Top 10 3 Inch Inlet Resonator Exhaust Tip – Automotive Replacement Exhaust Pipes

As an Amazon Associate I earn from qualifying purchases.



Bolt/ Clamp-On, Rolled Angle Cut, AUTOSAVER88 3 Inch Inlet Black Exhaust Tip, 3" Inlet 5" Outlet 12" Overall Length Powder Coated Finished Stainless Exhaust Pipe Tip for 3" Outer Diameter Tailpipe

AUTOSAVER88 #ad - Anti-deformation & rustproof: built from high-grade stainless steel with black powder coated finished, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well; plus, a drainage hole helps drain water to prevent rust.

Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaustNOTE: Professional installation would be highly recommended. Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.

Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with no drilling or welding needed. Dimension: standard 3" x 5" x 12"inlet, outlet, and overall length; universal fit for vehicles with 3-inch outlet diameter exhaust pipes please make sure the outlet outer diameter of your vehicle tailpipe is 3" before purchase.
BrandAUTOSAVER88 #ad
ManufacturerAUTOSAVER88 #ad
Height5 Inches
Length12 Inches
Weight2.5 Pounds
Width3 Inches
Part NumberJ008

2. peastorm


Universal Performance Resonator Dual Loud Exhaust Tip 3 Inch Inlet for Trucks Car, Peastrom Glasspack 3 Inch Muffler Exhaust Pipe

peastorm #ad - The quiet resonator adopts a unique double-layer spiral structure, deep tone, both ends can be inlet, filled with fiberglass absorbs unwanted interior resonance, get a low, no inlet or outlet difference.

Utilizes spiral design helps strengthen back pressure at low rpms, and improve exhaust efficiency at high rpm. This product needs welding installation, and professional installation is strongly recommended. Universal performance mufflers 3" inlet 3" outlet 14" long 4. 3" round body width, as long as your exhaust pipe is 3 inch and have enough space to install, it will be fit. Stainless steel construction provides long-lasting durability, withstands high exhaust temperature.
Brandpeastorm #ad
Manufacturerpeastorm #ad
Height5 Inches
Length14 Inches
Width5 Inches
Part Numberzd-wx-76
Model3 inch
WarrantyManufacturer warranty for 90 days from date of purchase.



AUTOSAVER88 2.5 Inch Inlet Exhaust Tip, 2.5" Inlet 3" Outlet 6" Overall Length Stainless Steel Exhaust Tips Chrome-Plated Finish Tailpipe

AUTOSAVER88 #ad - Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage. We recommend to do above action once a month NOTE: Professional installation would be highly recommended. Daily maintenance: to make this exhaust tip has a long-life service - Please Sweep away the welding debris, putty, oil, white ash, cement, sand ash regularly to keep the surface clean.

Not just make it louder: thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle. Notice: please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip 2.

5 inches. Stylish look: stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe. Standard dimension: standard 2. 5" x 3" x 6" inlet, outlet, overall length exhaust tip. Universally compatible with vehicles which exhaust pipes Outer Diameter is 2. 5 inch.
BrandAUTOSAVER88 #ad
ManufacturerAUTOSAVER88 #ad
Height3 Inches
Length6 Inches
Weight1.2 Pounds
Width2.5 Inches
Part NumberJ030
Warranty1 Year Warranty



A-KARCK 12" Overall Length Polishing Bolt On Exhaust Tailpipe Tip Protect Tailpipe, Exhaust Tip 3" Inlet to 5" Outlet

A-KARCK #ad - Repeatedly polished surface prevents rain erosion. Material: made of stainless steel to protect the existing tailpipe from corrosion and deformation.

3" id exhaust tip: 3" inlet diameter 5" outlet diameter 12" overall length, universal fits 3 inch outer diameter tailpipe. Unique design: bottom has a drainage hole, which will not affect the appearance and can drain smoothly to avoid rust. Bolt on installation: no welding or drilling is needed, just slide the tip into place on the tailpipe and tighten with a wrench. Appearance: the pure and elegant silver exterior can perfectly decorate your vehicle.
BrandA-KARCK #ad
ManufacturerA-KARCK #ad
Height12 Inches
Length5 Inches
Width5 Inches
Part NumberNew305012RACB

5. Jinsanity Performance


Bolt-On Design, 3" x 4" x 12" Inches Inside Diameter Chrome-Plated Stainless Steel Exhaust Tip, JinsanityPerformance 3 Inch Inlet Exhaust Tip

Jinsanity Performance #ad - Dimension3 inch inside diameter inlet, 4. 5 inch outside diameter outlet, 9 inch overall length. Installation& protectionuniversal exhaust, mirror polished surface treatment and Rolled Edge - 20 Degree slant cut, laser engraving JINSANITY PERFORMANCE on the side of the outlet pipe.

Materialhigh quality, durable chrome stainless steel exhaust tip and polished. Avoid rusting and deformation from rain, sun and snow. Designpolished stainless steel finish, Easy bolt on Installation, no weld or drill needed. 2 year warranty24 months warranty: Feel free to contact our customer service if you have any problem with our product.
BrandJinsanity Performance #ad
ManufacturerJinsanity Performance #ad
Part NumberHJ-304012RA



LCGP 3" Inlet Universal Exhaust Tip, 4" Outlet, 5" Long, Stainless Steel Double Wall Angle Cut

LCGP #ad - Made of high quality T304 stainless steel for long-lasting durability. 3 inch inlet universal exhaust tip, Stainless Steel, double Wall Angle, 4" Outlet 5" Overall Length. Surface finished:Polished & Tig welding Exhaust Tip. Installation type: Weld-on. Professional Installation is recommended. Protect your original pipe from the sun and rain, avoid rusting and deformation.
BrandLCGP #ad
ManufacturerLCGP #ad
Height4 Inches
Length5.5 Inches
Width4 Inches
Part Number304005DAC

7. DC Sports


Polished Stainless Steel, DC Sports EX-1012 Performance Bolt-On Resonated Exhaust Tip with Clamps and Adapters for Universal Fitment on Most Cars, Sedans, and Trucks

DC Sports #ad - Package weight : 2. 0 lbs. Slanted Tip Shape. Country of Origin : China. Resonated tips Are To Enhance Sound Output.
BrandDC Sports #ad
ManufacturerDC Sports #ad
Height9 Inches
Length4 Inches
Width4 Inches
Part NumberEX-1012

8. Tritrust


Black Exhaust tip, 3 Inch Inlet Bolt on Design- Stainless Steel Car Muffler Tips 3" ID x 4"OD x 8"L

Tritrust #ad - Made by high quality stainless steel with black coating to enhance the appearance of your car. Please measure your own pipe and bumper cutout, and compare to this product fitment size. This muffler tips won’t change the function of your car. Size : inlet diameter 3'' / outlet diameter 4''/ Length 8'' / width 4''. Bolt-on installation: slide on easily over your existing tailpipe, then secure in place with bolts.
BrandTritrust #ad
ManufacturerTritrust #ad
Part NumberT00004BK

9. DC Sports


Matte Black Powdercoat, Sedans, DC Sports EX-1012B Performance Bolt-On Resonated Muffler Slant Tip with Clamps and Adapters for Fitment on Most Cars, and Trucks

DC Sports #ad - 3 bolt clamping system, inlet: 2. 25 inch, outlet: 3. 75 inch, length: 9 Inch. Resonated tips Are To Enhance Sound Output. Slanted tip shape. Cut type: Slant Cut. Product dimensions: 2-1/4in inlet X 3-3/4In Outlet X 9In Long. Coated stainless steel Resonated Bolt-On Exhaust Tip- Black. 100 percent stainless Steel With Flat Black Finish.
BrandDC Sports #ad
ManufacturerDC Sports #ad
Height2.25 Inches
Length9 Inches
Weight1.8 Pounds
Width3.75 Inches
Part NumberEX-1012B



3" Inlet/4" Outlet, 3" Inlet NETAMI Carbon Fiber Stainless steel Exhaust Tip 3" Inlet Blue

NETAMI #ad - Real glossy carbon fiber with UV protection will never Fade or Rust. Please measure your factory's pipe before place a order. Made with high quality stainless steel with carbon Fiber finished. Fit type: Universal Fit. Dimension: inlet: 3", outlet: 4", Overall Length: 9". Come with a custom clamp, easy to Install and fit over 3" factory pipe. One year parts warranty.
BrandNETAMI #ad
ManufacturerNETAMI #ad
Height4 Inches
Length10 Inches
Weight1.4 Pounds
Width4 Inches
Part NumberNT-3052