As an Amazon Associate I earn from qualifying purchases.
AUTOSAVER88 #ad - Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with no drilling or welding needed. Dimension: standard 3" x 5" x 12"inlet, outlet, and overall length; universal fit for vehicles with 3-inch outlet diameter exhaust pipes please make sure the outlet outer diameter of your vehicle tailpipe is 3" before purchase.
Anti-deformation & rustproof: built from high-grade stainless steel with black powder coated finished, rust and deformation to protect & decorate your tailpipe system well; plus, our exhaust tips effectively resist heat, a drainage hole helps drain water to prevent rust.
Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaustNOTE: Professional installation would be highly recommended.
peastorm #ad - Utilizes spiral design helps strengthen back pressure at low rpms, and improve exhaust efficiency at high rpm. The quiet resonator adopts a unique double-layer spiral structure, deep tone, get a low, both ends can be inlet, filled with fiberglass absorbs unwanted interior resonance, no inlet or outlet difference.
This product needs welding installation, and professional installation is strongly recommended.
AUTOSAVER88 #ad - Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle. Stylish look: stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe.
Not just make it louder: thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds.
5 inch. We recommend to do above action once a month NOTE: Professional installation would be highly recommended. Notice: please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip 2. 5 inches. Standard dimension: standard 2. 5" x 3" x 6" inlet, outlet, overall length exhaust tip.
A-KARCK #ad - Unique design: bottom has a drainage hole, which will not affect the appearance and can drain smoothly to avoid rust. Bolt on installation: no welding or drilling is needed, just slide the tip into place on the tailpipe and tighten with a wrench.
Material: made of stainless steel to protect the existing tailpipe from corrosion and deformation.
Jinsanity Performance #ad - 2 year warranty24 months warranty: Feel free to contact our customer service if you have any problem with our product. Materialhigh quality, durable chrome stainless steel exhaust tip and polished.
Avoid rusting and deformation from rain, sun and snow. Dimension3 inch inside diameter inlet, 4. 5 inch outside diameter outlet, 9 inch overall length.
LCGP #ad - 3 inch inlet universal exhaust tip, Double Wall Angle, stainless Steel, 4" Outlet 5" Overall Length. Protect your original pipe from the sun and rain, avoid rusting and deformation.
DC Sports #ad - Slanted Tip Shape. Country of Origin : China. Package weight : 2. 0 lbs. Resonated tips Are To Enhance Sound Output.
Tritrust #ad - Please measure your own pipe and bumper cutout, and compare to this product fitment size. Made by high quality stainless steel with black coating to enhance the appearance of your car.
DC Sports #ad - Slanted tip shape. 3 bolt clamping system, inlet: 2. 25 inch, outlet: 3. 75 inch, length: 9 Inch. 100 percent stainless Steel With Flat Black Finish.
NETAMI #ad - Dimension: inlet: 3", outlet: 4", Overall Length: 9". Come with a custom clamp, easy to Install and fit over 3" factory pipe. Please measure your factory's pipe before place a order.
1. AUTOSAVER88
#adAUTOSAVER88 3 Inch Inlet Black Exhaust Tip, Rolled Angle Cut, 3" Inlet 5" Outlet 12" Overall Length Powder Coated Finished Stainless Exhaust Pipe Tip for 3" Outer Diameter Tailpipe, Bolt/ Clamp-On
#adAnti-deformation & rustproof: built from high-grade stainless steel with black powder coated finished, rust and deformation to protect & decorate your tailpipe system well; plus, our exhaust tips effectively resist heat, a drainage hole helps drain water to prevent rust.
More information #ad
Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal. Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaustNOTE: Professional installation would be highly recommended.
| Brand | AUTOSAVER88 #ad |
| Manufacturer | AUTOSAVER88 #ad |
| Height | 5 Inches |
| Length | 12 Inches |
| Weight | 2.5 Pounds |
| Width | 3 Inches |
| Part Number | J008 |
| Model | TSET-0007 |
More information #ad
2. peastorm
#adUniversal Performance Resonator Dual Loud Exhaust Tip 3 Inch Inlet for Trucks Car, Peastrom Glasspack 3 Inch Muffler Exhaust Pipe
#adThis product needs welding installation, and professional installation is strongly recommended.
More information #ad
Universal performance mufflers 3" inlet 3" outlet 14" long 4. 3" round body width, as long as your exhaust pipe is 3 inch and have enough space to install, it will be fit. Stainless steel construction provides long-lasting durability, withstands high exhaust temperature.| Brand | peastorm #ad |
| Manufacturer | peastorm #ad |
| Height | 5 Inches |
| Length | 14 Inches |
| Width | 5 Inches |
| Part Number | zd-wx-76 |
| Model | 3 inch |
| Warranty | Manufacturer warranty for 90 days from date of purchase. |
More information #ad
3. AUTOSAVER88
#adAUTOSAVER88 2.5 Inch Inlet Exhaust Tip, 2.5" Inlet 3" Outlet 6" Overall Length Stainless Steel Exhaust Tips Chrome-Plated Finish Tailpipe
#adNot just make it louder: thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds.
More information #ad
Daily maintenance: to make this exhaust tip has a long-life service - Please Sweep away the welding debris, putty, oil, cement, white ash, sand ash regularly to keep the surface clean. Universally compatible with vehicles which exhaust pipes Outer Diameter is 2. 5 inch. We recommend to do above action once a month NOTE: Professional installation would be highly recommended. Notice: please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip 2. 5 inches. Standard dimension: standard 2. 5" x 3" x 6" inlet, outlet, overall length exhaust tip.
| Brand | AUTOSAVER88 #ad |
| Manufacturer | AUTOSAVER88 #ad |
| Height | 3 Inches |
| Length | 6 Inches |
| Weight | 1.2 Pounds |
| Width | 2.5 Inches |
| Part Number | J030 |
| Model | TSET-0026 |
| Warranty | 1 Year Warranty |
More information #ad
4. A-KARCK
#adA-KARCK 12" Overall Length Polishing Bolt On Exhaust Tailpipe Tip Protect Tailpipe, Exhaust Tip 3" Inlet to 5" Outlet
#adMaterial: made of stainless steel to protect the existing tailpipe from corrosion and deformation.
More information #ad
3" id exhaust tip: 3" inlet diameter 5" outlet diameter 12" overall length, universal fits 3 inch outer diameter tailpipe. Appearance: the pure and elegant silver exterior can perfectly decorate your vehicle. Repeatedly polished surface prevents rain erosion.| Brand | A-KARCK #ad |
| Manufacturer | A-KARCK #ad |
| Height | 12 Inches |
| Length | 5 Inches |
| Width | 5 Inches |
| Part Number | New305012RACB |
More information #ad
5. Jinsanity Performance
#adJinsanityPerformance 3 Inch Inlet Exhaust Tip, Bolt-On Design, 3" x 4" x 12" Inches Inside Diameter Chrome-Plated Stainless Steel Exhaust Tip
#adAvoid rusting and deformation from rain, sun and snow. Dimension3 inch inside diameter inlet, 4. 5 inch outside diameter outlet, 9 inch overall length.
More information #ad
Designpolished stainless steel finish, Easy bolt on Installation, no weld or drill needed. Installation& protectionuniversal exhaust, mirror polished surface treatment and Rolled Edge - 20 Degree slant cut, laser engraving JINSANITY PERFORMANCE on the side of the outlet pipe.| Brand | Jinsanity Performance #ad |
| Manufacturer | Jinsanity Performance #ad |
| Part Number | HJ-304012RA |
More information #ad
6. LCGP
#ad4" Outlet, 5" Long, LCGP 3" Inlet Universal Exhaust Tip, Stainless Steel Double Wall Angle Cut
#adMore information #ad
Installation type: Weld-on. Made of high quality T304 stainless steel for long-lasting durability. Professional Installation is recommended. Surface finished:Polished & Tig welding Exhaust Tip.| Brand | LCGP #ad |
| Manufacturer | LCGP #ad |
| Height | 4 Inches |
| Length | 5.5 Inches |
| Width | 4 Inches |
| Part Number | 304005DAC |
More information #ad
7. DC Sports
#adAnd Trucks, Polished Stainless Steel, Sedans, DC Sports EX-1012 Performance Bolt-On Resonated Exhaust Tip with Clamps and Adapters for Universal Fitment on Most Cars
#adMore information #ad
| Brand | DC Sports #ad |
| Manufacturer | DC Sports #ad |
| Height | 9 Inches |
| Length | 4 Inches |
| Width | 4 Inches |
| Part Number | EX-1012 |
| Model | EX-1012 |
More information #ad
8. Tritrust
#ad3 Inch Inlet Bolt on Design- Stainless Steel Car Muffler Tips 3" ID x 4"OD x 8"L, Black Exhaust tip
#adMore information #ad
Bolt-on installation: slide on easily over your existing tailpipe, then secure in place with bolts. Size : inlet diameter 3'' / outlet diameter 4''/ Length 8'' / width 4''. This muffler tips won’t change the function of your car.| Brand | Tritrust #ad |
| Manufacturer | Tritrust #ad |
| Part Number | T00004BK |
More information #ad
9. DC Sports
#adMatte Black Powdercoat, Sedans, DC Sports EX-1012B Performance Bolt-On Resonated Muffler Slant Tip with Clamps and Adapters for Fitment on Most Cars, and Trucks
#adMore information #ad
Coated stainless steel Resonated Bolt-On Exhaust Tip- Black. Product dimensions: 2-1/4in inlet X 3-3/4In Outlet X 9In Long. Resonated tips Are To Enhance Sound Output. Cut type: Slant Cut.| Brand | DC Sports #ad |
| Manufacturer | DC Sports #ad |
| Height | 2.25 Inches |
| Length | 9 Inches |
| Weight | 1.8 Pounds |
| Width | 3.75 Inches |
| Part Number | EX-1012B |
| Model | EX-1012B |
More information #ad
10. NETAMI
#ad3" Inlet/4" Outlet, 3" Inlet NETAMI Carbon Fiber Stainless steel Exhaust Tip 3" Inlet Blue
#adMore information #ad
Real glossy carbon fiber with UV protection will never Fade or Rust. Made with high quality stainless steel with carbon Fiber finished. Fit type: Universal Fit. One year parts warranty.| Brand | NETAMI #ad |
| Manufacturer | NETAMI #ad |
| Height | 4 Inches |
| Length | 10 Inches |
| Weight | 1.4 Pounds |
| Width | 4 Inches |
| Part Number | NT-3052 |
| Model | NT-3052 |
| Warranty | Parts |
More information #ad
