ELEGOO 4 Channel DC 5V Relay Module with Optocoupler for Arduino UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi

#ad
#ad
ELEGOO EL-SM-006 #ad - 4-channel relay interface board, which can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, plc, arm, pic, etc. 2, plc control; 4, the industrial sector; 3, smart home control; This relay module is 5v active low. Uses: 1, support all MCU control. It is also able to control various appliances and other equipments with large current.

Widely used for all mcu control, PLC control, industrial sector, smart home control.4-channel relay output modules, relay output contacts 250V 10A. Input in1, in2, in3, in4, the signal line LOW effective. Relay output maximum contact is AC250V 10A and DC30V 10A. Standard interface can be directly connected with microcontrollers.

ELEGOO 4 Channel DC 5V Relay Module with Optocoupler for Arduino UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi #ad - Working status indicator lights are conducive to the safe use. Vcc, gnd power input, can relay a separate power supply relay power input of JD-VCC.

More information about ELEGOO EL-SM-006 #ad

Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

#ad
#ad
Elegoo EL-CP-004 #ad - Packing in a color box. We have always cared about the customer experience and improve the product function details. We’d like to receive your valuable suggestions for our products and make your idea come true. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires.

We have the manufacture factory, making productions and selling by ourselves. So we can control the quality of our productions by ourselves for you. Component listing: 1pcs 40-pin male to female jumper wires 1pcs 40-pin male to malejumper wires 1pcs 40-pin female to female jumper wires Each cable length: about 20 cm /8-inch.

Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino #ad - The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.

More information about Elegoo EL-CP-004 #ad


Similar products



Elegoo EL-CB-001 UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino

#ad
#ad
Elegoo EL-CB-001 #ad - We have always cared about the customer experience and improve the product function details. Control using atmel ATMEGA328P chip. Each cable length: about 20 cm /8-inch. New improvement: clearly printed on the female header connector, more precise and easier to use the wire. 100 percent compatible with the official version, for Arduino uno R3.

The uno now uses an atmega16u2 instead of the ATMega8U2 chip. We have the manufacture factory, making productions and selling by ourselves. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. Faster transfer rates and more memory. Features * atmega328p microcontroller * input voltage - 7-12V * 5V Electric current: 500MA * 3.

Elegoo EL-CB-001 UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino #ad - 3v electric current: 50ma * 14 digital i/o pins 6 pwm outputs * 8 analog inputs * 32k Flash Memory * 16Mhz Clock Speed Component listing: 1pcs UNO R3 Development Board 1pcs USB cable. So we can control the quality of our productions by ourselves for you. Packing in a color box. We have always cared about the customer experience and improve the product function details.

We'd like to receive your valuable suggestions for our products and make your idea come true.

More information about Elegoo EL-CB-001 #ad


Similar products



Makerfocus D1 Mini NodeMcu 4M Bytes Lua WiFi Development Board Base on ESP8266 ESP-12F N Compatible NodeMcu Arduino

#ad
#ad
MakerFocus FBA_1CK10190603FII378 #ad - Install Arduino 1. 6. 7 from the Arduino website. Andlt;2andgt;. Open tools¡úboard:xxx¡úboards manager and install esp8266 by ESP8266 Community and donandamp;39;t forget to select your ESP8266 board from Tools andgt; Board menu after installation. Installing with GIT Recommend:5. There is two ways to install hardware package, Boards Manager or GITInstalling with Boards Manager4.

Support OTA on line. Start arduino and open Preferences window. We have always cared about the customer experience and improve the product function details. Using the Arduino IDE for programming. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.

Makerfocus D1 Mini NodeMcu 4M Bytes Lua WiFi Development Board Base on ESP8266 ESP-12F N Compatible NodeMcu Arduino #ad - . D1 mini nodemcu 4m bytes lua wifi development board esp8266 esp-12f by wemosdescription:esp8266, esp-12FWIFI Development Board4M bytesThis is D1 mini, it is a mini WIFI board based on ESP-8266EX. 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wiresupportedexcept D01 analog input3. 3v max input1 micro usb connectionHow to get started in Arduino:Setup driver:1.

We recommend using git to install Hardware package, you can always get the latest version of it. Package including1 * d1 mini nodemcu 4m bytes Lua WIFI Development Board Each cable length: about 20 cm /8-inch.

More information about MakerFocus FBA_1CK10190603FII378 #ad


Similar products



Elegoo EL-CB-003 MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable for Arduino

#ad
#ad
Elegoo EL-CB-003 #ad - New improvement: clearly printed on the female header connector, more precise and easier to use the wire. Faster transfer rates and more memory. Use 5. 5 * 2. 1mm dc barrel jack compatible with 5. 5 * 2. 5mm dc barrel jack. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

We have the manufacture factory, making productions and selling by ourselves. Packing in a color box. We have always cared about the customer experience and improve the product function details. This is d1 mini, it is a mini wIFI board based on ESP-8266EX. Wifi development Board, 4M bytes. Arduino ompatibility.

Elegoo EL-CB-003 MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable for Arduino #ad - The chip is atmega2560-16au and Atmega16u2, same with the official version. We'd like to receive your valuable suggestions for our products and make your idea come true. We have always cared about the customer experience and improve the product function details. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.

So we can control the quality of our productions by ourselves for you.

More information about Elegoo EL-CB-003 #ad


Similar products



ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 Nano x 3 Without Cable

#ad
#ad
ELEGOO EL-CB-005 #ad - It has everything that diecimila/Duemilanove has electrically with more analog input pins and onboard +5V AREF jumper. Nano's got the breadboard-ability of the boarduino and the mini+usb with smaller footprint than either, RX, GND on one top, so users have more breadboard space. This is d1 mini, it is a mini wIFI board based on ESP-8266EX.

Wifi development Board, 4M bytes. Arduino ompatibility. The uno now uses an atmega16u2 instead of the ATMega8U2 chip. It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. New improvement: clearly printed on the female header connector, more precise and easier to use the wire.

ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 Nano x 3 Without Cable #ad - We have always cared about the customer experience and improve the product function details. Faster transfer rates and more memory. Stronger reset circuit. The mega is 100 percent compatible with Arduino and most shields designed for the Arduino Mega2560 R3. You could download the driver of Elegoo Nano V3. 0 at: http://bit.

Ly/2jklJMO.

More information about ELEGOO EL-CB-005 #ad


Similar products



ARDUINO UNO R3 A000066

#ad
#ad
ARDUINO A000066 #ad - Control using atmel ATMEGA328P chip. It's got a pin layout that works well with the Mini or the Basic Stamp TX, ATN, power and ground on the other. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. New improvement: clearly printed on the female header connector, more precise and easier to use the wire.

Support OTA on line. The chip is atmega2560-16au and Atmega16u2, same with the official version. Arduino uno is the most used and documented board in the world. This is d1 mini, it is a mini wIFI board based on ESP-8266EX. Wifi development Board, 4M bytes. Arduino ompatibility. 100 percent compatible with the official version, for Arduino uno R3.

ARDUINO UNO R3 A000066 #ad - The nano is using the chips atmega328p and cH340, not FT232 as official Arduino, so pls. Uno" means one in italian and was chosen to mark the release of Arduino Software IDE 1. 0, now evolved to newer releases. Use 5. 5 * 2.

More information about ARDUINO A000066 #ad


Similar products



SunFounder 2 Channel DC 5V Relay Module with Optocoupler Low Level Trigger Expansion Board for Arduino UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi

#ad
#ad
SunFounder #ad - The power source is automatically selected to the highest voltage source. This board is your entry to the unique Arduino experience: great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs. The 2 relays on the module are independent of each other, once a relay is triggered by the low level, the corresponding LED lights will be lit and accompanied by a crisp sound.

We have always cared about the customer experience and improve the product function details. 100 percent compatible with the official version, for Arduino uno R3. Support OTA on line. Control using atmel ATMEGA328P chip. It has everything that diecimila/Duemilanove has electrically with more analog input pins and onboard +5V AREF jumper.

SunFounder 2 Channel DC 5V Relay Module with Optocoupler Low Level Trigger Expansion Board for Arduino UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi #ad - Nano's got the breadboard-ability of the boarduino and the mini+usb with smaller footprint than either, GND on one top, RX, so users have more breadboard space. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires. It can be controlled directly by microcontrollerarduino, Raspberry Pi, DSP, MSP430, 8051, AVR, ARM, PIC, TTL logic.

5v 2-channel relay interface board, and each one needs 15-20mA Driver Current. Standard interface that can be controlled directly by microcontroller Arduino, AVR, ARM, ARM, Raspberry Pi, MSP430, PIC, DSP, 8051, TTL logic. Indication LED's for Relay output status.

More information about SunFounder #ad


Similar products



HiLetgo 2pcs ESP8266 NodeMCU LUA CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Works Great with Arduino IDE/Micropython Pack of 2PCS

#ad
#ad
HiLetgo 3-01-0268 #ad - Set up your arduino ide as: go to file->preferences and copy the URL below to get the ESP board manager extensions: http://arduino. Esp8266. Com/stable/package_esp8266com_index. Json placing the http:// before the URL lets the Arduino IDE use it. Otherwise it gives you a protocol error. Go to tools > board > board manager> Type "esp8266" and download the Community esp8266 and install.

Data download access to the website: http://www. Nodemcu. Com. Go to file> examples> esp8266> blink, it will start blinking. Install the IDE 3. Using the Arduino IDE for programming. 5v 1a switching power supply switching power supply)onboard. Stronger reset circuit. The chip is atmega2560-16au and Atmega16u2, same with the official version.

HiLetgo 2pcs ESP8266 NodeMCU LUA CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Works Great with Arduino IDE/Micropython Pack of 2PCS #ad - 5. Size: 505mml x 38. 5mmw x 18.

More information about HiLetgo 3-01-0268 #ad


Similar products



Haitronic 120pcs 20cm Length Jumper Wires/Dupont Cable Multicolored10 Color 40pin M to F, 40pin M to M, 40pin F to F for Breadboard/Arduino Based/DIY/ Raspberry Pi 2 3/Robot Ribbon Cables Ki

#ad
#ad
der DZ-DBX-01 #ad - Faster transfer rates and more memory. Built-in micro-usb, with flash and reset switches, easy to program. We have always cared about the customer experience and improve the product function details. Support OTA on line. Use the driver from above link. It is a smallest, complete, and breadboard friendly board. Firmware link: https://github.

Com/nodemcu/nodemcu-firmware. It's got a pin layout that works well with the Mini or the Basic Stamp TX, ATN, power and ground on the other. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27. Arduino uno is the most used and documented board in the world.

Haitronic 120pcs 20cm Length Jumper Wires/Dupont Cable Multicolored10 Color 40pin M to F, 40pin M to M, 40pin F to F for Breadboard/Arduino Based/DIY/ Raspberry Pi 2 3/Robot Ribbon Cables Ki #ad - Each cable length: 20cm / 8-inch. Uno" means one in italian and was chosen to mark the release of Arduino Software IDE 1. 0, now evolved to newer releases. Stronger reset circuit. Portable design, easy and safe to use. The mega is 100 percent compatible with Arduino and most shields designed for the Arduino Mega2560 R3.

Equiped with high-current relay, AC250V 10A ; DC30V 10A.

More information about der DZ-DBX-01 #ad


Similar products



Elegoo EL-SM-004 UNO R3 2.8 Inches TFT Touch Screen with SD Card Socket w/All Technical Data in CD for Arduino UNO R3

#ad
#ad
Elegoo EL-SM-004 #ad - 5v 2-channel relay interface board, and each one needs 15-20mA Driver Current. You could download the driver of Elegoo Nano V3. 0 at: http://bit. Ly/2jklJMO. It's got a pin layout that works well with the Mini or the Basic Stamp TX, ATN, power and ground on the other. The nano can be powered via the mini-b usb connection, 7-12V unregulated external power supply pin 30, or 5V regulated external power supply pin 27.

This is d1 mini, it is a mini wIFI board based on ESP-8266EX. Wifi development Board, 4M bytes. Arduino ompatibility. 10 different colors, for making prototypes with arduino boards, stepper motor 3D printer etc, 120units copper cable in total, The combinations provide a jumper for whatever you need. Control using atmel ATMEGA328P chip.

Elegoo EL-SM-004 UNO R3 2.8 Inches TFT Touch Screen with SD Card Socket w/All Technical Data in CD for Arduino UNO R3 #ad - Built-in micro-usb, with flash and reset switches, easy to program. The chip is atmega2560-16au and Atmega16u2, same with the official version. We have always cared about the customer experience and improve the product function details. Equiped with high-current relay, AC250V 10A ; DC30V 10A. Including 1x 40-pin male to female jumper wires, 1X 40-pin male to male jumper wires, 1x40-pin female to female jumper wires.

Using the Arduino IDE for programming.

More information about Elegoo EL-SM-004 #ad


Similar products