Pentek PS5-10C Sediment Water Filters

#ad
#ad
Pentek PS5-10C #ad - Spun-bonded polypropylene sediment Water Filter Cartridge Reduces extra-fine dirt, silt, sand, sediment, rust particles and scale particles. Can be used on chlorinated or non-chlorinated water supplies. Designed for purity, bacteria resistance and chemical resistance. Pentek 5 micron sediment filter. Fits in whole house water filter systems.

Standard size cartridge to fit Pentek housings and other manufacturers. Spun fibers form a true gradient density from outer to inner surfaces. The pentek ps5-10c water filters reduce extra-fine dirt, sand, silt, sediment, rust particles and scale particles. The pentek ps5-10c water filter is resistant to chemicals and corrosion.

Pentek PS5-10C Sediment Water Filters #ad - Ps5-10c 5 micron sediment filter. The pentek ps5-10c filter is a 5 micron extra-fine sediment water filter cartridge made of spun bonded-polypropylene. Will not impart taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Polypropylene spun bonded for high sediment retention.

Manufactured from pure 100% polypropylene. Resistant to chemicals and corrosion.

More information about Pentek PS5-10C #ad

Pentek EPM-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 10 Microns

#ad
#ad
Pentair Industries EPM-10 #ad - Nominal filtration rating of 10 microns. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Water filters are used in a wide range of applications, including drinking water purification, and irrigation, swimming pools, industrial processes, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. The filter will reduce free available chlorine FAC at 2 parts per million ppm by at least 90% in up to 3, 000 gallons at a flow rate of 1 gallon per minute gpm.

Pentek EPM-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 10 Microns #ad - This pentek epm-10 carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. This carbon block filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.

Specificationsnominal filtration rating10 micronsInitial pressure drop at 1 gpm1. 5 psichlorine reduction capacity3, 000 gallons at 1 gpmTemperature range40 to 180 degrees F 4. 4 to 82.

More information about Pentair Industries EPM-10 #ad


Similar products



Pentek CBC-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 0.5 Micron

#ad
#ad
Pentair Industries CBC-10 #ad - It will reduce free available chlorine fac at 2 parts per million ppm by at least 90% in up to 20, 000 gallons at a flow rate of 2 gallons per minute gpm. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants.

Bonded pac media with polyolefin wraps and polyethylene netting. This cartridge is made of bonded powdered activated carbon PAC filter media wrapped in polyolefin with polyethylene outer netting. Initial pressure drop of 3. 7 psi at a flow rate of 2 gpm. Initial pressure drop of 1. 5 psi at a flow rate of 1 gpm.

Pentek CBC-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 0.5 Micron #ad - Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine FAC at a concentration of 2 ppm is reduced by at least 90%. H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, adsorption, and microorganisms from water by means of a semipermeable barrier, or biological processes. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the maximum flow rate, the downstream concentration of unwanted chemicals, and the amount of water that can be filtered before the filter must be replaced.

More information about Pentair Industries CBC-10 #ad


Similar products



Pentek GAC-10 Drinking Water Filter 9-3/4" x 2-7/8"

#ad
#ad
Pentair Industries GAC-10 #ad - The pentek-gac-10 cartridge provides effective reduction of chlorine and bad taste and odor from your drinking water. Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water. Bonded pac media with polyolefin wraps and polyethylene netting. Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life.

Initial pressure drop of 3. 7 psi at a flow rate of 2 gpm. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Initial pressure drop of 1. 5 psi at a flow rate of 1 gpm. Nominal filtration rating of 05 micron. Ideal for general-purpose water filtration. Designed for maximum adsorption with post-filter to reduce carbon fines.

Pentek GAC-10 Drinking Water Filter 9-3/4" x 2-7/8" #ad - Drop-in cartridge design allows for quick filter change on most standard 10 inch housings. Nominal filtration rating of 10 microns. The filter cartridge is manufactured to prevent channeling or bypass and maximize contact with the filter media.

More information about Pentair Industries GAC-10 #ad


Similar products



Pentek EP-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 5 Microns

#ad
#ad
Pentair Industries 1/2" 3G Slim Line BSP #ad - The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Initial pressure drop of 1. 5 psi at a flow rate of 1 gpm. This pentek ep-10 carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water.

Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. Nominal filtration rating of 10 microns. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water.

Pentek EP-10 Carbon Block Filter Cartridge, 9-3/4" x 2-7/8", 5 Microns #ad - The performance of filters is measured by the minimum particle size that is blocked, the downstream concentration of unwanted chemicals, the percentage of particles or microorganisms that are removed, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced.

The nitrile butadiene rubber Buna-N gaskets seal the cartridge against the housing sold separately. This cartridge is made of bonded powdered activated carbon PAC filter media wrapped in a polyolefin pre-filter with polyethylene outer netting. Initial pressure drop of 3. 7 psi at a flow rate of 2 gpm.

More information about Pentair Industries 1/2" 3G Slim Line BSP #ad


Similar products



Pentek C1 Carbon Filter Cartridge, 9-3/4" x 2-1/2", 5 Micron

#ad
#ad
Pentair Industries C1 #ad - Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Reduces fine sediment and chlorine taste and odor in residential drinking water. They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization.

Water filters are used in a wide range of applications, industrial processes, including drinking water purification, and irrigation, swimming pools, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water.

Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. Designed for maximum adsorption with post-filter to reduce carbon fines. Bonded pac media with polyolefin wraps and polyethylene netting. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine FAC at a concentration of 2 ppm is reduced by at least 75%.

Pentek C1 Carbon Filter Cartridge, 9-3/4" x 2-1/2", 5 Micron #ad - H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Water filters remove undesirable particles, adsorption, and microorganisms from water by means of a semipermeable barrier, chemicals, or biological processes.

More information about Pentair Industries C1 #ad


Similar products



Pentek PS1-10C Whole House Replacement Sediment Filter Cartridge

#ad
#ad
Pentek PS1-10C #ad - Initial pressure drop of 4 psi at a flow rate of 5 gpm. Nominal filtration rating of 05 micron. Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water. It installs easily, on a regular replacement schedule of about every 3 months. Nominal filtration rating of 5 microns.

Initial pressure drop of 3. 7 psi at a flow rate of 2 gpm. Drop-in cartridge design allows for quick filter change on most standard 10 inch housings. Designed for maximum adsorption with post-filter to reduce carbon fines. Carbon-impregnated cellulose media with polyester backing and netting for strength and dirt-holding capacity.

Pentek PS1-10C Whole House Replacement Sediment Filter Cartridge #ad - Resistant to chemicals and corrosion. Reduces fine sediment and chlorine taste and odor in residential drinking water. The pentek ps1-10c polypropylene sediment filter is a 1 micron ultra-fine filter that provides cleaner water for a variety of applications. Initial pressure drop of 1. 5 psi at a flow rate of 1 gpm.

Nominal filtration rating of 10 microns.

More information about Pentek PS1-10C #ad


Similar products



Pentek WS-10 Water Softener 10”Cartridge, 155319-43

#ad
#ad
Pentek WS-10 #ad - The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. Nominal filtration rating of 05 micron. Reduces fine sediment and chlorine taste and odor in residential drinking water. Maximum temperature of 100 degrees F 37.

8 degrees C. The performance of filters is measured by the minimum particle size that is blocked, the downstream concentration of unwanted chemicals, the percentage of particles or microorganisms that are removed, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced.

Pentek WS-10 Water Softener 10”Cartridge, 155319-43 #ad - Nominal filtration rating of 5 microns. It is made of sodium-based, non-solvent rinsed ion-exchange softening resin that meets Food and Drug Administration standards, and there are polypropylene pre- and post-filters to reduce the possibility of water bypassing the resin. Initial pressure drop of 4 psi at a flow rate of 5 gpm.

Recommended flow rate of 050 gpm. Initial pressure drop of 1. 5 psi at a flow rate of 1 gpm.

More information about Pentek WS-10 #ad


Similar products



Pentek 150539 SW-1 Wrench for Slim Line Housings

#ad
#ad
Pentair Industries 150539 #ad - Bonded pac media with polyolefin pre-filter and polyethylene netting for extended life. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. Drop-in cartridge design allows for quick filter change on most standard 10 inch housings.

Nominal filtration rating of 05 micron. Initial pressure drop of 4 psi at a flow rate of 5 gpm. Carbon-impregnated cellulose media with polyester backing and netting for strength and dirt-holding capacity. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water.

Pentek 150539 SW-1 Wrench for Slim Line Housings #ad - Nominal filtration rating of 5 microns. Temperature range of 40 to 180 degrees F 4. 4 to 82. 2 degrees C. Constructed with true gradient density from outer to inner surfaces.

More information about Pentair Industries 150539 #ad


Similar products



Pentek 151121 OR-38 Buna-N O-ring for Slim Line Housings

#ad
#ad
Pentair Industries OR-38 #ad - Nominal filtration rating of 5 microns. Reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water. Wrench for loosening filter housing sumps. Bonded pac media with polyolefin wraps and polyethylene netting. For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced.

Pentek 151121 OR-38 Buna-N O-ring for Slim Line Housings #ad - Made of strong plastic. Nominal filtration rating of 10 microns. Nominal filtration rating of 05 micron. Constructed with true gradient density from outer to inner surfaces. This o-ring fits pentek slim line filter housings, which are used in various applications, such as drinking water purification, swimming pools, and industrial processes, among others.

Water filters remove undesirable particles, adsorption, and microorganisms from water by means of a semipermeable barrier, chemicals, or biological processes. Carbon-impregnated cellulose media with polyester backing and netting for strength and dirt-holding capacity. Initial pressure drop of 3.

More information about Pentair Industries OR-38 #ad


Similar products