As an Amazon Associate I earn from qualifying purchases.
1. MUYI #ad
MUYI 2 Set Standard Blade Fuse Holder 14 Gauge Waterproof Pigtail Inline Fuse Holder with 20A ATC Fuses #adMUYI #ad
- 14 awg thick red pigtail wire allow you to cut and splice it into any project, Wire length: 30cm/12inches. Not easy to fall off or let water in. Package included: 2 x standard blade Fuse Holder and 2 X 20A Standard Blade Fuse.
Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. Suitable for 1a, 15a, 5a, 3a, 7.5a, 10a, atv, truck, ideal for car, 2a, 20A, boat etc. In-line fuse holder for standard blade fuses, Fuse holder dimension: 41x35x15mm.
2. RECOIL #ad
Recoil FH12-10 10 Pack ATC/ATO Inline 12AWG Fuse Holder with 10pcs 15A & 20A Fuses #adRECOIL #ad
- Fuse holders wire is made of pure Oxygen Free Copper as conductor to ensure its excellent electrical conductivity. Atc/ato in-line fuseholder. Package include: 10 x inline holder, 10 x 15A fuse, 10 x 20A fuse.
Tight-fitting waterproof lid for moisture-proof, waterproof performance and dust proof. Heavy duty 12awg red power wire, Protecting circuits and electrical equipment.
3. Nilight #ad
Nilight, 50029R 120 Pcs Standard Blade Fuse 5A/7.5A/10A/15A/20A/25A/30A AMP Assorted Set with 10 Pack 14AWG ATC/ATO Inline Fuse Holder, 2 Years Warranty #adNilight #ad
- 3 inch. 74 x0 . 1 mm. Protect your car and your electrical device from short circuit, overload etc. Standard blade fuse: 075 x01 × 18. Easy to use: turn one fuse slot into two while providing protection for both circuits.
5 × 5. Package include: 10 x 14awg atc/ato inline Fuse Holder and 120 PCs standard blade fuse+Puller. It's no doubt that this is an inline fuse holder extremely safe and reliable.
Safety protection: unique design of the dual slot tight-fitting waterproof lid to enhance moisture-proof and waterproof performance. Suitable fuses: fits for 1a, 20a, 7. 5a, 2a, 10a, 4a, 15a, 5a, 25a, 3a, 30a atc/ato blade fuse of 19. Fuse type: blade. Material: Zn alloy/Plastic. 10 pack in-line fuse holder: heavy duty 14 gauge AWG red color wire, great look and added protection to the circuit.
|Warranty||2 Years Warranty|
4. STETION #ad
STETION Car Audio 20 Amp Resettable Fuse Circuit Breaker Car Protect for Audio System Fuse 12-24V DC for Car Audio Amps Overload Protection Fuse 20A #adSTETION #ad
- Characteristic- two modes, after the circuit is repaired, Current overload disconnection and manual disconnection, the switch turns ON and the fuse holder can be used again.
Quality control- car audio fuse holders 100% pass professional electrical performance test and aging test, there is no stuck state, the switch button is smooth, the switch button has passed 100% full inspection, please rest assured to buy. Features- always protect the safety of automotive electronics, Prevent car currents from being too high and damage automotive electronic equipment.
Specification- car audio fuse holders voltage 12-24v dc, Ampere 20A 30A 40A 50A 60A 80A 100A. Worry-free warranty - an easy replacement or full refund is available for you if you are not happy with our product. Click to contact seller STETION, We will refund you or exchange it for free.
5. AutoEC #ad
Standard Blade Inline ATC ATO Waterproof Fuse Holder with 20A ATC Fuses 1 Set, AutoEC 16AWG 20A 12v Fuse Holder #adAutoEC #ad
- Condition: 100% Brand New. Hight Quality. Waterproof your electrical connection using this fuse holder. Package included: 1 x standard Blade Fuse holders and 2 X Standard Blade Fuse. Damp proof and waterproof.
6. MUYI #ad
2 Pack MUYI Inline Fuse Holder 10 Gauge Fuse holders 12v Waterproof Pigtail Blade Fuse Relay with 40AMP ATC Fuses, 10ga Fuse Holder #adMUYI #ad
- Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm. Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. Not easy to fall off or let water in.
10 awg thick red pigtail wire allow you to splice it into any project. Inline fuse holder for standard blade fuses, 20a, suitable for 1a, 7.5a, 5a, 15a, 10a, 2a, 30a, 3a, 40a, ideal for car truck trailer atv boat marine. Package included: 2 x standard blade Fuse Holder and 2 X 40Amp Standard Blade Fuse.
7. UPEOR #ad
Car Audio Inline Circuit Fuse Breaker, 12V DC 20A/30A/50A/60A/80A/100A Reset Circuit Breaker Fuse Holders for System Protection 20A #adUPEOR #ad
- Ampere range: 150 amp car audio inline fuse circuit breaker/car stereo fuse Block 12V-24V DC. Protection: prevents excessive current and overload protection for Amps, Audio electronics, audio/video systems and accessories in car, boat, marine vehicles and bikes, stops power surges from damaging your amps.
Protection: prevents excessive current and overload protection for Amps, audio/video systems and accessories in car, marine vehicles and bikes, Audio electronics, boat, stops power surges from damaging your amps.
Button on circuit breaker can act as a master disconnect for circuits.
Please contact us without any heastitation if you have any problems. 20a/30a/40a/50a/60a/80a/100a other specifications are available. Warranty: backed by 45 days money-back and 12-month worry-free warranty. Structure: visible reset lever shows open condition, unique push button reset can also be used as a kill switch.
8. RKURCK #ad
RKURCK 20 Amp Circuit Breaker Manual Reset Inline Fuse Inverter for Car Marine Trolling Motors Boat ATV Audio Solar Inverter System Protection 12V-24V DC 20 Amp Fuse Holder, 20A #adRKURCK #ad
- Current: 1a-20a, voltage: 12V-24V DC. Stops power surges from damaging your amps. Size: 98mm l x 43mm W x 40mm H. Use for: car audio video system, marine, boat, bike use.
Current: 1a-30a, voltage: 12V-24V DC. Model:car audio inline breaker circuit Fuse 12V-24V DC 20A For Choose. Mount on panel or firewall.
9. Tuijodaix #ad
Stereo Switch and Solar Inverter System 2 Pack, 20A Audio Inline Circuit Breaker Reset Fuse PowMr Reset ，0-8 Gauge 20 amp Fuse Holder with Manual Reset for 12V-24V DC Car Audio #adTuijodaix #ad
- Save your money to Replacing inline fuse holder. Unique push button reset and Save Your Money to Replacing Fuses. Ampere range : 20 amp car audio inline Circuit Breaker/Disconnect Fuse Holder 12V-24V DC.
Stops power surges from damaging Your Amps, Protects Your Trolling Motor From Electrical Damage. Material : Plastic and metal. Easy to use and durable, mount on panel or firewall.
10. ZOOKOTO #ad
ZOOKOTO Inline Fuse Holder,14 AWG Gauge Wire Car Auto Blade Fuse Waterproof with 20 AMP Fuse #adZOOKOTO #ad
- With 14awg red insulated wire, 32v, rated current: 20A, DC 6V/12V/24V. In-line fuse holder for blade fuses, Water resistant cap, High Quality Product. Access to the fuse is by means of a snap-fit lid on the top of the holder, Implementation of standards: National Standard.
Damp proof and waterproof, include 20A Fuse. With cap design waterproof your electrical connection using this fuse holder.