As an Amazon Associate I earn from qualifying purchases.

Bumper weight: about 153 lbs. Comes with a 12000-pound capacity winch plate. High strength d-ring mounts welded both inside and out with 4. 75-ton capacity. Not compatible with Factory Sensors. With a skid plate for engine protection.



Corrosion resistance: textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use. Bumper weight: about 133 lbs. Order will be shipped in 2 packages, including front bumper; winch plate for up to 12000 lbs; D-rings 9500 lbs rated, d-rings w/ rubber rings; 4x 18W LED spotlights; mounting hardware accessories; Installation instruction.

Simple bolt-on installation, no cutting or drilling required. Package 3: assembled rear bumper; 2×18W LED floodlights; Mounting hardware accessories; Installation instruction. Bumper weight: about 80 lbs.
Not compatible with front and rear factory sensors. Rear bumper compatible with factory receiver hitch. Construction: heavy-duty, high tensile 10-gauge9/64 Inch steel for rear bumper; 11-gauge1/8 Inch steel for front bumper; 8-gauge11/64 Inch for mounting bracket plate. Mounting hardware accessories; Installation instruction. Bumper weight: about 133 lbs.


Premium quality retainer assortment: gooACC push rivets are made of heavy-duty plastic & nylon, robust and vibration resistant, which is strong, would not break or crack easily.
Widely application: theses push clips are widely used for car body clips, Fender clips, bumper clips, door panel clips, trim panel retainer, door trim fastener, motor vehicles, domestic appliances, engine cover and splash shield retainers replacement. If you there is any issue after sale such as inappropriate size& shape, please check the size, we will offer 100% satisfactory service. It always covers some applications include telecom equipment, furniture and electrical equipment.

This is a great mod for people who are always at the pits. We promise we will give you a satisfied solution after we confirmed it. They are perfect for people who go to the pits often and are not difficult to install.
Need to attach and detach your bumper quickly? quick release fasteners are great for front bumpers, rear bumpers, and hatch lids that need to be frequently removed. You will need a hex tool as well as a wrench to fasten everything together. Afterwards, Drill the holes. After, mount it back with the rubber band. You can either put the rubber band in the normal way or even a cross with the same result.

Rear bumper compatible with factory receiver hitch. Corrosion resistance: textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use. Package 2: assembled rear bumper; 2×18W LED floodlights; Mounting hardware accessories; Installation instruction.
Rear bumper weight about 92 lbs. Not compatible with front and rear factory sensors. Simple bolt-on installation, no cutting or drilling required. Construction: heavy-duty, high tensile 10-gauge9/64 Inch steel for rear bumper; 11-gauge1/8 Inch steel for front bumper; 8-gauge11/64 Inch for mounting bracket plate. Mounting hardware accessories; Installation instruction. Include mounting holes for licence plate and licence plate light.
1. MBI AUTO
#ad
Chrome, TO1002182, Steel Front Bumper Face Bar for 2007 2008 2009 2010 2011 2012 2013 Toyota Tundra Pickup 07-13, MBI AUTO
#adMBI AUTO #ad - Lifetime Warranty. Direct fit OE Replacement Part. 100% customer Satisfaction Guaranteed. Ships same business Day if Ordered by Noon EST. Fits models without park Assist ONLY.More information #ad
Brand | MBI AUTO #ad |
Manufacturer | MBI AUTO #ad |
Height | 12 Inches |
Length | 60 Inches |
Weight | 37 Pounds |
Width | 7 Inches |
Part Number | TO1002182.MBIAUTO.U |
More information #ad
2. Hooke Road
#ad
Hooke Road for Toyota Tundra Bumper Full Width Front Bumper with Winch Plate & Towing Hooks for Tundra 2007-2013 Regular | Double | CrewMax Cab
#adHooke Road #ad - And 4×18w leD spotlights. 9500 lbs rated, 3/4'' D-rings included. Textured black powder coated finish and Premium E-coating process for 5-year corrosion protection under normal use.Bumper weight: about 153 lbs. Comes with a 12000-pound capacity winch plate. High strength d-ring mounts welded both inside and out with 4. 75-ton capacity. Not compatible with Factory Sensors. With a skid plate for engine protection.
More information #ad
Heavy-duty, high tensile 11-gauge1/8 inch steel for the bumper main body, 8-gauge11/64 Inch for the winch plate mounting structure. Audacious off-road design, protects vehicles from on & off-road debris. Delicate hollowed-out honeycomb design in both sides. Easy bolt-on installation front bumper fits for toyota tundra 2007 2008 2009 2010 2011 2012 2013.Brand | Hooke Road #ad |
Manufacturer | Hooke Road #ad |
Weight | 153 Pounds |
Part Number | BXG.5200AB |
More information #ad
3. BUMPERS THAT DELIVER
#ad
Steel Front Bumper Bumper Face Bar for 2007-2013 Toyota Tundra w/Park Assist 07-13, TO1002181, BUMPERS THAT DELIVER, Chrome
#adBUMPERS THAT DELIVER #ad - Ships same business day if Ordered by Noon 12pm EST. Lifetime Warranty. 100% customer Satisfaction Guaranteed. Direct fit OE Replacement Part. For models with park Assist Sensor Holes.More information #ad
Brand | BUMPERS THAT DELIVER #ad |
Manufacturer | BUMPERS THAT DELIVER #ad |
Height | 17 Inches |
Length | 84 Inches |
Weight | 24 Pounds |
Width | 19 Inches |
Part Number | TO1002181.BTD.U |
More information #ad
4. Smittybilt
#ad
Smittybilt 612840 M1 Front Trunk Bumper for Toyota Tundra
#adSmittybilt #ad - Smittybilt advantage warranty - limited lifetime warranty/5 year finish warranty. Built in winch plate to accommodate up to 16.More information #ad
5k winch. Solid plate center section that wraps the frame horns and lower cross member. Ultra bright driving and fog lights. Solid mount d-rings - welds on the inside and out.Brand | Smittybilt #ad |
Manufacturer | Smittybilt #ad |
Height | 30 Inches |
Length | 86 Inches |
Weight | 75 Pounds |
Width | 19 Inches |
Part Number | 612840 |
Model | 612840 |
More information #ad
5. Hooke Road
#ad
Hooke Road Tundra Bumper Steel Full Width Front Bumper with Winch Plate Compatible with Toyota Tundra 2007-2013 Truck
#adHooke Road #ad - Construction: heavy-duty, high tensile 11-gauge1/8 Inch steel for the bumper main body, 7-gauge3/16 Inch for the structure mounting bracket. Not compatible with Factory Back-Up Sensors.Corrosion resistance: textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use. Bumper weight: about 133 lbs. Order will be shipped in 2 packages, including front bumper; winch plate for up to 12000 lbs; D-rings 9500 lbs rated, d-rings w/ rubber rings; 4x 18W LED spotlights; mounting hardware accessories; Installation instruction.
More information #ad
Audacious, angular off-road design with low-profile hoop. Protects vehicles from on & off-road debris. Design: easy bolt-on installation. Fitment: compatible with toyota tundra 2007 2008 2009 2010 2011 2012 2013 Models.Brand | Hooke Road #ad |
Manufacturer | Hooke Road #ad |
Weight | 133 Pounds |
Part Number | BXG.5205AB-1 |
More information #ad
6. Hooke Road
#ad
Hooke Road Tundra Front Winch Bumper & Rear Bumper Kit for Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 Pickup Truck Textured Black Steel
#adHooke Road #ad - Fitment: both front and rear bumper for 2007-2013 Tundra Pickup Truck. Design: rugged styling and full protection bumper. Order will be shipped in 3 packages. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar.Simple bolt-on installation, no cutting or drilling required. Package 3: assembled rear bumper; 2×18W LED floodlights; Mounting hardware accessories; Installation instruction. Bumper weight: about 80 lbs.
More information #ad
Include mounting holes for licence plate and licence plate light. 4×18w led spotlights. Package 1&2: assembled front bumper; 2 d-rings; 12000-pound capacity winch plate. Corrosion resistance: textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use. Not compatible with front and rear factory sensors. Rear bumper compatible with factory receiver hitch. Construction: heavy-duty, high tensile 10-gauge9/64 Inch steel for rear bumper; 11-gauge1/8 Inch steel for front bumper; 8-gauge11/64 Inch for mounting bracket plate. Mounting hardware accessories; Installation instruction. Bumper weight: about 133 lbs.
Brand | Hooke Road #ad |
Manufacturer | Hooke Road #ad |
Part Number | Z.BXG.5205AB+5206 |
More information #ad
7. Garage-Pro
#ad
Garage-Pro Front Bumper Cover Compatible with Toyota Tundra 2007-2013 Primed Plastic
#adGarage-Pro #ad - With molding Holes. Free 1-year unlimited mileage warranty coverage on Garage-Pro items purchased thru AUTO PARTS GIANT Store. Without parking aid sensor holes, Without tow hook hole, With fog light holes, Without license plate provision.More information #ad
Plastic, Primed. A high quality, direct Fit OE Replacement Bumper Cover from Garage-Pro.Brand | Garage-Pro #ad |
Manufacturer | Garage-Pro #ad |
Height | 12 Inches |
Length | 23 Inches |
Width | 46 Inches |
Part Number | JCWRBT010305PGP |
Warranty | 1-year, unlimited-mileage Garage-Pro warranty |
More information #ad
8. GOOACC
#ad
Mazda etc, Nissan, Toyota, Honda, GOOACC, GRC-34 Push Bumper Fastener Rivet Clips with 18 Most Popular Sizes Auto Push Pin Rivets for Benz, Subaru, BMW
#adGOOACC #ad - 18 most common size: gooacc push retainer clips are suitable for mercedes benz, BMW, Subaru, if the sizes and shape meet your requirement, Mazda, NISSAN, Honda, TOYOTA, Lancer for exact replacement. Note: gooacc offers clear pictures for your reference, please email us directly, type and shape to make sure the item is the one that you need.Premium quality retainer assortment: gooACC push rivets are made of heavy-duty plastic & nylon, robust and vibration resistant, which is strong, would not break or crack easily.
More information #ad
Bonus auto fastener remover - allow you to quickly and easily remove car door panel trim clips and upholstery clips without causing damage to them. Easy access into confined areas. Not only for the cars we mention, it also works well. Widely application: theses push clips are widely used for car body clips, Fender clips, bumper clips, door panel clips, trim panel retainer, door trim fastener, motor vehicles, domestic appliances, engine cover and splash shield retainers replacement. If you there is any issue after sale such as inappropriate size& shape, please check the size, we will offer 100% satisfactory service. It always covers some applications include telecom equipment, furniture and electrical equipment.
Brand | GOOACC #ad |
Manufacturer | GOOACC #ad |
Part Number | GRC-34 |
Model | GRC-34 |
Warranty | 2 Years Warranty |
More information #ad
9. Ouzorp
#ad
Bumper Trunk Quick Release Front Rear Bumper Fastener Kit …
#adOuzorp #ad - We also will give you a positive evaluation. As you can see, the installation does not take too long to install, and the drilling is completely worth it for the fresh new look. Enjoy your quick bumper release fasteners! 100% satisfaction -when you receive the goods, if there are any problem, please contact us and do not directly open the dispute.This is a great mod for people who are always at the pits. We promise we will give you a satisfied solution after we confirmed it. They are perfect for people who go to the pits often and are not difficult to install.
More information #ad
First, mark where you will install the quick bumper release kit. Then, install the aluminum knot. Put the washer on the other side of the bumper/fender. Package includes: 4 x quick release tabs; 4 x Stainless steel bolts; 4 x Nuts; 4 x Washers; 2x O-Rings. Need to attach and detach your bumper quickly? quick release fasteners are great for front bumpers, rear bumpers, and hatch lids that need to be frequently removed. You will need a hex tool as well as a wrench to fasten everything together. Afterwards, Drill the holes. After, mount it back with the rubber band. You can either put the rubber band in the normal way or even a cross with the same result.
Brand | Ouzorp #ad |
Manufacturer | Ouzorp #ad |
Part Number | Ouzorp-BR-01 |
More information #ad
10. Hooke Road
#ad
Hooke Road Tundra Solid Steel Front Bumper w/Skid Plate & Rear Bumper Kit Compatible with Toyota Tundra 2007-2013 Pickup Truck Textured Black
#adHooke Road #ad - Front bumper equipped with a skid plate for engine protection. Front bumper weight about 110 lbs. Design: rugged styling and full protection bumper. Fitment: both front and rear bumper for 2007-2013 Tundra Pickup Truck.Rear bumper compatible with factory receiver hitch. Corrosion resistance: textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use. Package 2: assembled rear bumper; 2×18W LED floodlights; Mounting hardware accessories; Installation instruction.
More information #ad
Order will be shipped in 2 packages. Package 1: assembled front bumper; 2 d-rings; 1×120w led light bar22 inches and 2×18W LED cube lights. Rear bumper weight about 92 lbs. Not compatible with front and rear factory sensors. Simple bolt-on installation, no cutting or drilling required. Construction: heavy-duty, high tensile 10-gauge9/64 Inch steel for rear bumper; 11-gauge1/8 Inch steel for front bumper; 8-gauge11/64 Inch for mounting bracket plate. Mounting hardware accessories; Installation instruction. Include mounting holes for licence plate and licence plate light.
Brand | Hooke Road #ad |
Manufacturer | Hooke Road #ad |
Part Number | Z.BXG.5204+5201-1 |
More information #ad