Morton Layout Add Ons 12″ & 3″ for Stained Glass

#ad
#ad
Morton LB02 #ad - A great way to expand your LB01 System. Pins and l's are made of Alluminum. Expand your layout Block System with the LB02. The morton layout add on is used to increase the size of the Layout Block System. Four 12" and four 3" aluminum blocks and 40 push pins. Set contains 4-12" l's, 4-3" L's and 40 Push Pins.

More information about Morton LB02 #ad

12" X 12" - Studio Pro 692 - Heat Resistant Stained Glass Work Surface

#ad
#ad
Diamond Tech International 692 #ad - Add multiple boards to create a larger work surface. Stained glass work surface - Ideal for cutting and assembling stained glass projects. Soft but rigid material accepts thumbtacks to hold projects in place. Square shape- 12" x 12" area is perfect for small projects while still having room for tools. Protects table and counter top surfaces from heat damage.

Use for multiple projects - use to protect from solder and copper-foiled projects. Can also be used as work surface for electronics soldering. Heat resistant & durable - made from 1/2" thick insulation material elevates project. 1/2-inch thick. Shape and size conveniently stores away when not in use. A must have in any studio - easily move your uncompleted project to different areas of your work space.

12" X 12" - Studio Pro 692 - Heat Resistant Stained Glass Work Surface #ad - Ample space for small stained glass projects with room to spread-out tools and equipment. This 12-inch-by-12-inch heat resistant work surface is made from insulation material and is a perfect work surface for soldering copper-foiled stained glass.

More information about Diamond Tech International 692 #ad


Similar products



Morton Layout Add On's 6" for stained glass

#ad
#ad
Morton LB01 #ad - Shape and size conveniently stores away when not in use. A must have in any studio - easily move your uncompleted project to different areas of your work space. Can also be used as work surface for electronics soldering. Heat resistant & durable - made from 1/2" thick insulation material elevates project. Soft but rigid material accepts thumbtacks to hold projects in place.

Square shape- 12" x 12" area is perfect for small projects while still having room for tools. Stained glass work surface - Ideal for cutting and assembling stained glass projects. Replaces using wood board, - allows for 16" x 26" projects with each set, & horseshoe nails of traditional layout boards, 6-inch aluminum blocks & 40 push pins allow use of inexpensive soft boards, - Recommended by teachers for home hobbyists, - Ten, wood strips, - Comes in storage box.

Morton Layout Add On's 6" for stained glass #ad - Add multiple boards to create a larger work surface. Protects table and counter top surfaces from heat damage. Use for multiple projects - use to protect from solder and copper-foiled projects.

More information about Morton LB01 #ad


Similar products



Studio Pro cialty FID Pack

#ad
#ad
Diamond Tech International 665 #ad - Designed for comfort, durability and performance, Studio Pro high quality glass tools and accessories are an excellent value and will quickly become a favorite for any stained glass project. Shape and size conveniently stores away when not in use. A must have in any studio - easily move your uncompleted project to different areas of your work space.

. Can also be used as work surface for electronics soldering. Heat resistant & durable - made from 1/2" thick insulation material elevates project. Contains 2 specially designed plastic fids destined to become your most indispensable tools. Use the unique rooster-shaped fid to widen lead channels or burnish foil; while the straight line simplicity of the second fid, effectively burnishes foil for a nice smooth surface, essential for even solder lines.

Studio Pro cialty FID Pack #ad - Soft but rigid material accepts thumbtacks to hold projects in place. Square shape- 12" x 12" area is perfect for small projects while still having room for tools. Add multiple boards to create a larger work surface. Badge holders are designed to keep your valuable, high-tech proximity card safe, clean and secure.

Id badge card sold separately cannot be removed when clip is attached. Thread a strap clip or neck chain adapter through both sides of the vinyl proximity badge holder to lock it into place.

More information about Diamond Tech International 665 #ad


Similar products



8 Oz - Novacan Old Masters Flux

#ad
#ad
Novacan Industries OMFLUX #ad - This all-purpose zinc flux is a stained glass classic. Cleans up easily with water. Id badge card sold separately cannot be removed when clip is attached. Novacan old masters Flux - 8 Oz. Can also be used as work surface for electronics soldering. Heat resistant & durable - made from 1/2" thick insulation material elevates project.

. Shape and size conveniently stores away when not in use. A must have in any studio - easily move your uncompleted project to different areas of your work space. 8 oz stained glass work surface - Ideal for cutting and assembling stained glass projects. Thread a strap clip or neck chain adapter through both sides of the vinyl proximity badge holder to lock it into place.

8 Oz - Novacan Old Masters Flux #ad - 8 oz. Protects table and counter top surfaces from heat damage. Use for multiple projects - use to protect from solder and copper-foiled projects. Add multiple boards to create a larger work surface. Badge holders are designed to keep your valuable, high-tech proximity card safe, clean and secure. Novacan Old Masters Flux.

Cleans up easily with water.

More information about Novacan Industries OMFLUX #ad


Similar products



Stained Glass Flux Brushes / 6 Pack

#ad
#ad
VGCE WBBRUS-6 #ad - The brush portion is approximately. 75" while the metal portionhandle of the brush is approximately 5. 25". Novacan Old Masters Flux. All-purpose zinc flux. Can also be used as work surface for electronics soldering. Heat resistant & durable - made from 1/2" thick insulation material elevates project. Thread a strap clip or neck chain adapter through both sides of the vinyl proximity badge holder to lock it into place.

Protects table and counter top surfaces from heat damage. Use for multiple projects - use to protect from solder and copper-foiled projects. High quality brushes for stained glass construction. 8 oz. Cleans up easily with water. Pack of six. Stained glass work surface - Ideal for cutting and assembling stained glass projects.

Stained Glass Flux Brushes / 6 Pack #ad - The overall length of each brush is approximately 6". Shape and size conveniently stores away when not in use. A must have in any studio - easily move your uncompleted project to different areas of your work space. Add multiple boards to create a larger work surface. Badge holders are designed to keep your valuable, high-tech proximity card safe, clean and secure.

More information about VGCE WBBRUS-6 #ad


Similar products



Studio Pro Foil Shears

#ad
#ad
Diamond Tech International 604 #ad - The overall length of each brush is approximately 6". Designed for comfort, durability and performance. 8 oz. Designed for comfort, durability and performance, Studio Pro high quality glass tools and accessories are an excellent value and will quickly become a favorite for any stained glass project. Soft but rigid material accepts thumbtacks to hold projects in place.

Square shape- 12" x 12" area is perfect for small projects while still having room for tools. These shears remove the same amount of paper as the thickness of foil, so you get a precisely cut pattern, eliminating grinding time. Shape and size conveniently stores away when not in use. A must have in any studio - easily move your uncompleted project to different areas of your work space.

Studio Pro Foil Shears #ad - Remove the same amount of paper as the thickness of foil. Eliminate grinding time with a precisely cut pattern. All-purpose zinc flux. Thread a strap clip or neck chain adapter through both sides of the vinyl proximity badge holder to lock it into place. Protects table and counter top surfaces from heat damage.

Use for multiple projects - use to protect from solder and copper-foiled projects. Stained glass work surface - Ideal for cutting and assembling stained glass projects.

More information about Diamond Tech International 604 #ad


Similar products



Novacan Black Patina for Solder

#ad
#ad
Novacan LGNBPFS #ad - Add multiple boards to create a larger work surface. Badge holders are designed to keep your valuable, high-tech proximity card safe, clean and secure. Premixed and ready to use. Designed for comfort, durability and performance. Stained glass work surface - Ideal for cutting and assembling stained glass projects.

Remove the same amount of paper as the thickness of foil. Thread a strap clip or neck chain adapter through both sides of the vinyl proximity badge holder to lock it into place. 8 oz. 8 oz. Soft but rigid material accepts thumbtacks to hold projects in place. Square shape- 12" x 12" area is perfect for small projects while still having room for tools.

Novacan Black Patina for Solder #ad - Protects table and counter top surfaces from heat damage. Use for multiple projects - use to protect from solder and copper-foiled projects. 8 oz bottle black patina to be used on solder or lead. The brush portion is approximately. 75" while the metal portionhandle of the brush is approximately 5. 25". Cleans up easily with water.

More information about Novacan LGNBPFS #ad


Similar products



Morton Mini Surface Plus

#ad
#ad
Morton SS02P #ad - Novacan Old Masters Flux. All-purpose zinc flux. Remove the same amount of paper as the thickness of foil. Eliminate grinding time with a precisely cut pattern. Bottle. Great Performance! The brush portion is approximately. 75" while the metal portionhandle of the brush is approximately 5. 25". 8 oz. 8 oz. Cleans up easily with water.

Soft but rigid material accepts thumbtacks to hold projects in place. Square shape- 12" x 12" area is perfect for small projects while still having room for tools. Each 11-1/4" x15-3/4". The overall length of each brush is approximately 6". Can also be used as work surface for electronics soldering. Heat resistant & durable - made from 1/2" thick insulation material elevates project.

Morton Mini Surface Plus #ad - Flip the cutting surface over for a tracing surface for patterns. 100% compatible with all Morton cutting tools and accessories. One set 2 panels assembled together is the same size as the old mini surface, and two sets 4 total panels make up the old maxi surface. Pack of six. Designed for comfort, durability and performance.

More information about Morton SS02P #ad


Similar products



Canfield 60/40 solder for stained glass

#ad
#ad
Canfield WBCANFIELD6040 #ad - 1 lb top quality solder for stained glass work. 8 oz. The overall length of each brush is approximately 6". Stained glass work surface - Ideal for cutting and assembling stained glass projects. Eliminate grinding time with a precisely cut pattern. Thread a strap clip or neck chain adapter through both sides of the vinyl proximity badge holder to lock it into place.

60/40 is 60% tin and 40% lead. Premixed and ready to use. 100% compatible with all Morton cutting tools and accessories. Bottle. Great Performance!60/40 is the most commonly used type of solder for hand soldering Solid core. All-purpose zinc flux. Remove the same amount of paper as the thickness of foil. Soft but rigid material accepts thumbtacks to hold projects in place.

Canfield 60/40 solder for stained glass #ad - Square shape- 12" x 12" area is perfect for small projects while still having room for tools. Id badge card sold separately cannot be removed when clip is attached. Offers superior flow. Novacan Old Masters Flux.

More information about Canfield WBCANFIELD6040 #ad


Similar products



2 Pack - 12" x 12" Homasote Board

#ad
#ad
Delphi Glass #ad - 8 oz. Designed for comfort, durability and performance. Shape and size conveniently stores away when not in use. A must have in any studio - easily move your uncompleted project to different areas of your work space. All-purpose zinc flux. Thread a strap clip or neck chain adapter through both sides of the vinyl proximity badge holder to lock it into place.

Soft but rigid material accepts thumbtacks to hold projects in place. Square shape- 12" x 12" area is perfect for small projects while still having room for tools. One worksurface for your Art Glass Needs Homasote Board in an essential for any stained glass studio. Pack of six. Eliminate grinding time with a precisely cut pattern.

2 Pack - 12" x 12" Homasote Board #ad - Novacan Old Masters Flux. Use to: glass cutting surface assembling stained glass panels Soldering stained glass panels Protcet your surface from table top kilns Stained glass work surface - Ideal for cutting and assembling stained glass projects. The overall length of each brush is approximately 6". Made from pressed fiberboard, homasote is heat resistant and ideal for cutting, soldering and assembly of stained glass.

For use on copper foil seams and lead came seams. Remove the same amount of paper as the thickness of foil.

More information about Delphi Glass #ad


Similar products