SG327005.2

20" camper shell window struts -- 2 struts each package, force: 40 pounds per strut, extended Length Center-to-Center: 19. 69 in 500mm, suitable support weight is from 32 pounds to 45 pounds for 2 STRUTS; End Fiting: 10mm Ball Stud Sockets.
BrandARANA #ad
ManufacturerArana #ad
Part Numberara_290a

9. Strong Arm

#ad

Qty 2 StrongArm 4060 Universal 10" 60lb 10mm Ball Socket Lift Supports

#ad
Strong Arm #ad - Strong arm supports use standards of high quality you can trust and use with confidence, they install easily in minutes, often times without special tools required. Compatible with the following oem numbers:012172, 4541bi, sl-3060, 500060, sl-10-60-5, 107796-20-000, sl-1060, ml30-60, ml-30-60, c1615051, cs1000-60, sl10605, ni-200060, ml3060, c1618458, ml10-60, rb8795963, gp660other, sl10-60-5, sl30-60, ni200060, se300a55ps130, 4060, ni2000-60, ml1060, c16-15051, ni-5000-60, ni5000-60, 645, sl-10-60, ni500060, 8195622, ml-10-60, sl3060, gs5000-60, 107796-20, sl10-60, ni-500060, sl10601, sl10-60-1, sl-10605, sl-10601, ni-2000-60, cs1000-60sa, sl1060, cs1000-60-8, c16-18458, sl-10-60-1, SL-30-60.

Extended length from Center Mount to Center Mount is 100 in. This listing includes 2 Lift Supports for Multi Purpose Applications. Easy to install with simple hand tools in just minutes.
BrandStrong Arm #ad
ManufacturerStrong Arm #ad
Height2 Inches
Length10 Inches
Weight0.58 Pounds
Width2 Inches
Part Number4060

10. Lift Supports Depot

#ad

Qty 2 Replaces C16-10125A C1610125 13" Extended x 20 lbs Lift Supports

#ad
Lift Supports Depot #ad - High quality supports, designed to last, to OEM Standards. This listing includes 2 Lift Supports for Multi Purpose Applications. Extended length from Center Mount to Center Mount is 13. 0 in. Compatible with the following oem numbers:c1620125A, C16-20125A, SX130P20 Installs easy with no special tools required.
BrandLift Supports Depot #ad
ManufacturerLift Supports Depot #ad
Height2 Inches
Length13 Inches
Weight1 Pounds
Width2 Inches
Part NumberSX130P20