Top 10 Headlight Connector H1 – Automotive Replacement Electrical Wiring Harnesses

As an Amazon Associate I earn from qualifying purchases.

1. TOMALL

 #ad

TOMALL H1 Male Plug Single Diode Converter Connecting Wiring Harness for LED Headlights Bulb Conversion

#ad
TOMALL #ad - Fit to power: 10w 20w 30w 40w 50w 60w 70w 80w 100w 110w;. Material: abs + Copper Wire;. Fit to voltage: 12v-24v; Installation: Plug and Play;. Fit socket: h1 Male Connector Adapter;. Package include: 2 * Extension Wiring Harness not include lights.
BrandTOMALL #ad
ManufacturerTOMALL #ad
Part NumberH1-Male Socket
Model8542074266

2. HUIQIAODS

 #ad

HUIQIAODS H1 H3 Headlight Fog Light Bulb Extension Socket Wire Harness Connector HolderPack of 2

#ad
HUIQIAODS #ad - It can be use on any standard H1 bulb housing for extension or change. H1 socket holder car wiring connector adapter plug. High quality nylon, heat resistant, resistant to aging, not easily deformed. Fits ;12v power, socket Type: H1 H3. Package content: 2 x Car Light Socket Harness.
BrandHUIQIAODS #ad
ManufacturerH4 WIRING HARNESS 9007 headlight bulb wire H4 bulb socket #ad
Part Numberh1 headlight wiring harness
Modelh1 headlight connector

3. X AUTOHAUX

 #ad

X AUTOHAUX H1 Headlight Bulb Socket Holder Connector for Honda CR-V 2005-2006 33116-SD4-961

#ad
X AUTOHAUX #ad - Easy installation : plug and play, easy to install, no additional tool is required. Please double check carefully to make sure the adapter is the same as your stock to ensure proper fitting. Direct replacement : to replace the old or loosen headlight socket. Part number: 33116-sd4-961 33116SD4961. This headlight bulb socket fits for honda CR-V 2005-2006, for Honda Prelude 1997-2001.
BrandX AUTOHAUX #ad
ManufacturerX AUTOHAUX #ad
Part Numbera19091100ux0955
Modela19091100ux0955

4. Akozon

 #ad

2Pcs Headlight Lamp Bulb Socket Wiring Harness Connector Plug Adapter Line for H1 Bulb, stecker h1 Lampe + H1 Female Adapter Wiring Harness Sockets Wire

#ad
Akozon #ad - Easy to install: pre-wiring can be directly plug and play, stable performance and high reliability. Widely applicable: halogen lamp connector is used for H1 bulb daylight fog/halogen bulb LED/SMD car headlight socket adapter. You just need to plug it in, convenient and easy to use.

It is a direct replacement for factory installed components. Very suitable: our wire connectors can be easily stripped and spliced, and the contacts can firmly fix the bulb. Note: for detailed product parameters, refer to the instructions. It is very easy to install, no other hardware or anything else is needed for installation. Please confirm whether the product is suitable for your equipment before ordering, I wish you a happy life.

It is really easy to install. It is very suitable for upgrading the spare harness of heavy bulbs without worrying about overloading or melting or upgrading projects. High quality: our headlight socket harnesses are made of high-quality plastic and metal materials, which are heat resistant and durable to ensure that they can withstand stressful work and are 100% tested before being delivered to customers. Plug and play.
BrandAkozon #ad
ManufacturerAkozon #ad
Height3.94 Inches
Length3.94 Inches
Weight0.04 Pounds
Width3.94 Inches
Part NumberAkozonkh248smarn1472

5. HUIQIAODS

 #ad

HUIQIAODS H1 H3 Headlight Fog Light Bulb Extension Socket Wire Harness Connector Pack of 2

#ad
HUIQIAODS #ad - Package content: 2*H1 wiring harnessnot include lights. Socket type: h1 h3 H27 male connector adapter. This adapters allow you to install HID / LED kit in your vehicle without destroying the original socket. H1 1 to 2 conversion line, 2 pcs H1 1 to 2 socket holders wire harness for headlight. Fits to install hid / lED kit in your vehicle without destroying the original socket.
BrandHUIQIAODS #ad
Manufacturerh1 socket adapter #ad
Height0.39 Inches
Length3.94 Inches
Width1.97 Inches
Part Numberh1 headlight wiring harness
Modelh1 headlight wiring harness

6. TOMALL

 #ad

TOMALL H1 H3 to 9005 9006 Retrofit Wiring Harness for LED Headlight Fog Light Connector Socket Adapter 40cm16inch

#ad
TOMALL #ad - Fit to voltage: 12v-24v; Installation: Plug and Play;. Material: abs + copper Wire + PVC Pipe;. Total length: 44cm 17. 5inch; extend part: 40cm 16inch; Weight: 47g/pair;. Fit socket: h1 to 9005 / h3 to 9006 Connector Adapter;. Package include: 2 * Extension Wiring Harness not include lights.
BrandTOMALL #ad
ManufacturerH1-9005 Extension #ad
Weight0.1 Pounds
Part NumberH1-9005 Extension

7. DSkoiph

 #ad

DSkoiph 2X H1 Male Extension Wiring Harnes Plug Single Diode LED Headlights Bulb Converter Conversion Connector

#ad
DSkoiph #ad - Compatible power: 10w ~ 110w Voltage: 12V-24V;. Material: high quality ABS plastic and Copper Wire. Package content: 2X Wiring Harness. Compatible with H1 Male Connector Adapter.
BrandDSkoiph #ad
ManufacturerDSkoiph #ad
Part NumberDS459-2

8. uxcell

 #ad

Uxcell DC 12V H1 H3 Car Light Socket Ceramic Headlight Wire Harness Connector 4pcs

#ad
uxcell #ad - Led light socket connector, good for extension/replacement purposes, plug-in light bulb extension, easy DIY installation, could be use to create extra light outlet, no mechanic required. Pre-wired socket, easy plug and play installation. You can connect this socket connector to any 12V power source to create a new light outlet. H1 h3 headlight socket wiring harness connector: It will make your HID/LED Headlight/Foglight retrofit easier a lot. Ceramic base ensures good resistance to heat and long service life.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera19040100ux0056
Modela19040100ux0056

9. iJDMTOY

 #ad

IJDMTOY 2 OEM H1 Socket/Adapter Wires Compatible With Aftermarket Xenon Converison Light or LED Headlight Bulbs Installation

#ad
iJDMTOY #ad - One pair 5" long H1 adapter wires. Made with 18aWG high efficient copper wiring. H1 male adapter on one end with +/- female socket holders on the other end. Designed for installing the leD headlight bulbs or aftermarket HID conversion kit, minimizing the modification and making the process plug and play.
BrandiJDMTOY #ad
ManufactureriJDMTOY Auto Accessories #ad
Weight0.05 Pounds
Part NumberAA1287
ModelFor Repair, Conversion, Custom Retrofit

10. Yosoo Health Gear

 #ad

2pcs Conversion Wiring Connector Cable Holder Adapter for LED Headlight Bulbs, H1 LED Conversion Cable

#ad
Yosoo Health Gear #ad - 100% satisfaction: if you have any question about this item, please feel free to contact us, we will help you within 24 hours. Premium material: this converter wiring cable is made of high quality ABS plastic material, with heat resistance, reliable and practical to connect.

Easy to install: this adapter converter wiring cable allows you to install it on your vehicle without breaking the old socket, can be finished in seconds. High performance: stable characteristics, high efficiency, professional performance, and has high reliability; Heavy duty, good heat resistance, and will never melt. Application: h1 led replacement external plug single diode converter wiring cable is suitable for LED Headlight Bulbs Accessories.
BrandYosoo Health Gear #ad
ManufacturerYosoo Health Gear #ad
Height3.94 Inches
Length3.94 Inches
Weight0.04 Pounds
Width3.94 Inches
Part NumberYosoo Health Geari0fpbut1kx

Tags: