Neiko 00236A 3/4” Drive Impact Extension Bar, Cr-Mo Steel | 3-Piece Set | 4”, 6”, 10”

#ad
#ad
Ridgerock Tools Inc. 00236A #ad - 3/4 in. Extension Bar. 3/4 in. Spring-loaded ball at male end retains sockets securely and prevents them from dropping. Extension Bar; 1-pc. Set includes 1pc each of 3/4 inch Drive 4", 6" and 10" extension bar. Ball hole at drive end locks onto drive tang of impact tools. Premium impact grade chrome molybdenum steel construction with protective black finish for durability.

Ideally use with impact wrenches and extends access to hard-to-reach fasteners in tight spots, specially for trucks and tractors. Dr x 4 in. 3/4 in. Made of the highest quality chrome vanadium steel, each piece undergoes a precise heat treating process, hardening and strengthening it for use with impact wrenches and drivers.

Neiko 00236A 3/4” Drive Impact Extension Bar, Cr-Mo Steel | 3-Piece Set | 4”, 6”, 10” #ad - Dr x 6 in. Set includes: 1-pc. Extension Bar; 1-pc. Dr x 10 in. Black oxide finish absorbs and holds a small amount of oil, preventing rust and corrosion.

More information about Ridgerock Tools Inc. 00236A #ad

Neiko 02461A 3/4" Drive Deep Impact Socket Set with Carrying Case, 8 Piece, CR-V Steel, 1-1-1/2"

#ad
#ad
Ridgerock Tools Inc. 02461A #ad - Wide range of socket sizes to fit multiple applications including eight common SAE socket sizes 1, 1-1/16, 1-5/16, 1-1/4, 1-7/16, 1-3/8, 1-1/8, 1-1/2 inch. High-contrast visibility permanent laser etched size markings are easy-to-read in low light for easy retrieval and identification. Rugged case keeps everything organized for neat, efficient storage and makes it easy to carry to the job.

Deep broach offers the length to reach over threaded shafts and into recesses. From trucks and tractors to heavy equipment and large machinery, big service and repair jobs need the 3/4-Inch Drive Deep Impact Socket Set. High-torque, 6-point design contacts and grips the stronger flat sides of fastener head, not the weaker corners, to prevent stripping or round-off under extreme stress.

Set includes: 8-piece 3/4-inch drive impact sockets sae: 1, 1-5/16, 1-1/8, 1-3/8, set of 8 high-torque, 1-1/4, 1-7/16, 1-1/16, 1-1/2 inch; Complete with storage case Exclusively designed for use with impact wrenches, 6-point SAE sockets with ¾" drive to remove tough nuts and bolts fasteners. A durable black phosphate finish protects from rust and corrosion.

Neiko 02461A 3/4" Drive Deep Impact Socket Set with Carrying Case, 8 Piece, CR-V Steel, 1-1-1/2" #ad - Extra large, high-contrast size markings are permanently laser etched onto each socket, making size selection quick and easy, even in low light. Unique design grips the flat sides of fasteners rather than the corners to offer security and prevent stripping/ rounding off of bolts. Precisely machined, heat treated black chrome vanadium steel with a corrosion resistant black phosphate coating provides excellent durability and strength with every impact movement.

More information about Ridgerock Tools Inc. 02461A #ad


Similar products



Neiko 30223A Impact Adapter and Reducer Set, 8 Piece | Cr-V | SAE

#ad
#ad
Ridgerock Tools Inc. 30223A #ad - Includes: 3/8" to 1/4" reducer, 3/4" to 1/2" reducer, 1/4" to 3/8" adapter, 1" to 3/4" reducer, 3/8" to 1/2" adapter, 1/2" to 3/8" reducer, 1/2" to 3/4" adapter, 3/4" to 1" adapter. M x 1/2 in. Ball detent securely holds sockets on the coupler. Allows greater flexibility for sockets and drive tools and maximizes the versatility of ratchets and sockets.

A complete drive impact socket adapter and reducer set with hard-to-find conversions; eliminates the need for multiple impact wrenches. Made of the highest quality chrome vanadium steel, each piece undergoes a precise heat treating process, hardening and strengthening it for use with impact wrenches and drivers.

Neiko 30223A Impact Adapter and Reducer Set, 8 Piece | Cr-V | SAE #ad - Unique design grips the flat sides of fasteners rather than the corners to offer security and prevent stripping/ rounding off of bolts. They create replacements for lost or broken sockets, expand incomplete socket sets, and Allows greater flexibility for all sockets and drive tools. F; 4-pc. F, 3/8 in. M x 1/4 in.

F, 1/2 in. Wide range of socket sizes to fit multiple applications including eight common SAE socket sizes 1, 1-7/16, 1-3/8, 1-5/16, 1-1/8, 1-1/16, 1-1/4, 1-1/2 inch. High-contrast visibility permanent laser etched size markings are easy-to-read in low light for easy retrieval and identification.

More information about Ridgerock Tools Inc. 30223A #ad


Similar products



TEKTON 4933 3/4-Inch Drive by 33 mm Deep Impact Socket, 6-Point

#ad
#ad
TEKTON 4933 #ad - Drive x 33 mm deep Impact Socket is engineered for use with impact drivers. Unique design grips the flat sides of fasteners rather than the corners to offer security and prevent stripping/ rounding off of bolts. Large, high-contrast size marking is permanently laser etched and easy to read, even in low light.

Made from high-strength, heat-treated, shock-resistant chrome vanadium steel with corrosion-resistant black oxide finish. High-torque, 6-point opening grips flat sides of fasteners, not corners, preventing round-off. Extra-deep broach accommodates longer fasteners. Exclusively designed for use with impact wrenches, set of 8 high-torque, 6-point SAE sockets with ¾" drive to remove tough nuts and bolts fasteners.

TEKTON 4933 3/4-Inch Drive by 33 mm Deep Impact Socket, 6-Point #ad - Professional quality reducers and adapters lock onto sockets with spring loaded ball detents and drive tangs for a sure and tight fit. Wide range of socket sizes to fit multiple applications including eight common SAE socket sizes 1, 1-5/16, 1-7/16, 1-3/8, 1-1/4, 1-1/16, 1-1/8, 1-1/2 inch. High-contrast visibility permanent laser etched size markings are easy-to-read in low light for easy retrieval and identification.

Includes: 3/8" to 1/4" reducer, 1" to 3/4" reducer, 1/2" to 3/4" adapter, 1/2" to 3/8" reducer, 3/8" to 1/2" adapter, 3/4" to 1/2" reducer, 1/4" to 3/8" adapter, 3/4" to 1" adapter. Engineered for use with impact drivers. Precisely machined, heat treated black chrome vanadium steel with a corrosion resistant black phosphate coating provides excellent durability and strength with every impact movement.

More information about TEKTON 4933 #ad


Similar products



TEKTON 3/4-Inch Drive x 40-Inch Breaker Bar | SBH00340

#ad
#ad
TEKTON SBH00340 #ad - Professional quality reducers and adapters lock onto sockets with spring loaded ball detents and drive tangs for a sure and tight fit. Long handle provides extended reach and the leverage to free rusted or stuck nuts and bolts. Wide range of socket sizes to fit multiple applications including eight common SAE socket sizes 1, 1-5/16, 1-1/16, 1-1/8, 1-3/8, 1-7/16, 1-1/4, 1-1/2 inch.

High-contrast visibility permanent laser etched size markings are easy-to-read in low light for easy retrieval and identification. Includes: 3/8" to 1/4" reducer, 1/2" to 3/4" adapter, 1/2" to 3/8" reducer, 1" to 3/4" reducer, 3/4" to 1/2" reducer, 1/4" to 3/8" adapter, 3/8" to 1/2" adapter, 3/4" to 1" adapter.

Engineered for use with impact drivers. High-torque, not corners, 6-point opening grips flat sides of fasteners, preventing round-off. Extra-deep broach accommodates longer fasteners. Exclusively designed for use with impact wrenches, set of 8 high-torque, 6-point SAE sockets with ¾" drive to remove tough nuts and bolts fasteners.

TEKTON 3/4-Inch Drive x 40-Inch Breaker Bar | SBH00340 #ad - Made from high-strength, heat-treated, shock-resistant chrome vanadium steel with corrosion-resistant black oxide finish. Sleek and simple handle design offers comfort and control in a variety of hand positions. Precisely machined, heat treated black chrome vanadium steel with a corrosion resistant black phosphate coating provides excellent durability and strength with every impact movement.

With an extra long handle and a 230-degree pivoting head, the TEKTON 3/4 inch drive x 40 inch Breaker bar gives you the leverage and flexibility to reach and break free rusted or stuck nuts and bolts.

More information about TEKTON SBH00340 #ad


Similar products



38mm | Cr-V Steel - Neiko 02460A 3/4" Deep Impact Metric Sockets, 8 Piece | 26mm

#ad
#ad
Ridgerock Tools Inc. 02460A #ad - Made of premium chrome vanadium steel with a protective black phosphate finish. Precisely machined, heat treated black chrome vanadium steel with a corrosion resistant black phosphate coating provides excellent durability and strength with every impact movement. Includes: 3/8" to 1/4" reducer, 3/8" to 1/2" adapter, 3/4" to 1/2" reducer, 1/2" to 3/4" adapter, 1" to 3/4" reducer, 1/4" to 3/8" adapter, 1/2" to 3/8" reducer, 3/4" to 1" adapter.

Engineered for use with impact drivers. Made of extremely durable and long lasting premium chrome molybdenum steel construction with corrosion-resistant black phosphate finish. Wide range of socket sizes to fit multiple applications including eight common SAE socket sizes 1, 1-3/8, 1-1/4, 1-1/16, 1-1/8, 1-5/16, 1-7/16, 1-1/2 inch.

38mm | Cr-V Steel - Neiko 02460A 3/4" Deep Impact Metric Sockets, 8 Piece | 26mm #ad - High-contrast visibility permanent laser etched size markings are easy-to-read in low light for easy retrieval and identification. Lobular 6-point design grips the flat sides of fasteners, rather than the corners to prevent stripping and rounding off of bolts. Extra large, making size selection quick and easy, high-contrast size markings are permanently laser etched onto each socket, even in low light.

Allows greater flexibility for sockets and drive tools and maximizes the versatility of ratchets and sockets. Long handle provides extended reach and the leverage to free rusted or stuck nuts and bolts. A complete drive impact socket adapter and reducer set with hard-to-find conversions; eliminates the need for multiple impact wrenches.

More information about Ridgerock Tools Inc. 02460A #ad


Similar products



Performance Tool M204 100-600 ft/lbs 3/4" Drive Wrench with LH/RH Thread Torque Capabilities

#ad
#ad
Performance Tool M204 #ad - Torque wrench Material: Steel. Made from high-strength, heat-treated, shock-resistant chrome vanadium steel with corrosion-resistant black oxide finish. 3/4" drive torque wrench with lh/rh thread torque capabilities Exclusively designed for use with impact wrenches, set of 8 high-torque, 6-point SAE sockets with ¾" drive to remove tough nuts and bolts fasteners.

. Wide range of socket sizes to fit multiple applications including eight common SAE socket sizes 1, 1-1/4, 1-7/16, 1-5/16, 1-1/8, 1-3/8, 1-1/16, 1-1/2 inch. High-contrast visibility permanent laser etched size markings are easy-to-read in low light for easy retrieval and identification. A complete drive impact socket adapter and reducer set with hard-to-find conversions; eliminates the need for multiple impact wrenches.

Performance Tool M204 100-600 ft/lbs 3/4" Drive Wrench with LH/RH Thread Torque Capabilities #ad - Professional quality reducers and adapters lock onto sockets with spring loaded ball detents and drive tangs for a sure and tight fit. Unique design grips the flat sides of fasteners rather than the corners to offer security and prevent stripping/ rounding off of bolts. Torque wrench Finish: Chrome. Left & righthand Thread Torque Capabilities.

High-torque, 6-point opening grips flat sides of fasteners, not corners, preventing round-off. Extra-deep broach accommodates longer fasteners. Designed for use with impact wrenches, high-torque, 6-point metric socket set with ¾" drive removes stubborn nuts and bolts.

More information about Performance Tool M204 #ad


Similar products



Neiko 00207B 3/4 in. Drive x 24 in. Premium Breaker Bar

#ad
#ad
Ridgerock Tools Inc. 00207B #ad - Unique design grips the flat sides of fasteners rather than the corners to offer security and prevent stripping/ rounding off of bolts. Spring-load ball bearing holds sockets securely. 230-degree pivoting head lets you approach your work from any angle. In 1 pound increments. Torque wrench body engraved with foot-pound and newton-meters.

Long Handle. Measures from 100 to 600 ft. Lbs. 180degree flex head lets you work at any angle exclusively designed for use with impact wrenches, set of 8 high-torque, 6-point SAE sockets with ¾" drive to remove tough nuts and bolts fasteners. Made of premium chrome vanadium steel with a protective black phosphate finish.

Neiko 00207B 3/4 in. Drive x 24 in. Premium Breaker Bar #ad - 24 inch extra long chrome vanadium steel handle provides maximum torque. Allows greater flexibility for sockets and drive tools and maximizes the versatility of ratchets and sockets. Precisely machined, heat treated black chrome vanadium steel with a corrosion resistant black phosphate coating provides excellent durability and strength with every impact movement.

Automotive Torque Tool. Professional quality reducers and adapters lock onto sockets with spring loaded ball detents and drive tangs for a sure and tight fit. Long handle provides extended reach and the leverage to free rusted or stuck nuts and bolts.

More information about Ridgerock Tools Inc. 00207B #ad


Similar products



Precision Instruments PREC4D600F Wrench 3/4" Dr. Split Beam Torque w/Detachable Head 200-600 Ft/Lbs

#ad
#ad
Precision Instruments PREC4D600F #ad - Length: 48". Meets or exceeds ansi standards ASME B107. 110-2012. Designed for use with impact wrenches, high-torque, 6-point metric socket set with ¾" drive removes stubborn nuts and bolts. Wide range of socket sizes to fit multiple applications including eight common SAE socket sizes 1, 1-1/4, 1-1/8, 1-3/8, 1-1/16, 1-7/16, 1-5/16, 1-1/2 inch.

High-contrast visibility permanent laser etched size markings are easy-to-read in low light for easy retrieval and identification. Made of extremely durable and long lasting premium chrome molybdenum steel construction with corrosion-resistant black phosphate finish. Precisely machined, heat treated black chrome vanadium steel with a corrosion resistant black phosphate coating provides excellent durability and strength with every impact movement.

Precision Instruments PREC4D600F Wrench 3/4" Dr. Split Beam Torque w/Detachable Head 200-600 Ft/Lbs #ad - The wrench has few components, and all critical parts are welded together at assembly. High-contrast visibility laser-etched size markings allow easy reading in low light settings. Torque wrench Finish: Chrome. Durability: All steel construction resists industrial fluids and abuse l. Heavy duty abs storage and carrying case included.

And is made in the USA. Forged and heat treated chrome-moly 3/4" drive head for added strength and durability.

More information about Precision Instruments PREC4D600F #ad


Similar products



E-Z Red 3/4" Drive Extendable Ratchet

#ad
#ad
E-Z Red MR34 #ad - Left & righthand Thread Torque Capabilities. The unique extendable handle extends from 24" to 40". Spring-load ball bearing holds sockets securely. Made from high-strength, heat-treated, shock-resistant chrome vanadium steel with corrosion-resistant black oxide finish. And is made in the USA. Unique, extendable locking shaft 3/4" drive head.

Measures from 100 to 600 ft. Lbs. Sleek and simple handle design offers comfort and control in a variety of hand positions. A complete drive impact socket adapter and reducer set with hard-to-find conversions; eliminates the need for multiple impact wrenches. Accuracy: 4 percent +- meets standards for torque wrenches.

E-Z Red 3/4" Drive Extendable Ratchet #ad - Meets or exceeds ansi standards ASME B107. 110-2012. 180-degree flexible head works at any angle, to reach around tight space and generate optimized leverage. Includes: 3/8" to 1/4" reducer, 3/8" to 1/2" adapter, 1/4" to 3/8" adapter, 3/4" to 1/2" reducer, 1/2" to 3/4" adapter, 1/2" to 3/8" reducer, 1" to 3/4" reducer, 3/4" to 1" adapter.

Engineered for use with impact drivers. Length: 48". The e-z red mr34 3/4" ratchet is extremely durable to get any job done.

More information about E-Z Red MR34 #ad


Similar products



Sunex 433md 3/4-Inch Drive 33-Mm Deep Impact Socket

#ad
#ad
Sunex International 433MD #ad - 230-degree pivoting head lets you approach your work from any angle. And is made in the USA. Unique, extendable locking shaft 3/4" drive head. Made from high-strength, heat-treated, shock-resistant chrome vanadium steel with corrosion-resistant black oxide finish. Precisely machined, heat treated black chrome vanadium steel with a corrosion resistant black phosphate coating provides excellent durability and strength with every impact movement.

Exclusively designed for use with impact wrenches, set of 8 high-torque, 6-point SAE sockets with ¾" drive to remove tough nuts and bolts fasteners. Dated calibration compliance certificate. Designed for use with impact wrenches, high-torque, 6-point metric socket set with ¾" drive removes stubborn nuts and bolts.

Sunex 433md 3/4-Inch Drive 33-Mm Deep Impact Socket #ad - . Sunex tools impact sockets tackle the toughest jobs with a chrome molybdenum alloy steel grip that won't let go. In 1 pound increments. Torque wrench body engraved with foot-pound and newton-meters. Wide range of socket sizes to fit multiple applications including eight common SAE socket sizes 1, 1-1/4, 1-1/8, 1-7/16, 1-3/8, 1-1/16, 1-5/16, 1-1/2 inch.

High-contrast visibility permanent laser etched size markings are easy-to-read in low light for easy retrieval and identification. A complete drive impact socket adapter and reducer set with hard-to-find conversions; eliminates the need for multiple impact wrenches.

More information about Sunex International 433MD #ad


Similar products