Top 10 4S Lipo Battery – Automotive Replacement Batteries & Accessories
As an Amazon Associate I earn from qualifying purchases.

5. The battery charging detection interface with DC output in the form of needle.



The battery charging protector board is compatible with 12. 8v/14. 4v battery pack. Please feel free to contact us if you have any question.


Over charge detection voltage: 4. 28+ 005 v. Over discharge voltage: 2. 55±008. Over charging voltage: 4.



In the use of the battery will be hot, this situation can not be used for a long time, the battery rate is not applicable, the battery will be damaged quickly. The protection board measures 35*35*3.
Magnification formula: 1c rate battery, 2000 capacity equals 2AH*1=2A upper limit working current. The power range described applies to the following products: low power inverters, monitoring backup power supplies, LED light backup power supplies, massager battery packs, electronics, solar street light battery packs, and other products.
1. Traxxas
#ad
Traxxas 2970 EZ-Peak Plus 4-Amp NiMH/LiPo Fast Charger with iD Auto Battery Identification
#adTraxxas #ad - Advanced mode for full manual control of charger settings and integrated balance ports for conventional LiPO batteries. Refer user manual for troubleshooting steps. Charges 5-8-cell nimh batteries and 2S and 3S LiPO batteries.More information #ad
Charger recognizes traxxas id batteries to automatically program and optimize charger settings. Easy to use interface with charge progress indicator and integrated cooling fan. One button lipo storage charge protects your battery investment and advanced high-resolution peak detection delivers a perfect charge.Brand | Traxxas #ad |
Manufacturer | Traxxas #ad |
Height | 2 Inches |
Length | 6 Inches |
Weight | 0.8 Pounds |
Width | 6 Inches |
Part Number | 2970 |
Model | 2970 |
Warranty | No Warranty |
More information #ad
2. Organizer
#ad
Organizer 2pcs 4S 30A 14.8V Li-ion Lithium 18650 Battery BMS Packs PCB Protection Board Balance Integrated Circuits
#adOrganizer #ad - 3. Battery"-", p- charging port and port on the negative electrode. For connecting cables, use copper wire over 3 square millimeters, or six 10c-15c power batteries ordinary 18650 battery can not start the drill!! Recommended power battery models: SONY VTC4, VTC4A, VTC5A, the shorter the better can not use nickel plate!!!.5. The battery charging detection interface with DC output in the form of needle.
More information #ad
1. Over charge protection, over current protection function, over discharge protection function, short circuit protection function, balance. Do the same mouth. 4. Conditions for starting the drill: to successful starting the drill requires three 15c-20c power batteries, vtc6. 2. Charging port of the plate and the discharge port is the same, both positive and B- connecting.Brand | Organizer #ad |
Manufacturer | Organizer #ad |
More information #ad
3. diymore
#ad
Enhanced 4S 40A 14.8V 16.8V 18650 Charger Li-ion Lithium Battery Protection Board PCB BMS Lipo Cell Module with Balance Function for Drill Motor
#addiymore #ad - Highlight: over-discharge protection, overcurrent protection, overcharge protection. High charge and discharge current; Compact size and lightweight. High-accuracy voltage detection circuit, fine workmanship and durable.More information #ad
Mos transistor can control the battery charge and discharge, low standby current consumption. For connecting cables, use copper wire over 3 square millimeters, the shorter the better can not use nickel plate!!! .Brand | diymore #ad |
Manufacturer | diymore #ad |
Height | 0.13 Inches |
Length | 1.81 Inches |
Weight | 0.02 Pounds |
Width | 2.36 Inches |
Part Number | A6040298 |
Model | 4S40AUS |
More information #ad
4. HiLetgo
#ad
HiLetgo 14.8V 4S 30A 18650 Li-ion Lithium Battery BMS PCB Integrated Circuits Protection Board Cell Balance
#adHiLetgo #ad - Main function: over charge protection, short circuit protection function, over discharge protection function, over current protection function, balance. 14. 8v 4s 30a 18650 li-ion lithium battery bms PCB Integrated Circuits Protection Board Cell Balance.More information #ad
Working current: 30a. Charging voltage: 16. 8v-18v, the best is 17v. Size:56*48*4mm. High-accuracy voltage detection circuit, fine workmanship and durable.Brand | HiLetgo #ad |
Manufacturer | HiLetgo #ad |
Part Number | 3-01-1548 |
More information #ad
5. IS
#ad
Icstation 14.4V 30A 4S Lithium Battery Protection PCB BMS Board Lipo Battery Capacity Tester Module Set
#adIS #ad - 4 sections led displays the battery voltage, which enable you easy to realize the battery status. 12. 8v 14. 4v 15a 4 series li-ion battery charge discharge protection board with high working current up to 30A.The battery charging protector board is compatible with 12. 8v/14. 4v battery pack. Please feel free to contact us if you have any question.
More information #ad
Https://www. Amazon. Com/hz/help/contact/A243HB0NZWY05K. The battery status indicator is suitable for 16. 8v battery 4 series li-ion battery. Overcharge detecting voltage:3. 9±0025v, over discharge detecting voltage:2. 30±008v. The input voltage should be equal to the rated voltage of the battery pack12. 8v or 14. 4v.Brand | IS #ad |
Manufacturer | Icstation #ad |
Part Number | 10948+11056 |
Model | 4S Battery Capacity Tester Protection |
More information #ad
6. Baoblaze
#ad
Baoblaze Premium 3.7V Lipo Lithium Battery Charger USB Cords Drone Charging Cables
#adBaoblaze #ad - Fit for 2. 54mm terminal, speaker, wireless toys, etc. Rc drone charger. Using excellent raw materials, the power consumption is lower.More information #ad
Brand new and high quality, durable, long working life. Perfectly suitable for 3. 7v lithium battery charging cable. It can give your battery a good charging protection.Brand | Baoblaze #ad |
Manufacturer | Baoblaze #ad |
Part Number | 5d839d273116b73ae093a7b3abb81b9e |
More information #ad
7. daier
#ad
14.8V 4S 30A 18650 Lithium Battery BMS PCB Integrated Circuits Protection Board
#addaier #ad - Working current: 30A. Because the equalization current of the equalization IC is about 65mA, the chaCannot be used for xenon lamp, sweeper battery pack, power tool type battery pack, hand drill battery pack, 550 or more power.Over charge detection voltage: 4. 28+ 005 v. Over discharge voltage: 2. 55±008. Over charging voltage: 4.
More information #ad
08 ± 01. In order to achieve a better balance of the balance effect, baby car battery pack, electric bicycle battery pack, and most of the 16.8 lithium battery chargers on the market, vacuum cleaner, please use a 17V power supply and a current capacity of 02 times self-stop current is less than 30mA.Brand | daier #ad |
Manufacturer | daier #ad |
Part Number | E880 |
Model | E880 |
More information #ad
8. aikeec
#ad
2S ~3S 5S 10S ~17S Li-ion Lifepo4 LTO Battery Active Equalizer BMS 1.2A Balancer
#adaikeec #ad - 100% brand new and high quality. Working voltage 2. 2v-4. 5v. The smaller the current, the static power consumption does not exceed 20uA. When the battery error voltage is above 01v, the balance work is started until the error is stopped at 30mv.More information #ad
The built-in improved ultra-low internal resistance MOS, the balance current is 0-1. 2a, and the battery voltage difference is smaller.Brand | aikeec #ad |
Manufacturer | aikeec #ad |
Part Number | 19390002 |
More information #ad
9. daier
#ad
Daier 4S 50A w/Balance 3.7V 18650 Lithium Battery Cell PCB BMS Protection Board
#addaier #ad - Discharge current: 50A. Charging Current: 50A. Package included: 1 x Lithium Battery BMS Protection Board with cable. Charge temperature Protection: -7℃-50℃. Balance Function: Yes. Short circuit Protection: Yes.More information #ad
Brand | daier #ad |
Manufacturer | daier #ad |
Part Number | E1132 |
More information #ad
10. Comidox
#ad
Comidox 2PCS 4S 20A 14.8V Li-ion Lithium 18650 Battery BMS PCM Protection PCB Board Module 16.8V Overcharge Over Discharge Short Circuit Protection
#adComidox #ad - This protection board can not be used for lithium iron phosphate battery, xenon lamp, electric fish battery pack, hand drill battery pack, electric bicycle battery pack, baby car battery, 775 4A and above motor, 1W fisheye LED light!.In the use of the battery will be hot, this situation can not be used for a long time, the battery rate is not applicable, the battery will be damaged quickly. The protection board measures 35*35*3.
More information #ad
0mm, and the components are S-8254AA protection chip and D403*4 pieces. 3c rate battery, 2000 capacity equals 2AH*3=6A upper limit working current. Note: for discharge products above 3a, the discharge rate of the battery should be more than 3C. Magnification formula: 1c rate battery, 2000 capacity equals 2AH*1=2A upper limit working current. The power range described applies to the following products: low power inverters, monitoring backup power supplies, LED light backup power supplies, massager battery packs, electronics, solar street light battery packs, and other products.
Brand | Comidox #ad |
Manufacturer | Comidox #ad |
Part Number | CP338 |
More information #ad