As an Amazon Associate I earn from qualifying purchases.
DC Sports #ad - 100 percent stainless steel with Flat Black Finish. It helps to create a more aggressive sound while adding a sporty look to your vehicle.
Design: the multiple point clamp-on exhaust is made using T304 stainless steel that resists corrosion. Product dimensions: 2-1/4in inlet x 3-3/4in outlet x 9in long. Fits 1. 5" to 2" diameter piping.
DC Sports #ad - 3 bolt clamping System. Resonated to enhance sound. Fits- 1. 75-2. 5 inch Piping. Easy install, bolts on in minutes. Polished silver finish. Adds visual appeal.
LCGP #ad - Easy to install: bolt on installation, not easy to screw off. Made of high quality Stainless steel with strong anti-corrosive, Never Rusty. There are a small hole on bottom of tip to drain water, not easy to accumulate water and prevent rust.
UPOWER #ad - Easy installationNo weld and drill needed. For tailpipes of 5 inch OUTER diameter only. Please do measure your tailpipe. Materialblack Power Coated. Just fix the screw to the appropriate location of tailpipe by Wrench.
A-KARCK #ad - Unique design - bottom has a drainage hole, which will not affect the appearance and can drain smoothly to avoid rust. Material - made of stainless steel to protect the existing tailpipe from corrosion and deformation. Appearance - the pure and elegant black exterior can perfectly decorate your vehicle.
LCGP #ad - There are a small hole on bottom of tip to drain water, not easy to accumulate water and prevent rust. Easy slip on 3" outside diameter tailpipe. High quality stainless steel infused with anti-corrosive agents that prevent your exhaust tip from rusting.
DC Sports #ad - Easy 3 bolt install, installs in minutes. Slant cut outlet. Resonated to enhance sound. Polished stainless steel finish.
UPOWER #ad - Fit all cars that tailpipe outlet diamater is 2 1/2 inch. Professional installation is highly recommended. Materialmirror polished t304 stainless steel. High quality Burnt blue. Durable and Anti-corrosive, never Rusty.
AUTOSAVER88 #ad - Dimension: standard 4" x 6" x 15" inlet, outlet, and overall length respectively. Daily maintenance: to make this exhaust tip has a long-life service - Please Sweep away the welding debris, white ash, oil, putty, cement, sand ash regularly to keep the surface clean.
Notice: please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip 4 inches.
Stylish look: stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage. We recommend to do above action once a month. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 4 inches.
1. DC Sports
#adAnd Trucks, Matte Black Powdercoat, DC Sports EX-1012B Performance Bolt-On Resonated Muffler Slant Tip with Clamps and Adapters for Universal Fitment on Most Cars, Sedans
#adDesign: the multiple point clamp-on exhaust is made using T304 stainless steel that resists corrosion. Product dimensions: 2-1/4in inlet x 3-3/4in outlet x 9in long. Fits 1. 5" to 2" diameter piping.
More information #ad
Affordable performance: the exhaust tip is designed to boost the intensity of the exhaust notes. Resonated tips are to enhance sound output. The exhaust tip is TIG-welded by hand. Slanted Tip Shape. It has a straight-through design for top power output. It has a 3-bolt clamp system for easy installation.| Brand | DC Sports #ad |
| Manufacturer | DC Sports #ad |
| Height | 2.25 Inches |
| Length | 9 Inches |
| Weight | 1.8 Pounds |
| Width | 3.75 Inches |
| Part Number | EX-1012B |
| Model | EX-1012B |
More information #ad
2. DC Sports
#adSedans, and Trucks, Polished Stainless Steel, DC Sports EX-1013 Performance Bolt-On Resonated Muffler Slant Exhaust Tip with Clamps and Adapters for Universal Fitment on Most Cars
#adMore information #ad
| Brand | DC Sports #ad |
| Manufacturer | Pilot Automotive #ad |
| Height | 9 Inches |
| Length | 4 Inches |
| Weight | 1.55 Pounds |
| Width | 4 Inches |
| Part Number | EX-1013 |
| Model | EX-1013 |
More information #ad
3. LCGP
#ad2.5 Inch Inlet Exhaust Tip,2.5" x 4" x 12" Polished Exhaust Tailpipe Tip for Truck With Bolt On Design
#adMore information #ad
2. 5 inch inside diameter inlet, 4 inch outside diameter outlet, 12 inch overall length. Note: if you think it isn’t tight enough, additional welding will be a nice safeguard. Polished surface treatment and Rolled Edge & Angled Cut design.| Brand | LCGP #ad |
| Manufacturer | LCGP #ad |
| Height | 9 Inches |
| Length | 21 Inches |
| Width | 12.5 Inches |
| Part Number | 254012RACB |
More information #ad
4. UPOWER
#adUpower Universal Diesel Black Exhaust tip 5 Inch Inlet 10" Outlet 15" Long Stainless Steel Tailpipe for Trucks Car
#adMore information #ad
Designbolt on - rolled edge - 70 Degree Single Angle Cut. High quality stainless steel. Wide applicationuniversal fits 5" inlet diesel trucks pickup car exhaust system. 1 year warranty. Dimension5 inch inlet; 10 inch Outlet; 15 inch overall Length.| Brand | UPOWER #ad |
| Manufacturer | PartsSquare #ad |
| Part Number | 165730 |
More information #ad
5. A-KARCK
#adUniversal 4'' Inlet 6" Outlet 12" Long Stainless Steel Bolt On Exhaust Tailpipe Black Muffler Tip for Truck, A-KARCK 4 Inch Exhaust Tip
#adMore information #ad
Bolt on installation - no welding or drilling is needed, just slide the tip into place on the tailpipe and tighten with a wrench. 4" id exhaust tip - 4" inlet diameter 6" outlet diameter 12" overall length, universal fits 4" outer diameter tailpipe. Black coating prevents rain erosion.| Brand | A-KARCK #ad |
| Manufacturer | A-KARCK #ad |
| Height | 12 Inches |
| Length | 6 Inches |
| Width | 6 Inches |
| Part Number | N-406012RACBK |
More information #ad
6. LCGP
#ad3" x 4" x 12" Long Clamp Bolt On Exhaust Tailpipe Tip for Truck, LCGP 3“ Inlet Exhaust Black Tip
#adMore information #ad
Black powder coated surface treatment, high temperature resistance, not easy to scratch & fall off. However, welding is recommended. 3 inch inside diameter inlet, 4 inch outside diameter outlet, 12 inch overall length.| Brand | LCGP #ad |
| Manufacturer | LCGP #ad |
| Height | 4.5 Inches |
| Length | 13.7 Inches |
| Width | 4.5 Inches |
| Part Number | 304012RACK4 |
More information #ad
7. DC Sports
#adSedans, and Trucks, Matte Black Powdercoat, DC Sports EX-1011B Performance Bolt-On Resonated Muffler Tip with Clamps and Adapters for Universal Fitment on Most Cars
#adDC Sports #ad - 3 bolt clamp System. Inlet diameter : 2. 875", outlet diameter : 3. 75", length : 9". Easy install, bolts on in minutes. Fits 1. 75" to 2. 5" pipes. Flat black finish. Resonated to enhance sound.More information #ad
| Brand | DC Sports #ad |
| Manufacturer | DC Sports #ad |
| Height | 9 Inches |
| Length | 3.9 Inches |
| Weight | 1.8 Pounds |
| Width | 3.9 Inches |
| Part Number | EX-1011B |
| Model | EX-1011B |
More information #ad
8. DC Sports
#adDC Sport EX-2012 Stainless Steel Oval Slant Cut Bolt-on Exhaust Tip
#adMore information #ad
| Brand | DC Sports #ad |
| Manufacturer | Pilot Automotive #ad |
| Height | 3.1 Inches |
| Length | 8.1 Inches |
| Weight | 2.9 Pounds |
| Width | 7.7 Inches |
| Part Number | EX-2012 |
| Model | EX-2012 |
More information #ad
9. UPOWER
#adUpower 2.5 Inch Inlet 3.5 Inch Outlet Dual Exhaust Tips Tailpipe 2.5" to 3.5" 9.75" Length Stainless Steel Polished Vacuum Plating Blue 1.2mm Thickness Weld On Tail PipeSingle Wall,Rolled Edge
#adMore information #ad
Wide applicationuniversal fits 2. 5" inlet trucks pickup car exhaust tailpipe system. 1 year warrantyno instruction is included. Dimension2. 5 inch inlet diameter;3. 5 inch outlet diameter;Overall Length: 9. 75 inch. Designweld on installation and Angled Cut - Rolled Edge.| Brand | UPOWER #ad |
| Manufacturer | Partssquare #ad |
| Part Number | 179874 |
More information #ad
10. AUTOSAVER88
#adAUTOSAVER88 4 Inch Inlet Black Exhaust Tip, 4" Inlet 6" Outlet 15" Overall Length Stainless Steel Exhaust Tips Powder Coated Finish Tailpipe
#adNotice: please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip 4 inches.
More information #ad
Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle. Not just make it louder: thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Stylish look: stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage. We recommend to do above action once a month. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 4 inches.
| Brand | AUTOSAVER88 #ad |
| Manufacturer | AUTOSAVER88 #ad |
| Height | 6 Inches |
| Length | 15 Inches |
| Weight | 6 Pounds |
| Width | 4 Inches |
| Part Number | J006 |
| Model | 5841844472 |
More information #ad
