Top 10 Amc 360 Intake Manifold – Automotive Replacement Engine Intake Manifolds

As an Amazon Associate I earn from qualifying purchases.

1. Edelbrock

#ad

Edelbrock 2131 Performer Aluminum Intake Manifold

#ad
Edelbrock #ad - Will not accept stock Motor craft spread-bore carburetor. Dual-plane, low-rise intake manifolds with a 180 degree firing order. Available with non-EGR style. Boosts torque from off-idle to 5, 500 RPM. Comes with a natural finish.
BrandEdelbrock #ad
ManufacturerEdelbrock #ad
Height0 Inches
Length0 Inches
Weight20.24 Pounds
Width0 Inches
Part Number2131
Model2131
Warranty90 Day Manufacturer

2. Assault Racing Products

#ad

Assault Racing Products PC5026 for Small Block Chrysler/Plymouth/Dodge Dual Plane Satin Aluminum Intake 1500-6500 RPM SBM 318 340 360

#ad
Assault Racing Products #ad - Later model a/C compressors will not clear thermostat housing. Open air gap under plenum for cooler fuel charge. Manifold height: 5. 50 in. Rpm range: 1500 - 6500 Uses early 2. 48" diameter thermostat & housing.
BrandAssault Racing Products #ad
ManufacturerAssault Racing Products #ad
Part NumberPC5026

3. Edelbrock

#ad

Edelbrock 7101 Performer RPM Intake Manifold

#ad
Edelbrock #ad - 4. Intended for high-performance street or competition engines. Produces incredible top-end horsepower. 20 inch height and 5. Larger plenums and runners to match the free-flowing exhaust. 25 inch rear. Provides power like a single-plane and throttle response like a dual-plane.
BrandEdelbrock #ad
ManufacturerEdelbrock #ad
Height5.6 Inches
Length21.9 Inches
Weight5 Pounds
Width11.5 Inches
Part Number7101
Model7101
Warranty90 Day Manufacturer

4. Edelbrock

#ad

Edelbrock 7501 Performer RPM Air-Gap Intake Manifold

#ad
Edelbrock #ad - Temperature sending unit boss clears all water necks. Air-gap design separates the runner from the heat of the lifter-valley cover. Will not fit under stock corvette hood and is meant for square bore carburetors. Dual plane intake style with an Air-Gap. No provision for exhaust heated chokes and no exhaust cross-over.
BrandEdelbrock #ad
ManufacturerEdelbrock #ad
Height6.7 Inches
Length23.8 Inches
Weight19.33 Pounds
Width12.2 Inches
Part Number7501
Model7501
Warranty90 Day Manufacturer

5. Edelbrock

#ad

Edelbrock 2116 Performer Vortec Aluminum Intake Manifold

#ad
Edelbrock #ad - No provision for exhaust-heated chokes. Have provisions for external water bypass. Accepts late model water neck, alternator, HEI and air conditioning. Accepts both square-bore and spread-bore carburetors. Improves torque over a wide RPM range of 5, 500 .
BrandEdelbrock #ad
ManufacturerEdelbrock #ad
Height0 Inches
Length0 Inches
Weight18 Pounds
Width0 Inches
Part Number2116
Model2116
Warranty90 Day Manufacturer

6. Weiand

#ad

Weiand 8126 Street Warrior Square/Spread Bore Satin Intake Manifold with 1987 and Later Cast Iron Heads

#ad
Weiand #ad - Has an all new optimized design for today’s higher output big block engines. Made from permanent mold 319 aluminum construction and is precision CNC machined providing lighter castings with better surface finishes. Universal dual pattern carb flange that accepts spread bore and square bore carbs. Features a low rise dual plane design delivering friendly power and torque across the usable RPM range.
BrandWeiand #ad
ManufacturerWeiand #ad
Height0 Inches
Length0 Inches
Weight16.15 Pounds
Width0 Inches
Part Number8126
Model8126
WarrantyY

7. Edelbrock

#ad

Edelbrock 2701 Performer Intake Manifold

#ad
Edelbrock #ad - Rpm range is idle to 5, 500 RPM. Fit type: Vehicle Specific. Dual plane intake style. Made of aluminum with a natural finish. Single carburetor without EGR. Use on stock or original equipment standard deck.
BrandEdelbrock #ad
ManufacturerEdelbrock #ad
Height5.7 Inches
Length22.4 Inches
Weight14.3 Pounds
Width10.6 Inches
Part Number2701
Model2701
Warranty90 Day Manufacturer

8. Edelbrock

#ad

Edelbrock 2101 Performer Intake Manifold

#ad
Edelbrock #ad - Has provisions to add oil fill tube. Intake is made of aluminum material with a natural finish. Fit type: Vehicle Specific. Basic operating rpm is from idle to 5, 500 RPM. Intake is 50-state street legal, when used with the correct carburetor and in the correct application. Dual plane intake style.
BrandEdelbrock #ad
ManufacturerEdelbrock #ad
Height5.6 Inches
Length22.6 Inches
Weight14.5 Pounds
Width10.5 Inches
Part Number2101
Model2101
WarrantyOne Year Limited Warranty

9. Edelbrock

#ad

Edelbrock 2925 Super Victor Intake Manifold

#ad
Edelbrock #ad - Are found on oval tracks, in drag racing, and on NASCAR engines. 80 square-inch cross-section. Runners have a 2. Made of aluminum material with a natural finish. Match the flat floor entry of the latest 23 degree heads. Fit type: Vehicle Specific. Designed for heads with a standard port location.
BrandEdelbrock #ad
ManufacturerEdelbrock #ad
Height0 Inches
Length0 Inches
Weight20.04 Pounds
Width0 Inches
Part Number2925
Model2925
Warranty90 Day Manufacturer

10. Weiand

#ad

Weiand 8007 Action Plus Intake Manifold

#ad
Weiand #ad - High rise, dual plane design with no EGR provision. Power band is from idle to 6000 RPM. Overall height of the manifold measures 4. 88 front and 5. 94 rear. Port is 1. 96 tall and 1 wide. Spread bore and square bore carburetor mounting flange.
BrandWeiand #ad
ManufacturerWeiand #ad
Height7.2 Inches
Length22.4 Inches
Weight21.5 Pounds
Width14.2 Inches
Part Number8007
Model8007
Warranty90 Days