Rok Hardware Ratchet Headrest Fitting for Beds, Desk Lids, Drafting Tables, and Drawing Boards, Steel

#ad
#ad
Rok ROKRATCHET #ad - Includes the upper and lower mounting plates. 12 adjustment positions. 220 pounds static load rating. Made of steel zinc finish. Commonly used for beds, desk lids, drafting tables, and drawing boards.

More information about Rok ROKRATCHET #ad

Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 1-1/2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 3' Long Pack of 1

#ad
#ad
S&S Hinges BA1003X36 #ad - This finished hinge is suited for applications such as cabinetry and piano lids where a polished hinge as opposed to a flat finished or unfinished hinge is a priority. Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets.

Stainless steel 304 is corrosion resistant up to 1, 500 degrees F though less resistant to corrosion than stainless steel 316, weldable, and stronger than steel and aluminum. Countersunk holes for convenience when mounting. The range of motion for this hinge is 270 degrees from the folded position. A weldable material, stainless steel 304 is stronger than steel and aluminum.

Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 1-1/2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 3' Long Pack of 1 #ad - Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Stainless steel 304 resists corrosion up to 1, 500 degrees F and is suitable for applications used in corrosive environments, though not as resistant to corrosion as stainless steel 316. The knuckle is the tubular part of the hinge through which the pin passes, and knuckle length is the measurement of an individual section.

The stainless steel 304 continuous hinge has countersunk holes and is suitable for surface-mounted applications requiring uninterrupted support along the full length of the pieces being joined, such as appliance doors, industrial kitchen equipment, and metal storage cabinets. Open width is the dimension from the outer edge of one leaf to the outer edge of the other when the hinge is fully open.

More information about S&S Hinges BA1003X36 #ad


Similar products



Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 2' Long Pack of 1

#ad
#ad
S&S Hinges BA1004X24 #ad - Open width is the dimension from the outer edge of one leaf to the outer edge of the other when the hinge is fully open. The pin runs the length of the hinge holding the leaves together. The bright annealed finish gives this hinge a mirrorlike appearance and offers additional protection against corrosion.

Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, 500 degrees F though less resistant to corrosion than stainless steel 316, weldable, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting. The knuckle is the tubular part of the hinge through which the pin passes, and knuckle length is the measurement of an individual section. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. The range of motion for this hinge is 270 degrees from the folded position.

Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 2' Long Pack of 1 #ad - A weldable material, stainless steel 304 is stronger than steel and aluminum. Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, 500 degrees F though less resistant to corrosion than stainless steel 316, weldable, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting.

More information about S&S Hinges BA1004X24 #ad


Similar products



Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 3' Long Pack of 1

#ad
#ad
S&S Hinges #ad - A weldable material, stainless steel 304 is stronger than steel and aluminum. The knuckle is the tubular part of the hinge through which the pin passes, and knuckle length is the measurement of an individual section. Stainless steel 304 resists corrosion up to 1, 500 degrees F and is suitable for applications used in corrosive environments, though not as resistant to corrosion as stainless steel 316.

Open width is the dimension from the outer edge of one leaf to the outer edge of the other when the hinge is fully open. Continuous hinges, provide support to run the full length of the doors, also called piano hinges, panels, or pieces being joined together. Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets.

Stainless Steel 304 Continuous Hinge with Hole, Bright Annealed Finish, 0.04" Leaf Thickness, 2" Open Width, 5/64" Pin Diameter, 1/2" Knuckle Length, 3' Long Pack of 1 #ad - Stainless steel 304 is corrosion resistant up to 1, 500 degrees F though less resistant to corrosion than stainless steel 316, weldable, and stronger than steel and aluminum. Countersunk holes for convenience when mounting. Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets.

Stainless steel 304 is corrosion resistant up to 1, 500 degrees F though less resistant to corrosion than stainless steel 316, weldable, and stronger than steel and aluminum. Countersunk holes for convenience when mounting. The pin runs the length of the hinge holding the leaves together.

More information about S&S Hinges #ad


Similar products



National Hardware N148-171 V570 Continuous Hinge in Nickel

#ad
#ad
National Hardware N148-171 #ad - Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, 500 degrees F though less resistant to corrosion than stainless steel 316, weldable, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting. Can be cut to desired length. Friction type pin will not fall out. Surface mount for easy installation. Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets.

Stainless steel 304 is corrosion resistant up to 1, 500 degrees F though less resistant to corrosion than stainless steel 316, weldable, and stronger than steel and aluminum. Countersunk holes for convenience when mounting. Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets.

National Hardware N148-171 V570 Continuous Hinge in Nickel #ad - Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum. Countersunk holes for convenience when mounting. From shutter to continuous hinges, specialty projects are easily completed with the breadth of unique hinges offered.

More information about National Hardware N148-171 #ad


Similar products



National Hardware N148-205 V570 Continuous Hinge in Brass

#ad
#ad
National Hardware N148-205 #ad - Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting. Manufactured from cold-rolled steel, with steel pin. Surface mount for easy installation. Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need. Can be cut to desired length. Surface mount for easy installation.

National Hardware N148-205 V570 Continuous Hinge in Brass #ad - Can be cut to desired length. With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Manufactured from cold-rolled steel, with steel pin. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance.

From shutter to continuous hinges, specialty projects are easily completed with the breadth of unique hinges offered.

More information about National Hardware N148-205 #ad


Similar products



HOFFEN 2 Pcs Black Paint Folding Shelf Bench Table Folding Bracket, Powder Coated Short Release Arm

#ad
#ad
BAISEN #ad - Friction type pin will not fall out. Manufactured from cold-rolled steel, with steel pin. Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Equipped with lock for folded table, ray wall mounting for flat mounting and fixing on 25/32 mm radius pipes, and user-friendly lock/unlock.

HOFFEN 2 Pcs Black Paint Folding Shelf Bench Table Folding Bracket, Powder Coated Short Release Arm #ad - . These brackets bolts to the wall and hinges outward to provide an extremely solid support for your bench or table. Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, 500 degrees F though less resistant to corrosion than stainless steel 316, weldable, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting. Bracket with hinge function in one unit Automatically locks when flap is in open position and press lever to release the lock.

More information about BAISEN #ad


Similar products



Adjustable Drafting Table Hardware Hinge for Massage Couch Drawing Board Table Facial Bed , Bronze 2PCS

#ad
#ad
JZH #ad - Manufactured from cold-rolled steel, with steel pin. Black paint metal bracket. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Top arm length : 9 1/4 ''. Can be cut to desired length. 12" reach, 1" thick, Max. Load:300 lb. Specifications: Adjustable levels : 18 Levels.

18 top angle adjustment from flat to 109 degree. No mounting screws included. Sold in pairs. Can be cut to desired length. Perfect for drafting table, drawing board table, massage couch, facial bed, etc. Adjustable hardware has a gravity feed release. Adjustable angle : 109 degree. Package included: 2 x adjustable angle hinges Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets.

Adjustable Drafting Table Hardware Hinge for Massage Couch Drawing Board Table Facial Bed , Bronze 2PCS #ad - Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum. Countersunk holes for convenience when mounting. Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets.

Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum.

More information about JZH #ad


Similar products



Alvin Double-Sided Tape 1 x 25 Feet 2400-C

#ad
#ad
Alvin 2400-C #ad - Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Black paint metal bracket. Build a drawing or drafting table that sets up to your choice of 18 different positions. 18 top angle adjustment from flat to 109 degree. 12" reach, 1" thick, Max. Load:300 lb. Can be cut to desired length.

Friction type pin will not fall out. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Bracket with hinge function in one unit Automatically locks when flap is in open position and press lever to release the lock. Can be cut to desired length. Ideal for mounting repro films where lack of space precludes use of normal adhesive tapes.

Alvin Double-Sided Tape 1 x 25 Feet 2400-C #ad - Manufactured from cold-rolled steel, with steel pin. Open ht 165mm wt 305mm Strong Smooth & Precise Action. Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, 500 degrees F though less resistant to corrosion than stainless steel 316, weldable, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting. Surface mount for easy installation.

More information about Alvin 2400-C #ad


Similar products



Adjustable Drafting Table Hardware

#ad
#ad
Rockler #ad - Can be cut to desired length. Made of rugged heavy duty steel with Bronze finish. Can be cut to desired length. Release at a touch. Double Sided Tape. Build a drawing or drafting table that sets up to your choice of 18 different positions. 12" reach, 1" thick, Max. Load:300 lb. Surface mount for easy installation. 25 feet.

Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum.

Adjustable Drafting Table Hardware #ad - Countersunk holes for convenience when mounting. 18 top angle adjustment from flat to 109 degree. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Hold firmly. Manufactured from cold-rolled steel, with steel pin. No mounting screws included. Sold in pairs.

More information about Rockler #ad


Similar products



National Hardware N265-371 V570 Continuous Hinge in Nickel

#ad
#ad
National Hardware N265-371 #ad - Surface mount for easy installation. Surface-mounted for applications requiring continuous support along the full length of the hinge, industrial kitchen equipment, such as appliance doors, and metal storage cabinets. Stainless steel 304 is corrosion resistant up to 1, weldable, 500 degrees F though less resistant to corrosion than stainless steel 316, and stronger than steel and aluminum.

Countersunk holes for convenience when mounting. 18 top angle adjustment from flat to 109 degree. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need.

National Hardware N265-371 V570 Continuous Hinge in Nickel #ad - Double Sided Tape. Surface mount for easy installation. Build a drawing or drafting table that sets up to your choice of 18 different positions. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance. Bright annealed finish for additional protection against corrosion and a polished, mirrorlike appearance.

Can be cut to desired length. Surface-mounted for applications requiring continuous support along the full length of the hinge, such as appliance doors, industrial kitchen equipment, and metal storage cabinets.

More information about National Hardware N265-371 #ad


Similar products