Top 10 1/4 Inch Fuel Line – Powersports Fuel Lines
As an Amazon Associate I earn from qualifying purchases.

Designed for conveying gasoline, and bio-diesel, diesel, E-85, fuels in mowers tractors snow blowers dirt bikes and just about all small engines. Package includes:9.




Wall thickness is 2. 94mm. Hose clampsmade of 65mn spring Steel, durable and can be reused. Wide applicationfits selected briggs & stratton, kubota engines that use this type filter for motorcycle, Oregon, Craftsman, Kawasaki, Kohler, Stens, Simpson, lawnmower, John Deere, Gravley, Husqvarna, power equipment and small engines ect.
Fuel filterfilter the impurities, dirt, prevent blockage of carburetor, particles in fuel, only allows clean fuel flows in and keep engines at full power. Oil resistant, cold-resistant and ethanol tolerance. Tight clamping force prevents liquid leakage. The dimensions of the various components within the kit are 100% compatible! 3-layer thickened fuel linethe fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer.



Easy to use and install;good to replace it at regular intervals, extra 20 pcs hose clamps could save you a lot time to find proper clamp in local market. Fuel filter length:100mm;with a magnet--help to filter impurities, such as scrap iron, etc;2 Sheet Metal--improve durable and corrosion-resistant.

1. Orange Cycle Parts
#ad
Orange Cycle Parts Blue Polyurethane Fuel Line 1/4" 10' Roll Fuel Line
#adOrange Cycle Parts #ad - High tensile strength; withstands temperatures from -65°F to 220°F without deterioration. High-quality, transparent blue polyurethane line with exceptional chemical resistance including gasoline, kink- and abrasion-resistant, grease and oil.More information #ad
Will not work on fuel injected / Not to be used with fuel over 10% alcohol. X 10 foot length. X 3/8" o. D. 1/4" i. D. Strong, yet flexible and easily processed in assembly operations.Brand | Orange Cycle Parts #ad |
Manufacturer | Aftermarket #ad |
Part Number | OCP-1/4x10 |
Model | OCP-1/4x10--AZ1 |
More information #ad
2. CocoMocart
#ad
Cococart 9.85-Foot Length Stretchy 1/4 Inch ID Fuel Line+20pcs 2/5" ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engines
#adCocoMocart #ad - Fuel line:1/4 inch inside diameter 064 cm and 1/3 inch outside diameter 08cm;hose clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 2/5-inches.Designed for conveying gasoline, and bio-diesel, diesel, E-85, fuels in mowers tractors snow blowers dirt bikes and just about all small engines. Package includes:9.
More information #ad
8 feet3m 1/4" id fuel line, 20 X 2/5" ID Hose Clamps. For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control. The fuel lines are oil resistant, cold-resistant and ethanol tolerance;Custom Extra long 9. 8 foot length 3m can be cut to size for all your applications.Brand | CocoMocart #ad |
Manufacturer | Cococart #ad |
Part Number | CBF020040PN |
Model | 2 |
More information #ad
3. LDR Industries
#ad
LDR 516 F146 ¼ Inch ID Fuel Line for Small Engines 6-Foot Length
#adLDR Industries #ad - American made high quality rubber hose max 60 PSI @ 70 F Max Temperature of 257F/93C. For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control.More information #ad
Inch inside diameter. 64 cm and ½ inch outside diameter 1. 27. Custom extra long 6 foot Length 1. 82 can be cut to size for all your applications. For use in mowers tractors snow blowers dirt bikes and just about all small engines.Brand | LDR Industries #ad |
Manufacturer | LDR Industries #ad |
Height | 8 Inches |
Length | 1.25 Inches |
Width | 9 Inches |
Part Number | 516 JF146 |
More information #ad
4. iRuiZhe
#ad
4AN 10Ft Universal Braided Oil Fuel Line Hose Stainless Steel Nylon for 1/4" Tube Size
#adiRuiZhe #ad - Application for: racing fuel, diesel, fuels with ethanol, alcohol based fuels, pump gas, motor oil & coolant etc. Operating temperature: -40 Degree F to +350 Degree F. Material: innter hose: cpe synthetic rubber The middle layer: 304 stainless steel wire mesh sleeve; The outer layer: High quality braided nylon.More information #ad
Working pressure: 500 psi / 34. 5 bar; burst pressure: 2000 PSI / 138 Bar. Inner diameter: 5. 56 mm 022 inch, outer Diameter: 11. 17 mm 044 inch.Brand | iRuiZhe #ad |
Manufacturer | iRuiZhe #ad |
Part Number | RL0006_CA |
Model | RL0006_CA |
More information #ad
5. theBlueStone
#ad
TheBlueStone 10FT -4AN Nylon Braided Fuel Line Hose for 1/4" Tube Size
#adtheBlueStone #ad - Working temperature: -40°F to +300°F. Working pressure: 500 psi. The fitting adapter for PTFE hose is NOT FIT. Inner diameter: 5. 56 mm 022 inch, outer Diameter: 11. 17 mm 044 inch.More information #ad
Application for: racing fuel, fuels with ethanol, diesel, alcohol based fuels, pump gas, motor oil & coolant etc. Burst pressure: 2000 PSI. Our rubber hose should compatible with rubber fitting adapter. Note: double check the hose size before bidding.Brand | theBlueStone #ad |
Manufacturer | theBlueStone #ad |
Part Number | GCR425 |
More information #ad
6. IZOKEE
#ad
IZOKEE 1/4" Inch ID Fuel Line Set, 2 Meter / 6-Foot ¼ Inch Fuel Line + 2 Pcs 1/4 Inch & 5/16 Inch Fuel Filters + 10 Pcs 2/5" ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engine
#adIZOKEE #ad - 6 foot / 2 m hose can be cut to size for all your applications. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. Upgraded setthe izokee package includes 6 feet 1/4" id fuel line; 2 x 1/4" in-line fuel filters; 10 x 2/5" id hose clamps.Wall thickness is 2. 94mm. Hose clampsmade of 65mn spring Steel, durable and can be reused. Wide applicationfits selected briggs & stratton, kubota engines that use this type filter for motorcycle, Oregon, Craftsman, Kawasaki, Kohler, Stens, Simpson, lawnmower, John Deere, Gravley, Husqvarna, power equipment and small engines ect.
More information #ad
The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Fuel filterfilter the impurities, dirt, prevent blockage of carburetor, particles in fuel, only allows clean fuel flows in and keep engines at full power. Oil resistant, cold-resistant and ethanol tolerance. Tight clamping force prevents liquid leakage. The dimensions of the various components within the kit are 100% compatible! 3-layer thickened fuel linethe fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer.
Brand | IZOKEE #ad |
Manufacturer | IZOKEE #ad |
Part Number | IZKE-FLCF |
Model | IZKE-FLCF |
More information #ad
7. steber
#ad
Fuel Line 1/4" ID NBR Hose 4AN Push on Hose 0.47" OD for Small Engines, 10 feet
#adsteber #ad - Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines. Handles temperature ranges of -40 to +275 degrees F. Id: 1/4 inch, 4 an nbr liner hose, od: 047 inch / 12mm, 10 feet.More information #ad
Working pressure 2mpa. Burst pressure 6mpa, The Fuel Lines are oil resistant, cold-resistant and ethanol tolerance. Push on / lock hose designed for conveying gasoline, diesel, E-85, trucks, and bio-diesel fuels in cars, buses, etc.Brand | steber #ad |
Manufacturer | steber #ad |
Part Number | BNBRID6-10 |
More information #ad
8. CocoMocart
#ad
CocoMocart 1/4 Inch ID x 6.5 Feet/2m Length NBR/PVC SAE30R6 Fuel Line Hose Tubing with Adjustable Clamps
#adCocoMocart #ad - 1/4 inch inside diameter 064 cm and 2/5 inch outside diameter 1. 0 cm. Designed for conveying gasoline, fuels in Cars, mowers tractors, snow blowers, and bio-diesel, E-85, Buses, Trucks, diesel, dirt bikes and other small engines.More information #ad
Package included: 1* 6. 5 feet fuel line+8* 8-12 mm1/3"-1/2" hose clamp. Reinforced with two spiral polyester and NBR-PVC cover that is oil resistant and withstands high heat, abrasion and ozone found in engine compartments. 6. 5 feet 1/4" id black polyester Reinforced High Pressure Fuel Line.Brand | CocoMocart #ad |
Manufacturer | Cococart #ad |
Part Number | CFL00353PN |
More information #ad
9. CocoMocart
#ad
CocoMocart 10pcs 1/4 Inch X 5/16 Inch Gas Inline Fuel Filters with Magnet+5 Feet/1.5m 1/4" ID Fuel Line+20Pcs 2/5" ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engine
#adCocoMocart #ad - Fit for all outdoor power equipment, 5 feet 1/4" id fuel line, small non fuel injected cars and motorcycles or small Engine. Package includes:10 x 1/4" in-line fuel Filters, 20 X 2/5" ID Hose Clamps.Easy to use and install;good to replace it at regular intervals, extra 20 pcs hose clamps could save you a lot time to find proper clamp in local market. Fuel filter length:100mm;with a magnet--help to filter impurities, such as scrap iron, etc;2 Sheet Metal--improve durable and corrosion-resistant.
More information #ad
Can be used on many small tractors, snowmobiles, lawn mowers, go karts, garden tillers, generators with 1/4" or 5/16" fuel lines. The 1/4 inch fuel lines are oil resistant, cold-resistant and ethanol tolerance;Custom Extra long 5 Foot Length1. 5m can be cut to size for all your applications.Brand | CocoMocart #ad |
Manufacturer | Cococart #ad |
Part Number | CBF020043PN |
More information #ad
10. LDR Industries
#ad
1/4", LDR Industries 516 F145 5' Bag Fuel Line
#adLDR Industries #ad - Ideal for transfer of petroleum products fuel lines for small engines. Convenient 5-Feet length. Abrasion resistant. Made in usa goodYear / Continental Hose. Use hose barbs and clamps.More information #ad
Brand | LDR Industries #ad |
Manufacturer | LDR Industries #ad |
Height | 9 Inches |
Length | 8 Inches |
Width | 1.25 Inches |
Part Number | 516 F145 |
Model | 516 F145 |
More information #ad