Top 10 Impact Driver Set – Nut Drivers

As an Amazon Associate I earn from qualifying purchases.

1. ABN

#ad

ABN Impact Nut Driver Tool Set, 6pc SAE 6 IN Long Shank Nut Driver Bits Magnetic Tip Sockets, 1/4 IN Hex Shank

#ad
ABN #ad - Package contents: impact driver socket adapter set includes 6 sae impact drivers 1/4, 5/16, 7/16, 1/2, 3/8, and 9/16 inch and 1 bit driver holder; Each magnetic extended nut driver bit nutsetter tool is permanently laser-etched sizing makes identification easy.

Never drop a fastener again: impact nut driver magnetic impact driver sockets set have powerful magnets to provide superior retention on screws, nuts, and bolts while operating. Impact driver set: use the abn sae magnetic nut driver Bits Impact Drill Sockets Set to tighten and remove nuts and bolts when working in your home, on your vehicle, or on metal or woodworking projects.

Built to last: prevent rounding off fasteners with the recessed 6 point nut drivers for impact drills; Chrome-vanadium steel and black phosphate coating provides maximum strength and rust resistance. Extend your reach: 6-inch 15. 2cm long reach to access narrow spaces and hard-to-reach areas; 1. 25 inch 3. 1cm long hex shanks feature 1/4 inch 6. 35mm diameter.
BrandABN #ad
ManufacturerABN #ad
Height3.6 Inches
Length6 Inches
Weight1.1 Pounds
Width0.4 Inches
Part Number6217

2. LEXIVON

#ad

LEXIVON Impact Grade Socket Adapter Set, and 1/2" Drive, 3/8", 3" Extension Bit with Holder | 3-Piece 1/4", Adapt Your Power Drill to High Torque Impact Wrench LX-101

#ad
LEXIVON #ad - Perfect for the toughest jobs – the black phosphate coating Treatment will make sure that your rust-proof and corrosion-resistant drill to socket adapter will endure any abuse. For a lifetime of successful projects – meet & exceeds ansi the american national Standard Institute and backed by our Lifetime Limited Warranty for your complete peace of mind.

Must-have heavy duty tools for your toolbox – our 3 x impact grade adapters are made from heat treated Chrome Vanadium steel and come in a convenient organizer/holder. One set of impact socket adapters, unlimited uses – the ¼” hex shank will fit all quick Change systems and standard drill chucks, which is ideal for both professionals and DIYers.

Save your time & effort – the chamfered edges and spring-loaded detent ball will ensure a tight and secure fit, thus allowing you to save your precious time and perform auto repair tasks easily.
BrandLEXIVON #ad
ManufacturerLEXIVON #ad
Height3.7 Inches
Length0.6 Inches
Width1.7 Inches
Part NumberLX-101
ModelLX-101

3. Steelman Pro

#ad

Torx, Phillips, Includes Hex, Socket Adapters, Bit Holders, Steelman Pro 50-Piece Impact Driver Bit Set, and Socket Bits

#ad
Steelman Pro #ad - 5 socket adapters - set includes 5 socket adapters: 1/4-inch x 2. 5-inch, 1/2-inch x 2-inch, 1/4-inch x 6-inch, 3/8-inch x 2.5-inch, and 3/8-inch x 6-inch. 20 hex bits - h4, hb4, hb7/32, hb5, h3/16, hb1/4, hb5.5, hb6, h1/4, h5/32, h5.

5, hb3/16, h8, h7/32, h6, hb8, h5/16, h5, hb5/32, and HB5/16. Easily identify bits - sizes are laser etched and the standard and metric hex bits are different lengths for easy identification. Additional bits - two 2. 5-inch ph2 and ph3, t25, t27, t15, t20, t27, t30, and 1/4, 2.5-inch slotted bit, 5/16, and t40, T30, 5-inch T25, 2.5-inch t10, two 5-inch ph2, and T40, and 3/8-inch socket drivers.50-piece set - set of 50 impact grade, quick-release shank bits with a wide variety of lengths and drive types.

Storage case - a blow-molded black plastic storage case is included to keep your bits organized. 4 bit holders - set includes a quick release bit holder in 2. 5-inch 2, 3. 5-inch, and 6-inch lengths. Heat-treated steel - bits are made of industrial grade steel that's been heat treated for optimal torsional performance.
BrandSteelman Pro #ad
ManufacturerSteelman Pro #ad
Weight4 Pounds
Part Number78633
Model78633
WarrantyLimited Lifetime Warranty

4. Alltrade

#ad

648002 1/2" Dr. Impact Driver Kit

#ad
Alltrade #ad - For loosening frozen fasteners using a hammer. Meets or exceeds ANSI standards Lifetime warranty. Tool solutions for most all situations. Includes two slotted and two Phillips bits. Fuel system diagnostic kit #10 Built to exceed tool standards. Highly durable. When you have frozen or rusted screws to break loose, there's no substitute for an impact driver.
BrandAlltrade #ad
ManufacturerPowerbuilt #ad
Height7.5 Inches
Length1.25 Inches
Width8.5 Inches
Part Number648002
Model648002

5. Sunex Tools

#ad

3/4", 19mm, 1/2" Drive Master Impact Hex Driver Set, Heavy Duty Storage Case, Dual Size Markings, 1/4", SAE/Metric, Meets ANSI Standards, Sunex 2637, Cr-Mo Steel, 20Piece, 6mm

#ad
Sunex Tools #ad - Heavy duty storage case: Convenient impact transport and storage. Dual size markings: Laser etched and roll stamped markings to ensure permanent identification.

Lifetime warranty with sunexpress: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex. Cr-mo steel: provides the strength and flexibility to handle high torque impact - tools. Solid one piece. Meets ansi standards: All hex drivers are rigorously tested, ensuring peak performance and durability. Sae: ¼” to ¾”. Metric: 6mm to 19mm. 20 piece set. Construction: Eliminates weak points and increases durability.
BrandSunex Tools #ad
ManufacturerSunex International #ad
Height0 Inches
Length0 Inches
Weight0.03 Pounds
Width0 Inches
Part Number2637
Model2637
WarrantyLifetime

6. Neiko

#ad

Neiko 02446A 1/2" Drive Master Impact Socket Set, 35 Piece Deep Socket Assortment | Standard SAE Inch and Metric Sizes | Includes Ratchet Handle and Extension Bars | Cr-V Steel

#ad
Neiko #ad - The complete set comes with the following pieces: 28 1/2-inch drive sockets sae: 3/8, 22, 1-1/8-inch, 9/16, 10-inch, 7/8, 1-1/4-inch metric: 10, 1/2, 1 1/2 to 3/8-inch drive impact reducer, 1 1/2-inch drive 10-inch quick-release ratchet handle, 11/16, 5/8, 30, 17, 13, 7/16, 1-inch, 21, 12, 3/4, 15/16, 5, 15, 1 1/2-inch drive impact universal joint, 13/16, 24, 3 1/2-inch drive extension bars: 3, 27, 19, 14, 1-1/16-inch, 11, 32mm, 1 3/8 to 1/2-inch drive impact adapter.

Sturdy and strong blow molded case features socket size labels for organized storage and is secured by two lever locks. 6-point hex socket design prevents round-off deterioration under high torque and hammering stress with use of impact and electric wrenches.

Impact pieces are constructed of heavy duty drop-forged premium chrome vanadium steel to withstand extreme levels of torque changes against fasteners. Highly visible laser-etched markings on corrosion resistant black phosphate finish makes it easy to identify drive socket sizes, specs, and measurements.
BrandNeiko #ad
ManufacturerNeiko #ad
Part Number02446A
Model02446A

7. LEXIVON

#ad

LEXIVON 2-Pack Impact Grade Socket Adapter Set, Adapt Your Power Drill To High Torque Impact Wrench LX-101X2, 3/8", 3" Extension Bit With Holder | 3-Piece 1/4", and 1/2" Drive

#ad
LEXIVON #ad - 1/4", 3/8" & 1/2" square drive - equipped with retention ball to prevent dropping, while the chamfered edges will ensure a secure fit onto the socket. Active rust & corrosion protection since they are treated with a rust-proof Black Phosphate coating for enhanced durability under any circumstances.

Get your set of adapters with zero risk – meet & exceeds ansi the american national Standard Institute and backed by our Lifetime Limited Warranty for your complete peace of mind. One set of socket adapters, unlimited uses – the ¼” hex shank will fit all quick Change systems and standard drill chucks, which is ideal for both professionals and DIYers. Enjoy our quality 2-pack saving package - The 3-inch impact grade driver socket adapters, made of heat-treated Chrome Vanadium steel and organized in a convenient holder.
BrandLEXIVON #ad
ManufacturerLEXIVON #ad
Height0.6 Inches
Length3 Inches
Width3 Inches
Part NumberLX-101X2
ModelLX-101X2

8. Neiko

#ad

15 Piece | 6 Point Metric Sizes 10-24 mm | Cr-V Steel, Neiko 02474A 1/2" Drive Deep Impact Socket Set

#ad
Neiko #ad - Innovative 6-point flank drive design grips fastener more tightly on the flat sides and prevents rounding off at corners. High strength impact grade chrome vanadium steel sockets withstand more torque from impact tools and insure longevity.

Permanent high visibility laser etched size marking on each socket for quick size selection, even in dim garages and shops. 15 pieces deep broach metric sockets come in a heavy duty custom case with size index for easy storage: 10, 11, 20, 23, 16, 22, 17, 19, 21, 12, 15, 13, 14, 18, 24 mm. Premium black phosphate coating provides maximum protection from rust and corrosion than traditional black oxide finish.
BrandNeiko #ad
ManufacturerNeiko #ad
Height18.5 Inches
Length2.24 Inches
Weight8.31 Pounds
Width4.61 Inches
Part Number02474A
Model02474A

9. Sunex Tools

#ad

1-1/4", Dual Size Markings, Sunex 4506, 3/4 Inch Drive Impact Hex Driver Set, SAE, Heavy Duty Storage Case, 5-Pieces, Cr-Mo Steel, Solid One Piece Construction, 3/4"

#ad
Sunex Tools #ad - Heavy duty storage case: Convenient transport and storage. Lifetime warranty with sunexpress: Get in the express lane with the industry’s leading warranty rogram and exchange warranted products directly with Sunex.

Dual size markings: Laser etched and roll stamped markings to ensure permanent identification. Meets ansi standards: All hex drivers are rigorously tested, ensuring peak performance and durability. 5 piece set. Low profile design: Access tight spaces. Solid one piece construction: Eliminates weak points and increases durability. Sae: ¾” to 1-¼”. Cr-mo steel: provides the strength and flexibility to handle high torque impact tools.
BrandSunex Tools #ad
ManufacturerSunex International #ad
Height0 Inches
Length0 Inches
Weight7.1 Pounds
Width0 Inches
Part Number4506
Model4506
WarrantyManufacturer

10. Neiko

#ad

Neiko 02443A 3/8" and 1/2" Drive Master Impact Socket Set, 38 Piece Deep and Shallow Assortment | Standard SAE Inch and Metric mm Sizes | Cr-V Steel

#ad
Neiko #ad - Shallow sockets: 10mm, 17mm, 12mm, 24mm15/16; 3 x accessories: 1/2" dr. X 3" extension bar, 11mm7/16", 18mm, 13mm, 1/2" Dr. Also includes 11 x 1/2" dr. Comes in a customized heavy duty case with molded size index for easy and organized storage.

Made from high strength chrome vanadium steel for greater torque, each piece with black electroplate finish for corrosion and oil resistance. Includes 13 x 3/8" dr. F x 3/8" Dr. Shallow sockets: 7/1611mm, 1/2", 16mm5/8", 14mm, 13mm, 11/16, 9/16", 1", 1-1/8", 3/419mm, 3/419mm, 1-1/1627mm, 8mm5/16", 9/16, 17mm; 10 x 1/2" dr. A unique combination of both sae & Metric sizes with deep & shallow length, including 11 duometric sockets to make it a highly versatile set.

X 3" extension bar, 14mm, 16mm5/8, 15mm, 21mm, 3/8" Dr. M adapter. Special 6-point flank drive design turns the flat sides of fasteners and delivers maximum torque, while not stripping and damaging the corners. Deep sockets: 1/2, 11/16", 9mm, 13/16, 7/822mm, 12mm, 1-1/432mm.
BrandNeiko #ad
ManufacturerRidgerock Tools Inc. #ad
Height3.23 Inches
Length14.53 Inches
Weight12.6 Pounds
Width10.59 Inches
Part Number02443A
Model02443A