Octave Tool Kit A for 3D Printer

#ad
#ad
Octave #ad - Works with all 3d printer ABS and PLA plastic models. Long lasting hardened steel blades. Used for neatly removing ABS and PLA raft and supports. It is found very useful for afinia, solidoodle, makerGear, CraftBot, UP!, Ultimaker, MakerBot, PrintrBot, Raise3D, Reprap, and other 3D printers users. Long lasting hardened steel blades.

5 shapes for working on a variety of corners and curves. Used for neatly removing ABS and PLA raft and supports. 5 versatile cutting Tools Used for removing plastic and wood raft and support. Comfortable grip handle. Comfortable grip handles. 5 shapes for working on a variety of corners and curves. Works with all 3d printer abs and PLA plastic models, as well as many other common materials used for 3D printing.

More information about Octave #ad

Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version

#ad
#ad
REPTOR #ad - Are you looking for a 3d print removal toolset with solid, rounded blades easier on your fingers, more delicate objects? durable comfort handles with grips designed for a firm hold that feel good in the hand and look stylish too? Safe, twisting or turning after use? Hardened stainless steel blades that are optimally flexible without being too flimsy and/or getting scratched and gouged by the print bed surface due to their softness? A knife tool with a sharpened front edge flat bottom for getting under even the most-adhered prints with ease? Ability to reach into the back under larger parts, sweep across and lever them off, riveted handles that won't come loose and start spinning, as well as handle smaller, prints and printer surface? REPTOR 3D Print Removal Tools have been designed with all these aspects in mind.

These tools are not your average repurposed painters putty knives with cramp rings that come loose or fall apart before long when used to remove 3D prints! This REPTOR toolset is designed to get even the most stubborn prints off the bed without distorting them or damaging the print bed surface. B>essential addition to your 3d printer accessories; No more putty knives to remove prints.

Premium 3D Print Removal Tool Kit - Durable 3D Printer Tools with Sturdy Comfort Grips, Sharp and Hardened Blades for Easy Separation of Prints, Knife and Spatula Set of 2 - Enhanced Version #ad - They are the perfect duo - practical and durable, rigid construction; Solid rivets keep the blades in place, yet comfortable and stylish! Get yours now! B>durable, no more repurposed artist palette spatulas with spinning, twisting and turning cramp rings!. Long knife with a beveled front edge; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying.

Stiff, safer rounded edges, hardened stainless steel blades; Flexible but not too thin or flimsy, work well with different size objects without damaging them. B>stylish and useful; the smaller offset spatula has a black ergonomic rubber comfort grip, the knife has a big thick wood handle suitable for larger parts.

More information about REPTOR #ad


Similar products



Foreasy 3D Printer Tool 3D Print Removal Tool Enhanced Version Set of 2

#ad
#ad
HONGKONG YIZHI TECHNOLOGY LIMITED FEHE030 #ad - B>essential addition to your 3d printer accessories; No more putty knives to remove prints. This 3d print removal tool can help you easy get the prints off from the print bed. Flexible blade Size: Small 1. 96 * 09 in ; long 4. 52 * 059 in very thin blade, work well suitable size, more flexible this 3d print removal tool can help you easy get the prints off from the print bed A necessary tool set in your 3D printer tool kit, The long ones are useful for releasing larger part and the small one is useful when you want to apply force to penetrate below the 3D part B>durable, no more repurposed artist palette spatulas with spinning, rigid construction; Solid rivets keep the blades in place, twisting and turning cramp rings!.

Long knife with a beveled front edge; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying. Suitable size, More Flexible. Doubles as a leveling tool to scrape off stuck-on plastic from the print bed. Very thin blade, Work well. Stiff, safer rounded edges, hardened stainless steel blades; Flexible but not too thin or flimsy, work well with different size objects without damaging them.

Foreasy 3D Printer Tool 3D Print Removal Tool Enhanced Version Set of 2 #ad - B>stylish and useful; the smaller offset spatula has a black ergonomic rubber comfort grip, the knife has a big thick wood handle suitable for larger parts. Flexible blade size: small 1. 96 * 0

More information about HONGKONG YIZHI TECHNOLOGY LIMITED FEHE030 #ad


Similar products



Dremel PLA 3D Printer Filament, 1.75 mm Diameter, 0.5 kg Spool Weight, Black

#ad
#ad
Dremel DF02-01 #ad - Flexible blade size: small 1. 96 * 09 in ; long 4. 52 * 059 in. Dremel model df02-01dremel pla filament has been designed and tested to work with the Dremel 3D Idea Builder and is the best filament to match your Dremel 3D Printer. Very thin blade, Work well. Stiff, safer rounded edges, hardened stainless steel blades; Flexible but not too thin or flimsy, work well with different size objects without damaging them.

B>stylish and useful; the smaller offset spatula has a black ergonomic rubber comfort grip, the knife has a big thick wood handle suitable for larger parts. For best results, store filament in a dry environment and at room temperature: 60°- 85° FSpecifications: Material: PLADiameter: 1. 75mm b>durable, no more repurposed artist palette spatulas with spinning, rigid construction; Solid rivets keep the blades in place, twisting and turning cramp rings!.

Dremel PLA 3D Printer Filament, 1.75 mm Diameter, 0.5 kg Spool Weight, Black #ad - Long knife with a beveled front edge; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying. This 3d print removal tool can help you easy get the prints off from the print bed. Yields will vary based on quality and fill settings for each model.

Manufactured and tested to provide smooth and consistent building. Doubles as a leveling tool to scrape off stuck-on plastic from the print bed.

More information about Dremel DF02-01 #ad


Similar products



3D Printer Nozzle Cleaning Kit - Stainless Steel Nozzle Cleaning Tool Kit - Alternative for 0.4mm Drill Bits for 3D Printer - 0.4mm Needles and Tweezers Toolkit - Set of 11

#ad
#ad
Reptor . #ad - Comes in a hard plastic tube for convenient storage. B>essential addition to your 3d printer accessories; No more putty knives to remove prints. Flexible blade size: small 1. 96 * 09 in ; long 4. 52 * 059 in. Black color: 1. 75mm pla Filament. B>durable, rigid construction; Solid rivets keep the blades in place, no more repurposed artist palette spatulas with spinning, twisting and turning cramp rings!.

Long knife with a beveled front edge; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying. This 3d print removal tool can help you easy get the prints off from the print bed. B>handy, safe and stylish container; All of the items come in a neat plastic tube with a screw lid to keep them safely together.

3D Printer Nozzle Cleaning Kit - Stainless Steel Nozzle Cleaning Tool Kit - Alternative for 0.4mm Drill Bits for 3D Printer - 0.4mm Needles and Tweezers Toolkit - Set of 11 #ad - Dremel pla filament is plant-based and recyclable. Very thin blade, Work well. Stiff, hardened stainless steel blades; Flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them. B>stylish and useful; the smaller offset spatula has a black ergonomic rubber comfort grip, the knife has a big thick wood handle suitable for larger parts.

For use with all Dremel 3D printers sold separately. Tweezers and 10pcs of 0

More information about Reptor . #ad


Similar products



3D Print Removal Tool

#ad
#ad
ToyBuilder Labs #ad - Wiggle the blade loose and repeat. If you have been tramming leveling your heated print bed with a piece of paper, your fingers will thank you! The thicker neck is useful for removing rafts and for trimming off supports. For use with all Dremel 3D printers sold separately. Manufactured and tested to provide smooth and consistent building.

B>anti-static, non-magnetic curved Precision Tweezers; 3D printing tweezers great for nozzle maintenance and cleaning excess support material. A great tool to go with your 3d printer -- the long, flexible blade is rounded, making it safer for kids, effective with large printed items, and minimizes damage to the printing surface.

3D Print Removal Tool #ad - The thin blade is a convenient feeler gauge for setting a consistent gap between the nozzle and print bed. Tilting or twisting the blade slightly will help speed up the lifting of the print. The idea is to have the print stick firmly to the bed during printing, but still be removable with the tool. Doubles as a leveling tool to scrape off stuck-on plastic from the print bed.

If you are left-handed and starting from the left, twist the tool clockwise. If you cannot get the blade under the print to start, bring the left edge of the tool against a right-side corner of the print and twist the handle clockwise. When tilting the blade, twist the handle counter-clockwise if you're working from the right side of the print.

Rounded edge is safer and less likely to tear print bed tape.

More information about ToyBuilder Labs #ad


Similar products



Needle File Set HIGHEST QUALITY 6 PIECE SET Hardened Alloy Strength Steel - Mini Needle File Set Includes Flat, Flat Warding, Square, Triangular, Round, and Half-Round File.

#ad
#ad
Tarvol FBA_TAR-1032046 #ad - Rounded edge is safer and less likely to tear print bed tape. Speeds removal of parts from print bed. Useful to pop prints off the bed, and to scrape off stuck-on plastic. An essential addition to your 3D Printer Tool Kit. Needle file set includes - flat file, Round File, half Round File, Flat Warding File, Triangular File, and Square File.

Soft rubberized handle - comfortable Non-Slip Rubber Grips, Keeps a Firm Hold Even in Wet Conditions. Each file is crafted from alloy steel - High Carbon Steel Ensures Longevity and Strength. 100% manufacturer money back guarantee - Tarvol Guarantees All of It's Products and Tools for Life! Manufactured and tested to provide smooth and consistent building.

Needle File Set HIGHEST QUALITY 6 PIECE SET Hardened Alloy Strength Steel - Mini Needle File Set Includes Flat, Flat Warding, Square, Triangular, Round, and Half-Round File. #ad - Doubles as a leveling tool to scrape off stuck-on plastic from the print bed. Suitable size, More Flexible. Very thin blade, Work well. B> long-lasting kit for several purposes; Remove excess plastic and clear jams with high precision, also great for general maintenance of the heatsink section. 120 mm / 4. 5 inch long flexible blade helps to reach underneath large prints.

B>10 pcs of 0

More information about Tarvol FBA_TAR-1032046 #ad


Similar products



HEATED 3D PRINT FINISHING TOOL with 4 specially coated interchangeable tips designed to FINISH, REPAIR and MODIFY 3D printed parts.

#ad
#ad
MODIFI3D MOD3D-1 #ad - B>essential addition to your 3d printer accessories; No more putty knives to remove prints. B>10 pcs of 040mm diameter flexible stainless steel needles; Ideal for gentle maintenance of your nozzles and hard to reach places like the feed gears. Maximum temperature of 420-450ºc 788-842ºf b>durable, rigid construction; Solid rivets keep the blades in place, no more repurposed artist palette spatulas with spinning, twisting and turning cramp rings!.

Long knife with a beveled front edge; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying. Flexible blade size: small 1. 96 * 09 in ; long 4. 52 * 059 in. Usb 2. 0/3. 0 powered, rapid heat up 15 secs, fast cool down 30 secs, Sleep mode.4 interchangeable tips - Needle, knife, scoop and point tips.

HEATED 3D PRINT FINISHING TOOL with 4 specially coated interchangeable tips designed to FINISH, REPAIR and MODIFY 3D printed parts. #ad - Removing support material can sometimes be a pain and what if you need to modify the part after printing? You won't want to print the whole thing again if it can be avoided! .

More information about MODIFI3D MOD3D-1 #ad


Similar products



Dremel 3D Printing BT20-01 Build Sheets Pack of 3

#ad
#ad
Dremel BT20-01 #ad - For use with all Dremel 3D printers sold separately. The build tape surface is engineered to allow the filament to easily stick to the tape while printing, but also to allow for easy removal once your print is finished. B>essential addition to your 3d printer accessories; No more putty knives to remove prints.

100% manufacturer money back guarantee - Tarvol Guarantees All of It's Products and Tools for Life! Black color: 1. 75mm pla Filament. B>handy, safe and stylish container; All of the items come in a neat plastic tube with a screw lid to keep them safely together. A necessary tool set in your 3d printer tool kit, The long ones are useful for releasing larger part and the small one is useful when you want to apply force to penetrate below the 3D part.

Dremel 3D Printing BT20-01 Build Sheets Pack of 3 #ad - Stiff, hardened stainless steel blades; Flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them. B>stylish and useful; the smaller offset spatula has a black ergonomic rubber comfort grip, the knife has a big thick wood handle suitable for larger parts.

Special coating to prevent sticking. The pen like form of makes it very comfortable to use and extremely easy to control. Touch switch, indicator Light, simple & easy to use, light weight & compact, stand included. See below full description below for full info and technical spec.

More information about Dremel BT20-01 #ad


Similar products



BuildTak BT30185 Spatula

#ad
#ad
Ideal Jacobs Corp. BT30185 #ad - Suitable size, More Flexible. B>anti-static, non-magnetic curved Precision Tweezers; 3D printing tweezers great for nozzle maintenance and cleaning excess support material. Rounded edge is safer and less likely to tear print bed tape. Speeds removal of parts from print bed. Useful to pop prints off the bed, and to scrape off stuck-on plastic.

An essential addition to your 3D Printer Tool Kit. Needle file set includes - flat file, Triangular File, Round File, half Round File, Flat Warding File, and Square File. Soft rubberized handle - comfortable Non-Slip Rubber Grips, Keeps a Firm Hold Even in Wet Conditions. Each file is crafted from alloy steel - High Carbon Steel Ensures Longevity and Strength.

BuildTak BT30185 Spatula #ad - This awesome new tool features a stainless steel blade with a thin yet rigid front edge for getting under prints. This 3d print removal tool can help you easy get the prints off from the print bed. B>great value: sharp quality tweezers and 10pcs of 040mm nozzle cleaning needles packed in one safe container!

Dremel offers a wide array of vibrant and dynamic colors to expand your creativity. Black color: 1. 75mm pla Filament.

More information about Ideal Jacobs Corp. BT30185 #ad


Similar products



Kamo 5PCS 0.4mm Drill Bits for 3D MakerBot Printer Nozzle Cleaning Kit

#ad
#ad
Kamo #ad - Rounded edge is safer and less likely to tear print bed tape. Speeds removal of parts from print bed. Useful to pop prints off the bed, and to scrape off stuck-on plastic. An essential addition to your 3D Printer Tool Kit. Needle file set includes - flat file, Round File, Triangular File, half Round File, Flat Warding File, and Square File.

Soft rubberized handle - comfortable Non-Slip Rubber Grips, Keeps a Firm Hold Even in Wet Conditions. Each file is crafted from alloy steel - High Carbon Steel Ensures Longevity and Strength. Manufactured and tested to provide smooth and consistent building. For use with all Dremel 3D printers sold separately.

Kamo 5PCS 0.4mm Drill Bits for 3D MakerBot Printer Nozzle Cleaning Kit #ad - B>great value: sharp quality tweezers and 10pcs of 040mm nozzle cleaning needles packed in one safe container! Flexible blade size: small 1. 96 * 09 in ; long 4. 52 * 059 in. Please note: kamo is a registered trademark and authorized seller in USA, plese check carefully before you buy. Don't use the drill to clean until the nozzle is heated to above 200 degrees.

More information about Kamo #ad


Similar products