Kreg KMA2600 Square-Cut

#ad
#ad
Kreg KMA2600 #ad - Supports work pieces up to 12-Inch wide. Kreg kma2600 square-cut, 1/2" wide Switch back and forth between any circular or jig saw. Built-in roof pitch scale for cutting siding. Low-profile design won't interfere with saw. Adjustable arm requires no trimming.

More information about Kreg KMA2600 #ad

Kreg KMA2685 Circular Saw Guide

#ad
#ad
Kreg KMA2685 #ad - Use the oversize edge guide for precise control throughout the cut. So, all you have to do is lock the saw in at the measurement you want—up to 24"—using the built-in measuring scale, and then make your cut. Take your saw to the material instead of having to take your material to the saw. Just lock the saw sled at your desired cut width, and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size.

With a built-in measuring scale, you don’t have to measure and mark each cut, either. Eliminate need for marking, measuring, and layout lines. Cut multiple pieces to the same size with just one setup. You’ll get straight, accurate, repeatable cuts easily every time. Then, just hold the edge guide against the edge of your sheet as you guide the saw.

Kreg KMA2685 Circular Saw Guide #ad - Plus, the rip-cut makes it easier to cut down large sheets by yourself. The rip-cut is very easy to use. With the rip-cut, you can cut with the confidence you want and the precision you need. The rip-cut easily makes straight, accurate, marking, repeatable cuts without measuring, or having to keep the saw on the cut line.

The rip-cut does this with a long edge guide that follows the straight edge of the sheet you are cutting.

More information about Kreg KMA2685 #ad


Similar products



Kreg KMA2700 Circular Saw Track

#ad
#ad
Kreg KMA2700 #ad - Kreg kma2700 circular saw track Make rip cuts and crosscuts up to 24" wide. Eliminate need for marking, measuring, and layout lines. Use the oversize edge guide for precise control throughout the cut. Hold track in place without Clamps thanks to Anti-slip guide strips. Prevent splintering with anti-chip strips that support material during the cut.

Rip, crosscut, mdf, and make angled cuts up to 48" long in plywood, and panels. Simply align the guide track with your marks to make accurate cuts. Take your saw to the material instead of having to take your material to the saw. Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,.

Kreg KMA2700 Circular Saw Track #ad - Cut multiple pieces to the same size with just one setup.

More information about Kreg KMA2700 #ad


Similar products



Kreg KMA2900 Multi-Mark Multi-Purpose Marking and Measuring Tool

#ad
#ad
Kreg KMA2900 #ad - Cumulative scale for transferring measurements. From the manufacturer: The Kreg Multi-Mark is an incredibly handy multi-purpose marking. The multi-mark features three different scale configurations, a built-in level, a handy 3/16" reveal gauge. Hold track in place without Clamps thanks to Anti-slip guide strips.

Item is manufactured in United States. Make rip cuts and crosscuts up to 24" wide. Prevent splintering with anti-chip strips that support material during the cut. Rip, and make angled cuts up to 48" long in plywood, MDF, crosscut, and panels. Simply align the guide track with your marks to make accurate cuts.

Kreg KMA2900 Multi-Mark Multi-Purpose Marking and Measuring Tool #ad - Cut multiple pieces to the same size with just one setup. Wide variety of measuring and marking functions. Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,. Take your saw to the material instead of having to take your material to the saw. Perfect for general layout.

3 unique scale positions. Use the oversize edge guide for precise control throughout the cut. With this tool you can layout mitered corners, transfer measurements, layout wall studs, align/square your projects, set 3/16-Inch reveals, use as a basic rule, set bit/blade heights, marking for layout and use as a simple level.

More information about Kreg KMA2900 #ad


Similar products



Kreg KMA2700 Accu-Cut 48-Inch Guide Track System With KMA2685 Rip-Cut 24-Inch Precision Edge Guide

#ad
#ad
Kreg #ad - Prevent splintering with anti-chip strips that support material during the cut. Cumulative scale for transferring measurements. Rip, and make angled cuts up to 48" long in plywood, MDF, crosscut, and panels. Simply align the guide track with your marks to make accurate cuts. Cut multiple pieces to the same size with just one setup.

Hold track in place without Clamps thanks to Anti-slip guide strips. From the manufacturer: The Kreg Multi-Mark is an incredibly handy multi-purpose marking. Take your saw to the material instead of having to take your material to the saw. Easy sawing: take your saw to the material instead of having to take your material to the saw.

Kreg KMA2700 Accu-Cut 48-Inch Guide Track System With KMA2685 Rip-Cut 24-Inch Precision Edge Guide #ad - Rip-cut: make rip cuts and crosscuts up to 24 inches wide rip-cut: cut multiple pieces to the same size with just one setup rip-cut: oversize reversible guide for precision and ambidexterity Rip-Cut: Remove need for marking, saw guide and circular guide rail Accu-Cut: Rip, measuring and layout lines Rip-Cut: Includes universal sled, cross cut and make angled cuts up to 48" long   Accu-Cut: Makes straight, precise and splinter-free cuts Accu-Cut: Simply align with marks to make super-accurate cuts Accu-Cut: Anti-slip coating and anti-chip feature Universal: Two interchangeable saw sleds included Make rip cuts and crosscuts up to 24" wide.

3/16-inch offset for door trim. Item is manufactured in United States. Use the oversize edge guide for precise control throughout the cut. Guide: use the oversize edge guide for precise control throughout the cut / Eliminate need for marking, measuring, and layout lines / Hold track in place without clamps thanks to anti-slip guide strips.

More information about Kreg #ad


Similar products



Kreg KWS1000 Mobile Project Center,

#ad
#ad
Kreg Tool Company KWS1000 #ad - Heavy-gauge steel legs provide a solid foundation. Make rip cuts and crosscuts up to 24" wide. Hold track in place without Clamps thanks to Anti-slip guide strips. Easy sawing: take your saw to the material instead of having to take your material to the saw. Versatile: rip, cross cut, mdf, and make angled cuts up to 48" long in plywood, and panels / Simply align the Guide Track with your marks to make accurate cuts.

Bundle includes: kreg kma2700 accu-Cut 48-Inch Circular Saw Guide Track System. Cuts: make rip cuts and crosscuts up to 24" wide / Cut multiple pieces to the same size with just one setup / Prevent splintering with anti-chip strips that support material during the cut. Hole pattern on tables accept bench dogs and other Accessories.

. Guide: use the oversize edge guide for precise control throughout the cut / Eliminate need for marking, measuring, and layout lines / Hold track in place without clamps thanks to anti-slip guide strips. Wide variety of measuring and marking functions. It's easy to set up and store away, and it provides a sturdy platform for all kinds of project tasks.

Kreg KWS1000 Mobile Project Center, #ad - Auto-adjust bench Clamp and 4 bench dogs included. The mobile project center is a workbench, repair, and clamping station all in one that provides a versatile workspace for DIY, Sawhorse, assembly Table, and woodworking projects. Prevent splintering with anti-chip strips that support material during the cut.

More information about Kreg Tool Company KWS1000 #ad


Similar products



Kreg KBCIC In-Line Clamp Pack of 2

#ad
#ad
Kreg #ad - Multiple work modes provide maximum versatility. Hold track in place without Clamps thanks to Anti-slip guide strips. Of clamping force and swivels to clamp from any angle on almost any shape workpiece or assembly. The multi-mark features three different scale configurations, a built-in level, a handy 3/16" reveal gauge.

Prevent splintering with anti-chip strips that support material during the cut. 3 unique scale positions. Range: long pushrod provides 43/4" adjustment range. Easy sawing: take your saw to the material instead of having to take your material to the saw. Versatile: rip, cross cut, mdf, and make angled cuts up to 48" long in plywood, and panels / Simply align the Guide Track with your marks to make accurate cuts.

Kreg KBCIC In-Line Clamp Pack of 2 #ad - Bundle includes: kreg kma2700 accu-Cut 48-Inch Circular Saw Guide Track System. Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,. Perfect for general layout. Cumulative scale for transferring measurements. Cut multiple pieces to the same size with just one setup.

Use the oversize edge guide for precise control throughout the cut. Item is manufactured in United States.

More information about Kreg #ad


Similar products



Kreg KHC-PREMIUM Face Clamp

#ad
#ad
Kreg KHC-PREMIUM #ad - The multi-mark features three different scale configurations, a built-in level, a handy 3/16" reveal gauge. Auto-adjust bench Clamp and 4 bench dogs included. Guide: use the oversize edge guide for precise control throughout the cut / Eliminate need for marking, measuring, and layout lines / Hold track in place without clamps thanks to anti-slip guide strips.

Hole pattern on tables accept bench dogs and other Accessories. Clamp can also be used to secure Portable Kreg Jigs To The Work Piece. Multiple work modes provide maximum versatility. Prevent splintering with anti-chip strips that support material during the cut. 3-inch reach, will handle work Pieces Up To 2-3/4-Inch Thick.

Kreg KHC-PREMIUM Face Clamp #ad - Unique clamp designed Specifically For Pocket-Screw Joinery. 3/16-inch offset for door trim. Best for a majority Of Pocket-Screw Applications. Heavy-gauge steel legs provide a solid foundation. Make rip cuts and crosscuts up to 24" wide. Use the oversize edge guide for precise control throughout the cut. Used primarily for securing individual joints while Pocket-Screws are being driven.

More information about Kreg KHC-PREMIUM #ad


Similar products



Kreg SK03 Pocket-Hole Screw Kit in 5 Sizes

#ad
#ad
Kreg SK03 #ad - Prevent splintering with anti-chip strips that support material during the cut. Auto-adjust bench Clamp and 4 bench dogs included. Wide variety of measuring and marking functions. Take your saw to the material instead of having to take your material to the saw. Includes a a needlepoint self-tapping tip. All kreg screws feature a deep No.

Shoe: versatile clamp shoe holds multiple shapes. Use the oversize edge guide for precise control throughout the cut. Includes self-tapping screw sizes for pocket-screw joinery. The multi-mark features three different scale configurations, a built-in level, a handy 3/16" reveal gauge. 2 square drive. Contains 675 of 5 most used screws.

Kreg SK03 Pocket-Hole Screw Kit in 5 Sizes #ad - Versatile: rip, mdf, cross cut, and make angled cuts up to 48" long in plywood, and panels / Simply align the Guide Track with your marks to make accurate cuts. Bundle includes: kreg kma2700 accu-Cut 48-Inch Circular Saw Guide Track System. Heavy-gauge steel legs provide a solid foundation. Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,.

Hold track in place without Clamps thanks to Anti-slip guide strips. Hole pattern on tables accept bench dogs and other Accessories.

More information about Kreg SK03 #ad


Similar products



Kreg Tool Company KHI-SLIDE Drawer Slide Jig

#ad
#ad
Kreg KHI-SLIDE #ad - Repeatable results without measuring and marking. Shoe: versatile clamp shoe holds multiple shapes. Easy sawing: take your saw to the material instead of having to take your material to the saw. Hole pattern on tables accept bench dogs and other Accessories. Heavy-gauge steel legs provide a solid foundation. Kreg tool company khi-slide drawer Slide Jig Make rip cuts and crosscuts up to 24" wide.

Includes self-tapping screw sizes for pocket-screw joinery. All kreg screws feature a deep No. Multiple work modes provide maximum versatility. Versatile: rip, and make angled cuts up to 48" long in plywood, MDF, cross cut, and panels / Simply align the Guide Track with your marks to make accurate cuts. Bundle includes: kreg kma2700 accu-Cut 48-Inch Circular Saw Guide Track System.

Kreg Tool Company KHI-SLIDE Drawer Slide Jig #ad - Auto-adjust bench Clamp and 4 bench dogs included. Range: long pushrod provides 43/4" adjustment range. Perfect for general layout. Folds down in seconds for work on the go, and for easy storage. Cumulative scale for transferring measurements. Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,.

More information about Kreg KHI-SLIDE #ad


Similar products



KREG Tools SSW Kreg Screw Selector Wheel. Woodworking

#ad
#ad
KREG #ad - Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,. Auto-adjust bench Clamp and 4 bench dogs included. Prevent splintering with anti-chip strips that support material during the cut. 3 unique scale positions. Hold track in place without Clamps thanks to Anti-slip guide strips.

Guide: use the oversize edge guide for precise control throughout the cut / Eliminate need for marking, measuring, and layout lines / Hold track in place without clamps thanks to anti-slip guide strips. Multiple work modes provide maximum versatility. Just dial in the thickness of each piece to be joinedwhether those thicknesses are the same or differentand the Wheel shows you the correct screw length and Kreg Jigsetting.

KREG Tools SSW Kreg Screw Selector Wheel. Woodworking #ad - Versatile for use in cabinets, cases, and more. Key features include: two sided: shows face joints and edge joints works with 1/2, 5/8, 1-3/8, 1-1/4, 7/8, 1, K5, 3/4, 1-1/8, 1-1/2 material Compatible with Kreg JigK3, K4MS, K4, and R3 Durable .5mm polypropylene construction Tab with hole makes the Wheel easy tohang Make rip cuts and crosscuts up to 24" wide.

Eliminate need for marking, measuring, and layout lines. Fits: sturdy peg fits standard 3/4" bench dog holes. Use the oversize edge guide for precise control throughout the cut. Built-in storage trays hold hardware and Parts.

More information about KREG #ad


Similar products