Top 10 10AN Straight Fitting – Automotive Replacement Fuel System Fittings
As an Amazon Associate I earn from qualifying purchases.
EVIL ENERGY #ad - Due to the high-quality material which makes push lock fitting worked last for long. Push lock fittings are easy to use and don't require special equipment. Designed for smooth flow, the hose end fittings are made of high-quality aluminum alloy material for strong strength.
We normally recommend a bit of assembly lube to make it easier. Connect engine with air filter, the engine with radiator system, automobile air conditioning system, Nylon Braided Hose, oil cooler etc. Our push lock fitting is only work with Rubber Push-Lock oil hose.
Application- evil energy push lock fitting is widely used in oil/ water/ fluid/ airline etc. Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Environmental friendly- push lock fitting can be reused and recycle if you do not want them to stay in the original place. They are not compatible with PTFE Hose, or Stainless Steel Braided Hose. Polished and anodized surface provide the bright appearance and corrosion protection.
HiwowSport #ad - Material of 6061 Aluminum. Weld-free & high quality. Two same shapes in one parcel. 0 degree, 10AN. Easy install - easy install onto any braided hose with a vice and wrench. Will work with all an braided hoses. Not compatible for use with rubber or polytetraflouroethelyene PTFE hoses.
EVIL ENERGY #ad - Anodized finish for great strength and durability. Evil energy provide ptfe hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service.
The ptfe hose end fitting only can be used for PTFE Oil/Fuel Line Hose, more details check on description below. The ptfe hose end fitting can be reused, but please change the olive inserts before you use it again.
Can work with kinds of liquids, water, oil, gas, fuel, ect. Especially for E85 ethanol gasoline. Black anodized for great appearance and anti-corrosion, superior thread strength. The ptfe reusable hose ends are easier to install than cutter-style fittings and more user-friendly. Hose end size: -10an angle: straight. The 10an ptfe fitting is only fit on 10an ptfe fuel lines.
EVIL ENERGY #ad - Our swivel fitting is work with Nylon Braided Hose and Stainless Steel Braided Fuel Hose. We normally recommend a bit of assembly lube to help prevent any galling. Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends.
Swivel fittings are easy to use and don't require special equipment. Application- evil energy swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.
Multi sizes supplied:available in 4 sizes and four angles:4an, 6an, 180 degree. Swivel hose end no installation instructions, 90 degree, 45 degree, 10AN/straight, 8AN, detailed Installation steps look described in detail. Polished and anodized surface provides the bright appearance and corrosion protection. They are not compatible with ptfE Hose, E85, Fuel hose, Clutch hose, Rubber Hose . Connect oil gas line, turbo line etc.
EVIL ENERGY #ad - 10an male fitting fit all oil coole / fuel tank / fuel pump/fluid Line. The straight male 10AN union can use for gasoline and alcohol-based fuels.
EVIL ENERGY #ad - Max working Pressure: 1000psi. The female an10 swivel fittings are made of lightweight aluminum alloy 6061-t6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength.
We normally recommend a bit of assembly lube to help prevent any galling. These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly. Swivel hose end can be reused and recycle if you do not want them to stay in the original place.
Our swivel fitting is work with nylon braided fuel hose. 10an swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Can be suitable for competition applications where reduced weight is needed. Evil energy provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service. Swivel fittings are easy to use and don't require special equipment.
Every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment. Whether they're manifolds superchargers fuel injection systems cylinder heads nitrous systems or carburetors you can rest assured that the final product was directly influenced by the passion for performance that is an integral part of our Edelbrock team.
Micro Traders #ad - Fitting style: Fast Flow Reusable swivel. Made from high quality Light weight Alloy Aluminum. Designed for smooth Flow, Easy Assembly & Longer Life. Application: only suit for PTFE fuel hose. Adapter Attachment: Female threads.
1. EVIL ENERGY
#adEVIL ENERGY 10AN Straight Push Lock Hose Fitting End Black
#adWe normally recommend a bit of assembly lube to make it easier. Connect engine with air filter, the engine with radiator system, automobile air conditioning system, Nylon Braided Hose, oil cooler etc. Our push lock fitting is only work with Rubber Push-Lock oil hose.
More information #ad
Multi sizes supplied:available in 3 sizes and four angles:6an, 45 degree, 10an/straight, 8an, 90 degree, 180 degree. Push lock fitting no installation instructions, detailed Installation steps look described in detail. Application- evil energy push lock fitting is widely used in oil/ water/ fluid/ airline etc. Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Environmental friendly- push lock fitting can be reused and recycle if you do not want them to stay in the original place. They are not compatible with PTFE Hose, or Stainless Steel Braided Hose. Polished and anodized surface provide the bright appearance and corrosion protection.
| Brand | EVIL ENERGY #ad |
| Manufacturer | Speedwow Tuning #ad |
| Part Number | CS00718D0 |
More information #ad
2. HiwowSport
#adHIWOWSPORT 2PCS 10 AN Oil Fuel Hose Fitting End Straight 0 Degree Black 10AN-0 Degree
#adMore information #ad
| Brand | HiwowSport #ad |
| Manufacturer | HIWOWSPORT #ad |
| Part Number | US-Fuel Hose-Stra |
More information #ad
3. EVIL ENERGY
#adEVIL ENERGY AN10 10AN Straight PTFE E85 Hose End Only for PTFE Oil Fuel Line Fitting Adapter Black
#adThe ptfe hose end fitting only can be used for PTFE Oil/Fuel Line Hose, more details check on description below. The ptfe hose end fitting can be reused, but please change the olive inserts before you use it again.
More information #ad
Installation - insert the ptfe hose end fitting into the ptfe hose by holding the hose and pushing the hose end nipple into the tube with a combined twisting pushing action. Can work with kinds of liquids, water, oil, gas, fuel, ect. Especially for E85 ethanol gasoline. Black anodized for great appearance and anti-corrosion, superior thread strength. The ptfe reusable hose ends are easier to install than cutter-style fittings and more user-friendly. Hose end size: -10an angle: straight. The 10an ptfe fitting is only fit on 10an ptfe fuel lines.
| Brand | EVIL ENERGY #ad |
| Manufacturer | Speedwow Tuning #ad |
| Part Number | CS00555D0 |
More information #ad
4. EVIL ENERGY
#adEVIL ENERGY 10AN Straight Swivel Hose End Fitting for braided fuel line Aluminum Alloy Black&Red
#adSwivel fittings are easy to use and don't require special equipment. Application- evil energy swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.
More information #ad
Environmental friendly- swivel hose end can be reused and recycle if you do not want them to stay in the original place. The hose end fittings are made of high-quality aluminum alloy material for strong strength. Multi sizes supplied:available in 4 sizes and four angles:4an, 6an, 180 degree. Swivel hose end no installation instructions, 90 degree, 45 degree, 10AN/straight, 8AN, detailed Installation steps look described in detail. Polished and anodized surface provides the bright appearance and corrosion protection. They are not compatible with ptfE Hose, E85, Fuel hose, Clutch hose, Rubber Hose . Connect oil gas line, turbo line etc.
| Brand | EVIL ENERGY #ad |
| Manufacturer | Speedwow #ad |
| Part Number | CS00019D0 |
More information #ad
5. Vibrant Performance
#adVibrant 21010 -10AN Straight Hose Fitting
#adVibrant Performance #ad - Model number : 21010 Item package weight : 9. 99 pounds. Package dimension : 12. 94 " l x 7. 94 " w x 6. 59 " h. Country of origin: CHINA.More information #ad
| Brand | Vibrant Performance #ad |
| Manufacturer | Vibrant Performance #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Width | 0 Inches |
| Part Number | 21010 |
| Model | 21010 |
| Warranty | 1YR |
More information #ad
6. EVIL ENERGY
#adEVIL ENERGY 10AN to 10AN Male Coupler Flare Union Adapter Straight Fitting Aluminum Black 2 Pcs
#adMore information #ad
The material of union adapter is lightweight aluminum. Fitting diameter: 10AN male coupler. 10an to 10an union fittings:more area and smoother transitions from the inlet to the outlet.| Brand | EVIL ENERGY #ad |
| Manufacturer | Speedwow Tuning #ad |
| Part Number | CS00581AN10BK-2 |
More information #ad
7. AC PERFORMANCE
#adAC PERFORMANCE 10AN Black Straight Female to -10 AN Aluminum Swivel Hose End Oil Fuel Fitting Connector, AN10 7/8-14 Thread Reusable Equal Tubing Adaptor
#adAC PERFORMANCE #ad - Such as: oil/ fuel/ water/ Fluid with AN -10 Ends. Jic -10 an female sae thread 7/8-14 to AN10 Hose End adaptor, Straight Black. Performance high flow hexagon head precision female AN to an swivel seal reusable hose end.More information #ad
One piece design, no braised etching risk. Universal fit. Made of high quality lightweight 6061-T6 CNC Machined Billet Aluminum Material.| Brand | AC PERFORMANCE #ad |
| Manufacturer | FOURAGE #ad |
| Part Number | E0209-10_SLE |
| Model | E0209-10 |
| Warranty | 1 year quality warranty |
More information #ad
8. EVIL ENERGY
#adEVIL ENERGY 10AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black
#adWe normally recommend a bit of assembly lube to help prevent any galling. These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly. Swivel hose end can be reused and recycle if you do not want them to stay in the original place.
More information #ad
Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Working temperature range: -65℉ to 252℉ （-53℃ to 122℃. Connect oil gas line, clutch hose, braided fuel line, E85, turbo line etc. Our swivel fitting is work with nylon braided fuel hose. 10an swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Can be suitable for competition applications where reduced weight is needed. Evil energy provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service. Swivel fittings are easy to use and don't require special equipment.
| Brand | EVIL ENERGY #ad |
| Manufacturer | Speedwow Tuning #ad |
| Part Number | CS00089D0 |
More information #ad
9. Edelbrock
#adRussell 610040 Red/Blue Anodized Aluminum -10AN Straight Hose End
#adEdelbrock #ad - Fit type: Vehicle Specific. Edelbrock facilities have earned the world recognized ISO 9001 2008 registration for quality. Edelbrock's r&d staff is not only well qualified at their respective positions but they're also automotive enthusiasts who do more than work in the automotive aftermarket-they live it-and it's at that point where understanding the inner workings of a supercharger or an engine EFI system becomes second nature.More information #ad
In a day and age where we are seeing more products sent overseas to be manufactured Edelbrock sees value in the quality control of American manufacturing by American workers and we are proud of our casting and manufacturing facilities. Every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment. Whether they're manifolds superchargers fuel injection systems cylinder heads nitrous systems or carburetors you can rest assured that the final product was directly influenced by the passion for performance that is an integral part of our Edelbrock team.
| Brand | Edelbrock #ad |
| Manufacturer | Edelbrock #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.15 Pounds |
| Width | 0 Inches |
| Part Number | 610040 |
| Model | 610040 |
| Warranty | Edelbrock, LLC shall not be liable for any and all consequential damages occasioned by the breach of any written or implied warranty pertaining to this sale in excess of the purchase price of the product sold. |
More information #ad
10. Micro Traders
#adMicro Traders AN10 AN-10 10AN Straight Fuel Swivel Fitting Hose End Adaptor Oil Fuel Gas 2pcs
#adMore information #ad
| Brand | Micro Traders #ad |
| Manufacturer | Micro Traders #ad |
| Height | 2.76 Inches |
| Length | 1.18 Inches |
| Width | 2.76 Inches |
More information #ad