As an Amazon Associate I earn from qualifying purchases.
Tekonsha #ad - 5 amp/hour battery and breakaway switch with 7. 5" lead wires. Corrosion resistant, heavy-duty polymer case to protect battery and charger, with flat surface mount.
BUNKER INDUST #ad - Push to test: led's indicate fully charged, charging or needs recharge. For use on trailers with an existing electric brake system. Quick and easy installation, side-mount installation design.
Hopkins Towing Solutions #ad - Leds indicate when battery is fully charged, when it needs to be re-charged, or while it is charging. Built-in battery meter with LED test lights. Features built-in battery charger that charges battery while it’s plugged into the vehicle.
Bright Way Group #ad - Breakaway cable length: 4' rechargeable Battery: 12V 5Ah Outer Box Dimensions: 7. 12" l x 5. 25" w x 4. 25" h. Kit includes: breakaway switch, built in charger, 5-amp-hour battery, battery box and wiring *Hardware not included for drilling.
Convenient wiring diagram is printed on box. Use wire loom to neatly contain and protect wires. 30 second activation after pin is pulled. Mount in any position. Side load: easy access from the side. Complete side load trailer breakaway kit.
Meets DOT requirements. Built-in charger automatically charges 12v 5ah rechargeable battery while connected to tow vehicle. Check the charge, charge the battery while connected and bring your trailer to a safe stop if it separates from your vehicle. Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Brakes receive signal to activate when cable detaches from switch.
CURT #ad - Dot-requirements. If your vehicle and trailer become disconnected while towing, the breakaway kit activates the trailer brakes automatically. The battery, and charger is in the plastic box assembled with the other wiring for direct installation. Mounting this trailer brake breakaway kit on your towing setup is easy.
This trailer breakaway kit meets dot requirements for holding / breakaway situations. To keep the trailer breakaway system well-protected from the outdoor elements, the trailer breakaway switch comes with a nylon case that will not rust or corrode, and the battery case features a durable plastic construction.
To ensure a strong electrical connection to the electric trailer brakes, battery charger, this trailer breakaway system comes with a trailer breakaway battery, battery case and trailer breakaway switch. It includes a 12-volt, 5-amp battery with charger and can be used on trailers with up to 3 axles. The trailer breakaway switch has a 48-inch cable for flexible attachment, and the battery case comes with pre-drilled mounting holes hardware not included. Dependable power.
CURT #ad - If your vehicle and trailer become disconnected while towing, the breakaway kit activates the trailer brakes automatically. The battery features a simple push-button test to ensure a good charge. Reliable safety. To keep the trailer breakaway system well-protected from the outdoor elements, the trailer breakaway switch comes with a nylon case that will not rust or corrode, and the battery case features a durable plastic construction.
Easy to install. It includes a 12-volt, 5-amp battery and can be used on trailers with up to 3 axles.
Mounting this trailer brake breakaway kit on your towing setup is easy. The trailer breakaway switch has a cable for flexible attachment, and the battery case comes with pre-drilled mounting holes hardware not included. This trailer breakaway system comes with a battery, battery case and trailer breakaway switch. It is compatible with the CURT charger #52025 sold separately. Dot-requirements. Dependable power. Weather-resistant.
Hopkins Towing Solutions #ad - Regulation 393. 43 d. Complete system includes box, charger, 7 inch switch, battery, and hardware. Regulation 393. 43 d. 1-2 axle capacity, uses a 5-amp hour battery.
Break away system exceeds D. O. T. Activates trailer brakes upon separation from the tow vehicle. Built-in led battery meter verifies battery charge and built-in battery charger charges battery while connected with the tow vehicle.
CURT #ad - The trailer breakaway switch has a 48-inch cable for flexible attachment, and the battery case comes with a one-bolt mounting bracket. Easy to install. This trailer breakaway kit serves as a safeguard while towing, using your electric trailer brakes.
This trailer breakaway kit meets dot requirements for holding / breakaway situations. Reliable safety. Weather-resistant. If your vehicle and trailer become disconnected while towing, the breakaway kit activates the trailer brakes automatically.
Dependable power. Mounting this trailer brake breakaway kit on your towing setup is easy. To keep the trailer breakaway system well-protected from the outdoor elements, the trailer breakaway switch comes with a nylon case that will not rust or corrode, and the battery case features a durable plastic construction. It includes a 12-volt, 5-amp battery and can be used on trailers with up to 3 axles.
FIERYRED #ad - Ultimate strong casing: this strengthened plastic case is all weatherproof and is built to offer ultimate protection for the charger inside. Ultra convenience: this trailer breakaway switch kit system is equipped with indicator light, through which you could gain a quick understanding of the status of the system.
Ultra convenience: this trailer breakaway switch kit system is equipped with indicator light, through which you could gain a quick understanding of the status of the system.
1. Tekonsha
#adTekonsha 50-85-313 Shur-Set III Breakaway System with LED Test Meter, Battery, Breakaway Switch and Charger, Black
#adMore information #ad
For use on 1, 2 or 3 axle trailers equipped with electric brakes. Push to test led's indicate fully charged, charging or recharge. Multi-stage integrated charger provides a fast recharge up to 12. 8 volts.| Brand | Tekonsha #ad |
| Manufacturer | Tekonsha #ad |
| Height | 5.12 Inches |
| Length | 4.72 Inches |
| Weight | 0.1 Pounds |
| Width | 6.5 Inches |
| Part Number | 50-85-313 |
| Model | 50-85-313 |
| Warranty | 1 Year |
More information #ad
2. BUNKER INDUST
#adBUNKER INDUST Trailer Brakes Breakaway Kit with Charger, LED Indicator, Switch, 12V 5AH Battery for Trailer Caravan
#adMore information #ad
Weather and corrosion resistant. Activates trailers brakes upon separation from tow vehicle to ensure a safe stop of the trailer. Complete system includes: Break Away Unit, Battery&Break Away Switch.| Brand | BUNKER INDUST #ad |
| Manufacturer | BUNKER INDUS #ad |
| Part Number | TRAILER-B-FRD |
More information #ad
3. Hopkins Towing Solutions
#adHopkins 20099 Engager LED Test Break Away System with Battery Meter
#adMore information #ad
Activates trailer brakes upon separation from tow vehicle. Complete system includes box, charger, battery, 7" switch, and hardware.| Brand | Hopkins Towing Solutions #ad |
| Manufacturer | Hopkins Towing Solution #ad |
| Height | 5.25 Inches |
| Length | 7.25 Inches |
| Weight | 4.2 Pounds |
| Width | 4.5 Inches |
| Part Number | 20099 |
| Model | 20099 |
| Warranty | Hopkins warrants all products to be free from defects in material and workmanship, under normal use and service, for a peirod of 90 days from the date of original purchase, with the exception of the Brake-Force and Impulse brake control items, which are warranted to be free from defects in material and workmanship, under normal use and service, for the original buyer's lifetime |
More information #ad
4. Bright Way Group
#adBright Way 2382 Complete Trailer Breakaway Kit Side Load with LED Charge Indicator 12V5AH Battery Emergency Trailer Brake Switch
#adConvenient wiring diagram is printed on box. Use wire loom to neatly contain and protect wires. 30 second activation after pin is pulled. Mount in any position. Side load: easy access from the side. Complete side load trailer breakaway kit.
More information #ad
Led function indicates battery status: Green = fully charged, Yellow = charging, Red = recharge needed. Durable, heavy duty polymer plastic case protects the battery from the elements and rubber O-ring seal keeps out moisture. Meets DOT requirements. Built-in charger automatically charges 12v 5ah rechargeable battery while connected to tow vehicle. Check the charge, charge the battery while connected and bring your trailer to a safe stop if it separates from your vehicle. Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Brakes receive signal to activate when cable detaches from switch.
| Brand | Bright Way Group #ad |
| Manufacturer | Bright Way #ad |
| Part Number | 2382 |
More information #ad
5. CURT
#adCURT 52040 Soft-Trac 1 Trailer Breakaway Switch Kit System with Battery and Charger , black
#adThis trailer breakaway kit meets dot requirements for holding / breakaway situations. To keep the trailer breakaway system well-protected from the outdoor elements, the trailer breakaway switch comes with a nylon case that will not rust or corrode, and the battery case features a durable plastic construction.
More information #ad
Easy to install. Weather-resistant. Reliable safety. This trailer breakaway kit serves as a safeguard while towing, using your electric trailer brakes. To ensure a strong electrical connection to the electric trailer brakes, battery charger, this trailer breakaway system comes with a trailer breakaway battery, battery case and trailer breakaway switch. It includes a 12-volt, 5-amp battery with charger and can be used on trailers with up to 3 axles. The trailer breakaway switch has a 48-inch cable for flexible attachment, and the battery case comes with pre-drilled mounting holes hardware not included. Dependable power.
| Brand | CURT #ad |
| Manufacturer | Curt Manufacturing #ad |
| Height | 6 Inches |
| Length | 9 Inches |
| Weight | 5.05 Pounds |
| Width | 6 Inches |
| Part Number | 52040 |
| Model | 52040 |
| Warranty | One-Year Limited Warranty |
More information #ad
6. Hopkins Towing Solutions
#adHopkins 20001 Traditional Break Away Kit
#adHopkins Towing Solutions #ad - Kit includes 24-inch wires, two U-bolts, four nuts, four washers, four mounting screws, and a battery charger. Side mountable. Built-in battery charger charges battery while plugged into the vehicle.More information #ad
Protected by limited 90-day manufacturer warranty from the date of original purchase. Break away systems are legally required in most states and provinces.| Brand | Hopkins Towing Solutions #ad |
| Manufacturer | Hopkins Manufacturing #ad |
| Height | 7.38 Inches |
| Length | 5.81 Inches |
| Weight | 0.5 Pounds |
| Width | 5.31 Inches |
| Part Number | 20001 |
| Model | 20001 |
| Warranty | Hopkins warrants all products to be free from defects in material and workmanship, under normal use and service, for a peirod of 90 days from the date of original purchase, with the exception of the Brake-Force and Impulse brake control items, which are warranted to be free from defects in material and workmanship, under normal use and service, for the original buyer's lifetime |
More information #ad
7. CURT
#adCURT 52042 Push-to-Test Trailer Breakaway Switch Kit System with Battery , black
#adEasy to install. It includes a 12-volt, 5-amp battery and can be used on trailers with up to 3 axles.
More information #ad
This trailer breakaway kit serves as a safeguard while towing, using your electric trailer brakes. This trailer breakaway kit meets dot requirements for holding / breakaway situations. Mounting this trailer brake breakaway kit on your towing setup is easy. The trailer breakaway switch has a cable for flexible attachment, and the battery case comes with pre-drilled mounting holes hardware not included. This trailer breakaway system comes with a battery, battery case and trailer breakaway switch. It is compatible with the CURT charger #52025 sold separately. Dot-requirements. Dependable power. Weather-resistant.
| Brand | CURT #ad |
| Manufacturer | Curt Manufacturing #ad |
| Height | 4.75 Inches |
| Length | 7.25 Inches |
| Weight | 4.88 Pounds |
| Width | 5.25 Inches |
| Part Number | 52042 |
| Model | 52042 |
| Warranty | One-Year Limited Warranty |
More information #ad
8. Hopkins Towing Solutions
#adHopkins 20400 Engager FT Break Away System with LED Battery Monitor
#adBreak away system exceeds D. O. T. Activates trailer brakes upon separation from the tow vehicle. Built-in led battery meter verifies battery charge and built-in battery charger charges battery while connected with the tow vehicle.
More information #ad
Activates trailer brakes upon separation from the tow vehicle^built-in led battery meter verifies battery charge and built-in battery charger charges battery while connected with the tow vehicle^Complete system includes box, battery, 7 inch switch, charger, and hardware^1-2 axle capacity, uses a 5-amp hour battery^Break-Away kit exceeds D. O. T.| Brand | Hopkins Towing Solutions #ad |
| Manufacturer | Hopkins Manufacturing #ad |
| Height | 6.63 Inches |
| Length | 7.63 Inches |
| Weight | 0.5 Pounds |
| Width | 4.81 Inches |
| Part Number | 20400 |
| Model | 20400 |
| Warranty | Hopkins warrants all products to be free from defects in material and workmanship, under normal use and service, for a period of 90 days froim the date of original purchase, with the exception of the Brake-Force and Impulse brake control items, which are warranted to be free from defects in material and workmanship, under normal use and service, for the original buyer's lifetime |
More information #ad
9. CURT
#adBlack, CURT 52026 Soft-Trac 2 Trailer Breakaway Switch Kit System with Battery
#adThis trailer breakaway kit meets dot requirements for holding / breakaway situations. Reliable safety. Weather-resistant. If your vehicle and trailer become disconnected while towing, the breakaway kit activates the trailer brakes automatically.
More information #ad
Dot-requirements. To ensure a strong electrical connection to the electric trailer brakes, battery case and trailer breakaway switch compatible with CURT charger #52025, this trailer breakaway system comes with a battery, sold separately. Dependable power. Mounting this trailer brake breakaway kit on your towing setup is easy. To keep the trailer breakaway system well-protected from the outdoor elements, the trailer breakaway switch comes with a nylon case that will not rust or corrode, and the battery case features a durable plastic construction. It includes a 12-volt, 5-amp battery and can be used on trailers with up to 3 axles.
| Brand | CURT #ad |
| Manufacturer | Curt Manufacturing #ad |
| Height | 6 Inches |
| Length | 9 Inches |
| Weight | 4.5 Pounds |
| Width | 6 Inches |
| Part Number | 52026 |
| Model | 52026 |
| Warranty | One-Year Limited Warranty |
More information #ad
10. FIERYRED
#adFIERYRED Trailer Brakes Breakaway Kit-Valved Regulated Sealed Lead Acid Battery JP12-7 12V 7AH
#adUltra convenience: this trailer breakaway switch kit system is equipped with indicator light, through which you could gain a quick understanding of the status of the system.
More information #ad
Reliable power: the system is also equipped with a push-button test to ensure reliable charging. Ultimate safety: the trailer breakaway switch kit system is designed to activate the brake of the trailer when it has disconnected from the vehicle.| Brand | FIERYRED #ad |
| Manufacturer | Zhongxin #ad |
| Part Number | K-VABS00-PA |
| Model | K-VABS00-PA |
More information #ad
