Top 10 3mm Fuel Hose – Automotive Replacement Vacuum Hoses

As an Amazon Associate I earn from qualifying purchases.

1. AC PERFORMANCE

#ad

Black 60 psi Maximum Pressure, OD 0.27" 7mm, High Performance Silicone Vacuum Tubing Hose, ID 0.12" 3mm, 10 Feet per roll 3 Meter

#ad
AC PERFORMANCE #ad - It applies to general purpose air or water transportation in the engine bay. 60 psi maximum pressure rating. Heavy wall design gives it the ability to handle extreme pressure. Made of premium silicone material to ensure strength and durability. No logo, hose inside diameter: 012" 3mm, od 027" 7mm, length: 10 Feet Roll. Broad operation temperature : -76f to 374F -60C to 190C.
BrandAC PERFORMANCE #ad
ManufacturerFOURAGE #ad
Height0.6 Inches
Length0.6 Inches
Weight0.02 Pounds
Width1.5 Inches
Part NumberVacuum Hose
ModelVT

2. uxcell

#ad

Uxcell Fuel Line Hose Oil Tube, 3mm1/8" ID x 5mm3/16" OD 10ft Rubber Water Hose Engine Pipe Tubing Black

#ad
uxcell #ad - 004" thin tube wall providing higher flow rates and working pressure. Please note- the hose can transport fuel, but it is not recommended to be installed on equipment for a long time; it is not recommended to use this NBR hose for transporting petrol and diesel oil.

Feature- lubricating tube measures 012-inches inside diameter by 02-inches outside diameter by 9. 84-feet total length. Application- lubricating Line Hose mainly used to transport lubricating oil. Advantage- lubricating hose has Oil resistant, lightweight, aging resistant, soft, good bending performance, wear resistant, smooth appearance. Nbr material- lubricating pipe made in NBR, Nitrile Butadiene Rubber has the characteristics of high temperature resistance, oil resistance, high vacuum resistance.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera19051400ux0477

3. ITACO

#ad

Fuel Hose Gas Line 3MM Chainsaw Trimmer Brushcutter Generator Ø3 ID x Ø5.5 OD 2.5 Meter

#ad
ITACO #ad - This fuel line resists swelling, abrasion and hardening, while it maintains air tight seal on fittings even in extreme temperatures. Fuel line dimensions: i. D = 3. 0 mm. 118", o. D = 6. 0 mm. 236", length = 2. 5 meters 8. 20 ft. However, please let us know. Note: the fuel line comes from factory in rolls of 25m, if you need to buy longer piece but without being cut in 8. 2 ft 2. 5 m increments, but it is typically offered with this listing as 8. 2 ft 2. 5 m increments. Brand: itaco premium quality Top-quality Fuel Line.
BrandITACO #ad
ManufacturerITACO #ad
Part NumberID:3MM (OD: 6MM)

4. uxcell

#ad

Uxcell Fuel Line Hose 3mm1/8" ID x 5mm3/16" OD 3.3ft Oil Pipe Water Tube Black Rubber Tubing

#ad
uxcell #ad - Nbr material- lubricating pipe made in NBR, Nitrile Butadiene Rubber has the characteristics of high temperature resistance, oil resistance, high vacuum resistance.

Please note- the hose can transport fuel, but it is not recommended to be installed on equipment for a long time; it is not recommended to use this NBR hose for transporting petrol and diesel oil. Application- lubricating Line Hose mainly used to transport lubricating oil. Feature- lubricating tube measures 012-inches inside diameter by 02-inches outside diameter by 3. 28-feet total length. 004" thin tube wall providing higher flow rates and working pressure. Advantage- lubricating hose has Oil resistant, lightweight, soft, wear resistant, good bending performance, aging resistant, smooth appearance.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera19051400ux0476

5. DYNAPEX

#ad

Bulkhead Barb Brass Mender Fitting 1/8” Hose ID Fuel Boat Air Splicer

#ad
DYNAPEX #ad - Bulkhead Barb Fitting Splicer. Second end: 1/8” Barb. First end: 1/8” Barb. Interchange part For: Weatherhead 1074X5. Overall length: 1 3/8".
BrandDYNAPEX #ad
ManufacturerDynapex #ad
Weight0.01 Pounds
Part Numberhb32b_02

6. WYKA

#ad

WYKA 10.8-13.3mm Range Stainless Steel-304 Single Ear Hose Clamps,Crimp Pinch Fitting,Fuel Line Hose Clips Water Pipe Air Tube Silicone Vacuum Hose Clamp Fastener 27/64"-33/64",50 Pack

#ad
WYKA #ad - P>thickness:06mm, width: 7mm. P>. P>. P>package include: 50pcs, Package Weight:118g. P>this clamp fit for 27/64"-33/64"108-13. 3mm hose diameter. P>. P>widely use for general connection between hose and hard pipe, automotive hose, such as fuel filter, cooling hose, pump, CV connector, hydraulic system, mechanical equipment, etc. P>. P>made of 304 stainless steel, anti-rust, anti-corrosion, sturdy and durable to use.
BrandWYKA #ad
Manufacturerws #ad
Part Number50 Pack Tube Clamp

7. DYNAPEX

#ad

Fitting UNF 10-32 Male X Barb 1/8” or 3mm Hose ID Air Fuel Gas Boat 2 Units

#ad
DYNAPEX #ad - Package Quantity: 2. Barb end b: 1/8” or 3 mm Hose ID. Thread end a: unf 10-32. Unf male to hose Barb Fitting. Material: brass or Nickel Plated Brass see picture for two versions in stock.
BrandDYNAPEX #ad
ManufacturerDynapex #ad
Weight0.01 Pounds
Part Numberhb32m_02_u10_32m

8. ACDelco

#ad

ACDelco 32100 Professional 25 ft Bulk Reel of 1/8 in Fuel Line/PCV/EEC Hose

#ad
ACDelco #ad - Nbr-pvc cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments. Nitrile tube that is spiral reinforced for enhanced durability. Warning: do not use for pressure lines on fuel injected engines or for cooling system applications. Vacuum rating of 24 in/hg for sizes less than 1?2 in I. D. And 10 in/hg for sizes 1?2 in to 3?4 in I. D. Use an acdelco specialty Premium Fuel Injection Hose MPI for fuel injection applications. Intended for use with fuels where MTBE concentrations are no greater than 15% by volume. At ambient temperatures.
BrandACDelco #ad
ManufacturerACDelco #ad
Height6 Inches
Length6.5 Inches
Weight1.11 Pounds
Width6 Inches
Part Number32100
Model32100
WarrantyLimited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details.

9. steber

#ad

Fuel Line 1/4" ID NBR Hose 4AN Push on Hose 0.47" OD for Small Engines, 10 feet

#ad
steber #ad - Id: 1/4 inch, od: 047 inch / 12mm, 4 an nbR liner hose, 10 feet. Burst pressure 6mpa, The Fuel Lines are oil resistant, cold-resistant and ethanol tolerance. Handles temperature ranges of -40 to +275 degrees F. Push on / lock hose designed for conveying gasoline, diesel, and bio-diesel fuels in cars, buses, trucks, E-85, etc. Working pressure 2mpa. Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines.
Brandsteber #ad
Manufacturersteber #ad
Part NumberBNBRID6-10

10. Hilitchi

#ad

Hilitchi 72 pcs Spring Band Type Action Fuel/Silicone Vacuum Hose Pipe Clamp Low Pressure Air Clip Clamp 10 x 7mm 10mm 11mm 14mm 16mm 17mm

#ad
Hilitchi #ad - High quality spring clips for hose air hose, silicone hose, water pipe, automotive fuel line, etc. Organized within a convenient Plastic Storage Case, Plastic Box Can Be Reused. Package included: 10 x 7mm, 10 x 10mm, 10 x 16mm, 10 x 11mm, 10 x 14mm, 10 x 17mm. Material: 65Mn Spring Steel. Packing quantity: 72pcs, 6 sizes, each size 12pcs.
BrandHilitchi #ad
ManufacturerHilitchi #ad
Height0.78 Inches
Length7.4 Inches
Width5.1 Inches
Part NumberFBA_HSC-72